DSPA56371

DSPA56371 FREESCALE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 124

Technical content

© Freescale Semiconductor, Inc., 2005. All rights reserved. DSP56371 Technical Data Freescale Semiconductor Technical Data DSP56371 Rev. 3, 1/2005 This document contains certain information on a new prod uct. Spe cifications and information herein a re subject to chang e without notice.

1 Introduction

The DSP56371 is a high density CMOS device with 5.0-volt compatible inputs and outputs. NOTE This document contains information on a new product. Specifications and information herein are subject to change without notice. Finalized specifications may be published after further characterization and device qualifications are completed.

2 DSP56371 Overview

2.1 Introduction

This manual describes the DSP56371 24-bit digital signal processor (DSP), its memory, operating modes and peripheral modules. The DSP56371 is a member of the DSP56300 family of programmable CMOS DSPs. The DSP56371 is targeted to applications that require digital audio compression/decompression, sound field processing, acoustic equalization and other digital audio algorithms. Changes in core functionality specific to the DSP56371 are also described in this manual. See Figure 1. for the block diagram of the DSP56371. Table of Contents Section Page 3 Signal/Connection Descriptions.... 8

11 Reset, Stop, Mode Select, and

12 Serial Host Interface SPI Protocol

13 Serial Host Interface (SHI) I2C

14 Enhanced Serial Audio Interface

15 Digital Audio Transmitter Timing51

21 Power Consumption Benchmark63

2 DSP56371 Technical Data Freescale Semiconductor

Figure 1. DSP56371 Block Diagram

2.2 DSP56300 Core Description

The DSP56371 uses the DSP56300 core, a high-performance, single clock cycle per instruction engine that provides up to twice the performance of Motorola's popular DSP56000 core family while retaining code compatibility with it. The DSP56300 core family offers a new level of performance in speed and power, provided by its rich instruction set and low power dissipation, thus enabling a new generation of wireless, telecommunications and multimedia products. For a description of the DSP56300 core, see Section 2.4 DSP56300 Core Functional Blocks. Significant architectural enhancements to the DSP56300 core family include a barrel shifter, 24-bit addressing, an instruction patch module and direct memory access (DMA). The DSP56300 core family members contain the DSP56300 core and additional modules. The modules are chosen from a library of standard predesigned elements such as memories and peripherals. New modules may be added to the library to meet customer specifications. A standard interface between the DSP56300 core and the on-chip memory and peripherals supports a wide variety of memory and peripheral configurations. Refer to DSP56371 User Manual, Section 3, Memory Configuration. Core features are described fully in the DSP56300 Family Manual. Pinout, memory and peripheral features are described in this manual. PLL OnCE™ Clock Gen- erator YAB XAB PAB YDB XDB PDB GDB MODB/IRQB MODC/IRQC MODD/IRQD DSP56300 24-Bit DDB DAB Peripheral Core YM_EB XM_EB PM_EB PIO_EB Expansion Area JTAG RESET MODA/IRQA PINIT/NMI EXTAL Address Generation Unit Six Channel DMA Unit Program Interrupt Controller Program Decode Controller Program Address Generator Data ALU 24 × 24+56→56-bit MAC Two 56-bit Accumulators 56-bit Barrel Shifter Power Mngmnt. Memory Expansion Area X Data RAM 36K × 24 Y Data RAM 48K × 24 Bootstrap ROM Internal Data Bus Switch SHI Triple ESAI ESAI_1 EFCOP Interface Timer Interface Interface GPIO ROM 32K × 24 ROM 32K × 24 Program RAM 4K × 24 ROM 64K × 24 DAX

Freescale Semiconductor DSP56371 Technical Data 3

• DSP56300 modular chassis — 181 Million Instructions Per Second (MIPS) with a 181 MHz clock at an internal logic supply (QVDDL) of 1.25V. — Object Code Compatible with the 56K core. — Data ALU with a 24 x 24 bit multiplier-accumulator and a 56-bit barrel shifter. 16-bit arithmetic support. — Program Control with position independent code support and instruction patch support. — EFCOP running concurrently with the core, capable of executing 181 million filter taps per second at peak performance. — Six-channel DMA controller. — Low jitter, PLL based clocking with a wide range of frequency mu ltiplications (1 to 255), predivider factors (1 to 31) and power saving clock divider (2 i: i=0 to 7). Reduces clock noise. — Internal address tracing support and OnCE for Hardware/Software debugging. — JTAG port. — Very low-power CMOS design, fully static design with operating frequencies down to DC. — STOP and WAIT low-power standby modes.  On-chip Memory Configuration — 48Kx24 Bit Y -Data RAM and 32Kx24 Bit Y -Data ROM. — 36Kx24 Bit X-Data RAM and 32Kx24 Bit X-Data ROM. — 64Kx24 Bit Program and Bootstrap ROM. — 4Kx24 Bit Program RAM. — PROM patching mechanism. — Up to 32Kx24 Bit from Y Data RAM and 8Kx24 Bit from X Data RAM can be switched to Program RAM resulting in up to 44Kx24 Bit of Program RAM.  Peripheral modules — Enhanced Serial Audio Interface (ESAI): up to 4 rece ivers and up to 6 transmitters, master or slave. I 2S, Left justified, Right justified, Sony, AC97, network and other programmable protocols. — Enhanced Serial Audio Interface I (ESAI_1): up to 4 rece ivers and up to 6 transmitters, master or slave. I2S, Left justified, Right justified, Sony, AC97, network and other programmable protocols. — Serial Host Interface (SHI): SPI and I 2C protocols, multi master capability in I2C mode, 10-word receive FIFO, support for 8, 16 and 24-bit words. — Triple Timer module (TEC). — 11 dedicated GPIO pins — Digital Audio Transmitter (DAX): 1 serial transmitter capable of supporting the SPDIF , IEC958, CP-340 and AES/EBU digital audio formats. — Pins of unused peripherals (except SHI) may be programmed as GPIO lines.

2.3 DSP56371 Audio Pr ocessor Architecture

This section defines the DSP56371 audio processor architecture. The audio processor is composed of the following units:  The DSP56300 core is composed of the Data ALU, Addre ss Generation Unit, Program Controller, DMA Controller, Memory Module Interface, Peripheral Module Interface and the On-Chip Emulator (OnCE). The DSP56300 core is described in the document DSP56300 24-Bit Digital Signal Processor Family Manual, Motorola publication DSP56300FM/AD.  Phased Lock Loop and Clock Generator  Memory modules.  Peripheral modules. The peripheral modules are defined in the following sections. Memory sizes in the block diagram are defaults. Memory may be differently partitioned, according to the memory mode of the chip. See Section 2.4.7 On-Chip Memory for more details about memory size.

2.4 DSP56300 Core Functional Blocks

The DSP56300 core provides the following functional blocks:  Data arithmetic logic unit (Data ALU)  Address generation unit (AGU)

4 DSP56371 Technical Data Freescale Semiconductor

 Program control unit (PCU)  DMA controller (with six channels)  Instruction patch controller  PLL-based clock oscillator  OnCE module  Memory In addition, the DSP56371 provides a set of on-chip peripherals, described in Section 2.5 Peripheral Overview.

2.4.1 Data ALU

The Data ALU performs all the arithmetic and logical operations on data operands in the DSP56300 core. The components of the Data ALU are as follows:  Fully pipelined 24-bit × 24-bit parallel multiplier-accumulator (MAC)  Bit field unit, comprising a 56-bit parallel barrel shifter (fas t shift and normalization; bit stream generation and parsing)  Conditional ALU instructions  24-bit or 16-bit arithmetic support under software control  Four 24-bit input general purpos e registers: X1, X0, Y1 and Y0  Six Data ALU registers (A2, A1, A0, B2, B1 and B0) that ar e concatenated into two general purpose, 56-bit accumulators (A and B), accumulator shifters  Two data bus shifter/limiter circuits

2.4.1.1 Data ALU Registers

The Data ALU registers can be read or written over the X memory data bus (XDB) and the Y memory data bus (YDB) as 24- or 48-bit operands (or as 16- or 32-bit operands in 16-bit arithmetic mode). The source operands for the Data ALU, which can be 24, 48, or 56 bits (16, 32, or 40 bits in 16-bit arithmetic mode), always originate from Data ALU registers. The results of all Data ALU operations are stored in an accumulator. All the Data ALU operations are performed in two clock cycles in pipeline fashion so that a new instruction can be initiated in every clock, yielding an effective execution rate of one instruction per clock cycle. The destination of every arithmetic operation can be used as a source operand for the immediately following arithmetic operation without a time penalty (i.e., without a pipeline stall).

2.4.1.2 Multiplier-Accumulator (MAC)

The MAC unit comprises the main arithmetic processing unit of the DSP56300 core and performs all of the calculations on data operands. In the case of arithmetic instructions, the unit accepts as many as three input operands and outputs one 56-bit result of the following form- Extension:Most Significant Product:Least Significant Product (EXT:MSP:LSP). The multiplier executes 24-bit × 24-bit, parallel, fractional multiplies, between two’s-complement signed, unsigned, or mixed operands. The 48-bit product is right-justified and added to the 56-bit contents of either the A or B accumulator. A 56-bit result can be stored as a 24-bit operand. The LSP can either be truncated or rounded into the MSP. Rounding is performed if specified.

Freescale Semiconductor DSP56371 Technical Data 5

2.4.2 Address Generation Unit (AGU)

The AGU performs the effective address calculations using integer arithmetic necessary to address data operands in memory and contains the registers used to generate the addresses. It implements four types of arithmetic: linear, modulo, multiple wrap- around modulo and reverse-carry. The AGU operates in parallel with other chip resources to minimize address-generation overhead. The AGU is divided into two halves, each with its own Address ALU. Each Address ALU has four sets of register triplets, and each register triplet is composed of an address register, an offset register and a modifier register. The two Address ALUs are identical. Each contains a 24-bit full adder (called an offset adder). A second full adder (called a modulo adder) adds the summed result of the first full adder to a modulo value that is stored in its respective modifier register. A third full adder (called a reverse-carry adder) is also provided. The offset adder and the reverse-carry adder are in parallel and share common inputs. The only difference between them is that the carry propagates in opposite directions. Test logic determines which of the three summed results of the full adders is output. Each Address ALU can update one address register from its respective address register file during one instruction cycle. The contents of the associated modifier register specifies the type of arithmetic to be used in the address register update calculation. The modifier value is decoded in the Address ALU.

2.4.3 Program Control Unit (PCU)

The PCU performs instruction prefetch, instruction decoding, hardware DO loop control and exception processing. The PCU implements a seven-stage pipeline and controls the different processing states of the DSP56300 core. The PCU consists of the following three hardware blocks:  Program decode controller (PDC)  Program address generator (PAG)  Program interrupt controller The PDC decodes the 24-bit instruction loaded into the instruction latch and generates all signals necessary for pipeline control. The PAG contains all the hardware needed for program address generation, system stack and loop control. The Program interrupt controller arbitrates among all interrupt requests (internal interrupts, as well as the five external requests: IRQA, IRQB, IRQC, IRQD and NMI) and generates the appropriate interrupt vector address. PCU features include the following:  Position independent code support  Addressing modes optimized for DSP applic ations (including immediate offsets)  On-chip instruction cache controller  On-chip memory-expandable hardware stack  Nested hardware DO loops  Fast auto-return interrupts The PCU implements its functions using the following registers:  PC—program counter register  SR—Status register  LA—loop address register  LC—loop counter register  VBA—vector base address register  SZ—stack size register  SP—stack pointer  OMR—operating mode register  SC—stack counter register The PCU also includes a hardware system stack (SS).

6 DSP56371 Technical Data Freescale Semiconductor

2.4.4 Internal Buses

To provide data exchange between blocks, the following buses are implemented:  Peripheral input/output expansion bus (PIO_EB) to peripherals  Program memory expansion bus (PM_EB) to program memory  X memory expansion bus (XM_EB) to X memory  Y memory expansion bus (YM_EB) to Y memory  Global data bus (GDB) between registers in the DMA, AGU, OnCE, PLL, BIU and PCU, as well as the memory-mapped registers in the peripherals  DMA data bus (DDB) for carrying DMA data between memories and/or peripherals  DMA address bus (DAB) for carrying DMA addresses to memories and peripherals  Program Data Bus (PDB) for carrying program data throughout the core  X memory Data Bus (XDB) for carrying X data throughout the core  Y memory Data Bus (YDB) for carrying Y data throughout the core  Program address bus (PAB) for carrying program memory addresses throughout the core  X memory address bus (XAB) for carrying X memory addresses throughout the core  Y memory address bus (YAB) for carrying Y memory addresses throughout the core All internal buses on the DSP56300 family members are 24-bit buses. See Figure 1.

2.4.5 Direct Memory Access (DMA)

The DMA block has the following features:  Six DMA channels supporting internal and external accesses  One-, two- and three-dimensional transfers (including circular buffering)  End-of-block-transfer interrupts  Triggering from interrupt lines and all peripherals

2.4.6 PLL-based Clock Oscillator

The clock generator in the DSP56300 core is composed of two main blocks: the PLL, which performs clock input division, frequency multiplication, skew elimination and the clock generator (CLKGEN), which performs low-power division and clock pulse generation. PLL-based clocking:  Allows change of low-power divide factor (DF) without loss of lock  Provides output clock with skew elimination  Provides a wide range of frequency multiplications (1 to 255), predivider factors (1 to 31), PLL feedback multiplier (2 or 4), Output divide factor (1, 2 or 4) and a power-saving clock divider (2i: i = 0 to 7) to reduce clock noise The PLL allows the processor to operate at a high internal clock frequency using a low frequency clock input. This feature offers two immediate benefits:  A lower frequency clock input redu ces the overall electromagnetic interference generated by a system.  The ability to oscillate at different frequencies reduces cost s by eliminating the need to add additional oscillators to a system. NOTE The PLL will momentarily overshoot the target frequency when the PLL is first enabled or when the VCO frequency is modified. It is important that when modifying the PLL frequency or enabling the PLL that the two step procedure defined in Section 3, DSP56371 Overview be followed.

2.4.7 On-Chip Memory

The memory space of the DSP56300 core is partitioned into program memory space, X data memory space and Y data memory space. The data memory space is divided into X and Y data memory in order to work with the two Address ALUs and to feed two operands simultaneously to the Data ALU. Memory space includes internal RAM and ROM and can not be expanded off-chip. There is an instruction patch module. The patch module is used to patch program ROM. The memory switch mode is used to increase the size of program RAM as needed (switch from X data RAM and/or Y data RAM).

Freescale Semiconductor DSP56371 Technical Data 7 There are on-chip ROMs for program and bootstrap memory (64K x 24-bit), X ROM (32K x 24-bit) and Y ROM(32K x 24-bit). More information on the internal memory is provided in DSP56371 User Manual, Section 3, MemorySection 3, .

2.4.8 Off-Chip Memory Expansion

Memory cannot be expanded off-chip. There is no external memory bus.

2.5 Peripheral Overview

The DSP56371 is designed to perform a wide variety of fixed-point digital signal processing functions. In addition to the core features previously discussed, the DSP56371 provides the following peripherals:  As many as 39 dedicate or user-configurab le general purpose input/output (GPIO) signals  Timer/event counter (TEC) module, containing three independent timers  Memory switch mode in on-chip memory  Four external interrupt/mode control lines and one external non-maskable interrupt line  Enhanced serial audio interface (ESAI) with up to four receivers and up to six transmitters, master or slave, using the I 2S, Sony, AC97, network and other programmable protocols  A second enhanced serial audio interface (ESAI_1) with up to f our receivers and up to six transmitters, master or slave, using the I2S, Sony, AC97, network and other programmable protocols.  Serial host interface (SHI) using SPI and I 2C protocols, with multi-master capability, 10-word receive FIFO and support for 8-, 16- and 24-bit words  A Digital audio transmitter (DAX): a serial transmitter capable of supporting the SPDIF , IEC958, CP-340 and AES/EBU digital audio formats

2.5.1 General Purpose Input/Output (GPIO)

The DSP56371 provides 11 dedicated GPIO and 28 programmable signals that can operate either as GPIO pins or peripheral pins (ESAI, ESAI_1, DAX, and TEC). The signals are configured as GPIO after hardware reset. Register programming techniques for all GPIO functionality among these interfaces are very similar and are described in the following sections.

2.5.2 Triple Timer (TEC)

This section describes a peripheral module composed of a common 21-bit prescaler and three independent and identical general purpose 24-bit timer/event counters, each one having its own register set. Each timer can use internal or external clocking and can interrupt the DSP after a specified number of events (clocks). Two of the three timers can signal an external device after counting internal events. Each timer can also be used to trigger DMA transfers after a specified number of events (clocks) occurred. Two of the three timers connect to the external world through bidirectional pins (TIO0, TIO1). When a TIO pin is configured as input, the timer functions as an external event counter or can measure external pulse width/signal period. When a TIO pin is used as output the timer is functioning as either a timer, a watchdog or a Pulse Width Modulator. When a TIO pin is not used by the timer it can be used as a General Purpose Input/Output Pin. Refer to DSP56371 User Manual, Section 11, Triple Timer Module.

2.5.3 Enhanced Serial Audio Interface (ESAI)

The ESAI provides a full-duplex serial port for serial communication with a variety of serial devices including one or more industry- standard codecs, other DSPs, microprocessors and peripherals that implement the Motorola SPI serial protocol. The ESAI consists of independent transmitter and receiver sections, each with its own clock generator. It is a superset of the DSP56300 family ESSI peripheral and of the DSP56000 family SAI peripheral. For more information on the ESAI, refer to DSP56371 User Manual, Section 8, Enhanced Serial Audio Interface (ESAI).

2.5.4 Enhanced Serial Audio Interface 1 (ESAI_1)

The ESAI_1 is a second ESAI interface. The ESAI_1 is functionally identical to ESAI. For more information on the ESAI_1, refer to DSP56371 User Manual, Section 9, Enhanced Serial Audio Interface (ESAI_1).

2.5.5 Serial Host Interface (SHI)

The SHI is a serial input/output interface providing a path for communication and program/coefficient data transfers between the DSP and an external host processor. The SHI can also communicate with other serial peripheral devices. The SHI can interface directly to either of two well-known and widely used synchronous serial buses: the Motorola serial peripheral interface (SPI) bus

8 DSP56371 Technical Data Freescale Semiconductor

Signal/Connection Descriptions and the Philips inter-integrated-circuit control (I2C) bus. The SHI supports either the SPI or I2C bus protocol, as required, from a slave or a single-master device. To minimize DSP overhead, the SHI supports single-, double- and triple-byte data transfers. The SHI has a 10-word receive FIFO that permits receiving up to 30 bytes before generating a receive interrupt, reducing the overhead for data reception. For more information on the SHI, refer to DSP56371 User Manual, Section 7, Serial Host Interface.

2.5.6 Digital Audio Transmitter (DAX)

The DAX is a serial audio interface module that outputs digital audio data in the AES/EBU, CP-340 and IEC958 formats. For more information on the DAX, refer to DSP56371 User Manual, Section 10, Digital Audio.

3 Signal/Connectio n Descriptions

3.1 Signal Groupings

The input and output signals of the DSP56374 are organized into functional groups, which are listed in Table 1. and illustrated in Figure 2. The DSP56374 is operated from a 1.25 V and 3.3 V supply; however, some of the inputs can tolerate 5.0 V. A special notice for this feature is added to the signal descriptions of those inputs.

Signal/Connection Descriptions Freescale Semiconductor DSP56371 Technical Data 9 Table 1. DSP56374 Functional Signal Groupings

Description

Power (VDD) 12 Table 2. Ground (GND) 12 Table 3. Scan Pins 1 Table 4. Clock and PLL 2 Table 5. Interrupt and mode control 5 Table 6. SHI 5 Table 7. ESAI Port C1 12 Table 8. ESAI_1 Port E2 12 Table 9. SPDIF Transmitter (DAX) Port D3 2 Table 10. Dedicated GPIO Port F4 11 Table 11. Timer 2 Table 12. JTAG/OnCE Port 4 Table 13. Notes:1. Port C signals are the GPIO port signals which are multiplexed with the ESAI signals. 2. Port E signals are the GPIO port signals which are multiplexed with the ESAI_1 signals. 3. Port D signals are the GPIO port signals wh ich are multiplexed with the DAX signals. 4. Port F signals are the dedicated GPIO port signals.

10 DSP56371 Technical Data Freescale Semiconductor

Figure 2. Signals Identified by Functional Group

3.2 Power

Figure 3. VDD Connections Table 2. Power Inputs external decoupling capacitors. external decoupling capacitors. and the input should be provided with an extremely low impedance path to the 3.3 VDD power rail. adequate external decoupling capacitors.

60 FST_PE4

59 SDO5_SDI0_PE6

58 SDO4_SDI1_PE7

57 SDO3_SDI2_PE8

56 SDO2_SDI3_PE9

55 SDO1_PE10

54 SDO0_PE11

53 CORE_GND

52 CORE_VDD

51 MODB_IRQA

50 MODB_IRQB

49 MODC_IRQC

48 MODD_IRQD

47 RESET_B

46 PINIT_NMI

45 EXTAL

44 PLLD_VDD

43 PLLD_GND

42 PLLP_GND

41 PLLP_VDD

0 SDO5_SDI0_PC6

79 FST_PC4

78 FSR_PC1

77 SCKT_PC3

76 SCKR_PC0

75 IO_VDD

74 IO_GND

73 HCKT_PC5

72 HCKR_PC2

71 CORE_VDD

70 ACI_PD0

69 ADO_PD1

68 CORE_GND

67 HCKR_PE2

66 HCKT_PE5

65 IO_GND

64 IO_VDD

63 SCKR_PE0

62 SCKT_PE3

61 FSR_PE1

12 DSP56371 Technical Data Freescale Semiconductor

3.3 Ground

3.4 SCAN

3.5 Clock and PLL

3.6 Interrupt and Mode Control

deasserted, these inputs are hardware interrupt request lines. Table 3. Grounds ground. The user must provide adequate external decoupling capacitors. ground. The user must provide adequate external decoupling capacitors. must provide adequate external decoupling capacitors. connections. The user must provide adequate external decoupling capacitors. Table 4. SCAN signals SCAN Input Input SCAN—Manufacturing test pin. This pin should be pulled low. Internal Pull down resistor. Table 5. Clock and PLL Signals in order to supply the clock to the internal clock generator and PLL. This input cannot tolerate 5 V. synchronized to internal system clock.

Table 6. Interrupt and Mode Control the MODA/IRQA pin is pulled to GND, the processor will exit the stop state.

14 DSP56371 Technical Data Freescale Semiconductor

3.7 Serial Host Interface

The SHI has five I/O signals that can be configured to allow the SHI to operate in either SPI or I2C mode. operating mode is latched from the MODA, MODB, MODC and MODD inputs. must be supplied while RESET is being asserted. Table 7. Serial Host Interface Signals there is no need for an external pull-up in this state. Table 6. Interrupt and Mode Control (Continued)

transactions. The data in SDA must be stable during the high period of SCL. there is no need for an external pull-up in this state. input when configured for the SPI Slave mode. there is no need for an external pull-up in this state. Table 7. Serial Host Interface Signals (Continued)

16 DSP56371 Technical Data Freescale Semiconductor

there is no need for an external pull-up in this state. to proceed to the next transfer.

3.8 Enhanced Serial Audio Interface

Table 8. Enhanced Serial Audio Interface Signals converters [DACs]) or as an additional system clock. The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

18 DSP56371 Technical Data Freescale Semiconductor

external buffer enable control (TEBE=1, RFSD=1). or the slot in network mode. The default state after reset is GPIO disconnected. Internal Pull down resistor. (TFSD) bit in the ESAI transmit clock control register (TCCR). The default state after reset is GPIO disconnected. Internal Pull down resistor. Table 8. Enhanced Serial Audio Interface Signals (Continued)

or the slot in network mode. The default state after reset is GPIO disconnected. Internal Pull down resistor. enabled transmitters in asynchronous mode. The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

20 DSP56371 Technical Data Freescale Semiconductor

The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

The default state after reset is GPIO disconnected. Internal Pull down resistor. TX1 serial transmit shift register. The default state after reset is GPIO disconnected. Internal Pull down resistor. TX0 serial transmit shift register. The default state after reset is GPIO disconnected. Internal Pull down resistor.

22 DSP56371 Technical Data Freescale Semiconductor

3.9 Enhanced Serial Audio Interface_1

Table 9. Enhanced Serial Audio Interface_1 Signals the ESAI_1 receiver as an alternate to the DSP core clock. converters [DACs]) or as an additional system clock. The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

transmitter external buffer enable control (TEBE=1, RFSD=1). normal mode or the slot in network mode. The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

24 DSP56371 Technical Data Freescale Semiconductor

in normal mode or the slot in network mode. The default state after reset is GPIO disconnected. Internal Pull down resistor. mode, or by all enabled transmitters in asynchronous mode. The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor. The default state after reset is GPIO disconnected. Internal Pull down resistor.

26 DSP56371 Technical Data Freescale Semiconductor

3.10 SPDIF Transmitter Di gital Audio Interface

the TX1 serial transmit shift register. The default state after reset is GPIO disconnected. Internal Pull down resistor. the TX0 serial transmit shift register. The default state after reset is GPIO disconnected. Internal Pull down resistor. Table 10. Digital Audio Interface (DAX) Signals The default state after reset is GPIO disconnected. Internal Pull down resistor.

3.11 Dedicated GP IO Interface

The default state after reset is GPIO disconnected. Internal Pull down resistor. Table 11. Dedicated GPIO Signals Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Table 10. Digital Audio Interface (DAX) Signals (Continued)

28 DSP56371 Technical Data Freescale Semiconductor

Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Internal Pull down resistor. Table 11. Dedicated GPIO Signals (Continued)

3.12 Timer

3.13 JTAG/OnCE Interface

Table 12. Timer Signal external event counter or in measurement mode, TIO0 is used as input. Internal Pull down resistor. external event counter or in measurement mode, TIO1 is used as input. Internal Pull down resistor. Table 13. JTAG/OnCE Interface test logic. It has an internal pull-up resistor. This input is 5 V tolerant..

30 DSP56371 Technical Data Freescale Semiconductor

4 Maximum Ratings

a maximum to a minimum represents a condition that can never exist. and shift-DR controller states. TDO changes on the falling edge of TCK. has an internal pull-up resistor. Table 14. Maximum Ratings Table 13. JTAG/OnCE Interface (Continued)

3 TJ -40 to +115 °C

1. Absolute maximum ratings are stress ratings only, and functional operation at the maximum is not guaranteed. Stress

beyond the maximum rating may affect device reliability or cause permanent damage to the device.

1. Operating temperature qualified for automotive applications.

Table 14. Maximum Ratings (Continued)

32 DSP56371 Technical Data Freescale Semiconductor

5 Power Requirements

recommended to be made between the DSP56371 IO_VDD and CORE_VDD power pins. external Schottcky is not used.

6 Thermal Characteristics

Table 15. Thermal Characteristics

1. Per SEMI G38-87 and JEDEC JESD51-2 with the single layer board horizontal.
2. Thermal resistance between the die and the case top su rface as measured by the cold plate method (MIL SPEC-

Table 16. DC ELECTRICAL CHARACTERISTICS4 Note: All 3.3 volt supplies must rise prior to the rise of the 1.25 volt supplies to avoid a high current condition and possible system damage.

4 CIN — — 10 pF

requirements in Normal mode. In order to obtain these results, all inputs must be terminated (i.e., not allowed to float). measured with VCORE_VDD = 1.30V, VIO_VDD) = 3.46V at TJ = 115°C.

1. In order to obtain these results, all inputs, which ar e not disconnected at Stop mode, must be terminated (i.e., not
2. Periodically sampled and not 100% tested

34 DSP56371 Technical Data Freescale Semiconductor

test machine VOL and VOH reference levels set at 1.0V and 1.8V, respectively. device AC test conditions are 5 MHz and rated speed.

9 Internal Clocks

Table 17. INTERNAL CLOCKS

1 Comparison Frequency Fref 1 5 -- 20 MHZ Fref = FN/NR

2 Input Clock Frequency FIN Fref*NR NR is input divider

3 Output clock Frequency (with

4 Output clock Frequency (with

5 Duty Cycle -- 40 50 60 % FVCO=300MHZ~60

Notes:1. See users manual for definition.

1. Maximum frequency will vary depending on the ordered part number.

10 External Clock Operation

The DSP56371 system clock is an externally supplied square wave voltage source connected to EXTAL (see Figure 4). Figure 4. External Clock Timing Table 18. Clock Operation 150 and 181 MHz Values

150 MHz 181 MHz

6 EXTAL input high 1,2

7 EXTAL input low 1,2

8 EXTAL cycle time 2

9 Instruction cycle time= I CYC = TC

1. The maximum value for PLL enabled is given for minimum V CO and maximum MF .
2. The maximum value for PLL enabled is given for minimum V CO and maximum DF .
3. The indicated duty cycle is for the specified maximum frequency for which a part is rated. The minimum clock high or low

and low time requirements are met. Note: The midpoint is 0.5 (V IH + VIL).

36 DSP56371 Technical Data Freescale Semiconductor

11 Reset, Stop, Mode Select, and Interrupt Timing

Table 19. Reset, Stop, Mode Select, and Interrupt Timing

10 Delay from RESET assertion to all output pins at

11 Required RESET duration4

12 Syn reset setup time from RESET

13 Syn reset de assert delay time

16 Minimum edge-triggered interrupt request

17 Minimum edge-triggered interrupt request

18 Delay from interrupt trigger to interrupt code

19 Duration of level sensitive IRQA assertion to

Figure 5. Reset Timing

21 Interrupt Requests Rate

22 DMA Requests Rate

recommended when using fast interrupts. Long interrupts are recommended when using Level-sensitive mode.

1. For PLL disable, using external clock (PCTL Bit 13 = 0), no stabilization delay is required and recovery time will be

defined by the OMR Bit 6 settings. PLL to get locked. The PLL lock procedure duration, PLL Lock Cycles (PLC), may be in the range of 0.5 ms.

1. Periodically sampled and not 100% tested

yet met, the device circuitry will be in an uninitialized state that can result in significant power consumption and heat-up. Designs should minimize this state to the shortest possible duration. Table 19. Reset, Stop, Mode Select, and Interrupt Timing (Continued)

38 DSP56371 Technical Data Freescale Semiconductor

Figure 6. Recovery from Stop State Using IRQA Interrupt Service Figure 7. External Interrupt Timing (Negative Edge-Triggered) Figure 8. External Fast Interrupt Timing

12 Serial Host Interface SPI Protocol Timing

Table 20. Serial Host Interface SPI Protocol Timing

26 Serial clock rise/fall time Master — 10 ns

27 SS assertion to first SCK edge

28 Last SCK edge to SS not asserted Slave 12 — ns

29 Data input valid to SCK edge (data input set-up time) Master/Slave 0 — ns

32 SS deassertion to data high impedance2 Slave — 9 ns

33 SCK edge to data out valid

34 SCK edge to data out not valid

35 SS assertion to data out valid

36 First SCK sampling edge to HREQ output deassertion Slave 50 — ns

37 Last SCK sampling edge to HREQ output not deasserted

40 HREQ in assertion to first SCK edge Master — — ns

41 HREQ in deassertion to last SCK sampling edge (HREQ in

42 First SCK edge to HREQ in not asserted

43 HREQ assertion width Master ns

1. Periodically sampled, not 100% tested

40 DSP56371 Technical Data Freescale Semiconductor

Figure 9. SPI Master Timing (CPHA = 0)

Figure 10. SPI Master Timing (CPHA = 1)

42 DSP56371 Technical Data Freescale Semiconductor

Figure 11. SPI Slave Timing (CPHA = 0)

Figure 12. SPI Slave Timing (CPHA = 1)

44 DSP56371 Technical Data Freescale Semiconductor

13 Serial Host Interface (SHI) I 2C Protocol Timing

Table 21. SHI I2C Protocol Timing

44 SCL clock frequency F SCL —1 0 0—4 0 0 k H z

50 SCL and SDA rise time T R —5—5 n s

51 SCL and SDA fall time T F —5—5 n s

52 Data set-up time T SU;DAT 250 — 100 — ns

57 HREQ in deassertion to last SCL edge (HREQ

58 First SCL sampling edge to HREQ output

59 Last SCL edge to HREQ output not deasserted T AS;RQO

60 HREQ in assertion to first SCL edge T AS;RQI

61 First SCL edge to HREQ in not asserted

13.1 Programming the Serial Clock

divide-by-eight pre-scaler is operational. When HRS is set, the pre-scaler is bypassed. — HDM[7:0] are the divider modulus select bits. A divide rati o from 1 to 256 (HDM[7:0] = $00 to $FF) may be selected. clock cycle (TSCL), as shown in Table 22. Figure 13. I2C Timing

46 DSP56371 Technical Data Freescale Semiconductor

14 Enhanced Serial Au dio Interface Timing

Table 22. Enhanced Serial Audio Interface Timing

63 Clock high period

64 Clock low period

65 SCKR rising edge to FSR out (bl) high — — —

66 SCKR rising edge to FSR out (bl) low — — —

67 SCKR rising edge to FSR out (wr) high 6 —— —

68 SCKR rising edge to FSR out (wr) low 6 —— —

69 SCKR rising edge to FSR out (wl) high — — —

70 SCKR rising edge to FSR out (wl) low — — —

71 Data in setu p time before SCKR (SCK in

73 FSR input (bl, wr) high before SCKR falling

78 SCKT rising edge to FST out (bl) high — — —

79 SCKT rising edge to FST out (bl) low — — —

80 SCKT rising edge to FST out (wr) high 6 —— —

82 SCKT rising edge to FST out (wr) low 6 —— —

83 SCKT rising edge to FST out (wl) high — — —

84 SCKT rising edge to FST out (wl) low — — —

85 SCKT rising edge to data out enable from

86 SCKT rising edge to transmitter #0 drive

87 SCKT rising edge to data out valid — — —

88 SCKT rising edge to data out high

89 SCKT rising edge to transmitter #0 drive

90 FST input (bl, wr) setup time before SCKT

91 FST input (wl) to data out enable from high

92 FST input (wl) to transmitter #0 drive enable

93 FST input (wl) setup time before SCKT falling

95 Flag output valid after SCKT rising edge — — —

Table 22. Enhanced Serial Audio Interface Timing (Continued)

48 DSP56371 Technical Data Freescale Semiconductor

1. SCKT(SCKT pin) = transmit clock
2. For the internal clock, the external clock cycl e is defined by Icyc and the ESAI control register.
3. The word-relative frame sync signal waveform relative to the clock operates in the same manner as the bit-length frame sync signal

clock of the first word in frame.

1. Periodically sampled and not 100% tested
2. ESAI_1 specs match those of ESAI_0

Figure 14. ESAI Transmitter Timing normal mode, the output flag state is asserted for the entire frame period.

50 DSP56371 Technical Data Freescale Semiconductor

Figure 15. ESAI Receiver Timing Figure 16. ESAI HCKT Timing Figure 17. ESAI HCKR Timing

15 Digital Audio Transmitter Timing

Figure 18. Digital Audio Transmitter Timing

16 Timer Timing

Figure 19. TIO Timer Event Input Restrictions Table 23. Digital Audio Transmitter Timing

181 MHz

99 ACI frequency (see note) 1 / (2 x T C)—9 0 M H z

Table 24. Timer Timing

52 DSP56371 Technical Data Freescale Semiconductor

17 GPIO Timing

Figure 20. GPIO Timing Table 25. GPIO Timing

106 FOSC edge to GPIO out valid (GPIO out delay time) — 7 ns

107 FOSC edge to GPIO out not valid (GPIO out hold time) ---- 7 ns

108 FOSC In valid to EXTAL edge (GPIO in set-up time) 2 --- ns

109 FOSC edge to GPIO in not valid (GPIO in hold time) 0 --- ns

110 Minimum GPIO pulse high width (except Port F) 2 x T

114 GPIO out rise time — — 13 ns

115 GPIO out fall time — — 13 ns

18 JTAG Timing

Figure 21. Test Clock Input Timing Diagram Table 26. JTAG Timing All timings apply to OnCE module data transfers because it uses the JTAG port as an interface.

54 DSP56371 Technical Data Freescale Semiconductor

Figure 22. Debugger Port Timing Diagram Figure 23. Test Access Port Timing Diagram

Package Information

Freescale Semiconductor DSP56371 Technical Data 55 Figure 24. DSP56371 Pinout

51 MODA_IRQA

80 SDO5_SDI0_PC6

56 DSP56371 Technical Data Freescale Semiconductor

Table 27. Signal Identification by Pin Number

1 SDO4_SDI1_PC7 21 PF9 41 PLLP_VDD 61 FSR_PE1

2 IO_GND 22 SCAN 42 PLLP_GND 62 SCKT_PE3

3 IO_VDD 23 PF10 43 PLLD_GND 63 SCKR_PE0

4 SDO3_SDI2_PC8 24 IO_GND 44 PLLD_VDD 64 IO_VDD

5 SDO2_SDI3_PC9 25 IO_VDD 45 EXTAL 65 IO_GND

6 SDO1_PC10 26 TI0_PB0 46 PINIT_NMI 66 HCKT_PE5

7 SDO0_PC11 27 TI0_PB1 47 RESET_B 67 HCKR_PE2

8 CORE_VDD 28 CORE_GND 48 MODD_IRQD 68 CORE_GND

9 PF8 29 CORE_VDD 49 MODC_IRQC 69 ADO_PD1

10 PF6 30 TDO 50 MODB_IRQB 70 ADI_PD0

11 PF7 31 TDI 51 MODA_IRQA 71 CORE_VDD

12 CORE_GND 32 TCK 52 CORE_VDD 72 HCKR_PC2

13 PF2 33 TMS 53 CORE_GND 73 HCKT2_PC5

15 PF4 35 MISO_SDA 55 SDO1_PE10 75 IO_VDD

16 PF5 36 SCK_SCL 56 SDO2_SDI3_PE9 76 SCKR_PC0

17 IO_VDD 37 SS_HA2 57 SDO3_SDI2_PE8 77 SCKT_PC3

18 PF1 38 HREQ 58 SDO4_SDI1_PE7 78 FSR_PC1

19 PF0 39 PLLA_VDD 59 SDO5_SD10_PE6 79 FST_PC4

20 GND 40 PLLA_GND 60 FST_PE4 80 SDO5_SDI10_PC6

Freescale Semiconductor DSP56371 Technical Data 57

58 DSP56371 Technical Data Freescale Semiconductor

Freescale Semiconductor DSP56371 Technical Data 59

60 DSP56371 Technical Data Freescale Semiconductor

Freescale Semiconductor DSP56371 Technical Data 61

20 Design Considerations

20.1 Thermal Design Considerations

An estimation of the chip junction temperature, TJ, in °C can be obtained from the following equation: Where:TA = ambient temperature °C RqJA = package junction-to-ambient thermal resistance °C/W PD = power dissipation in package W Historically, thermal resistance has been expressed as the sum of a junction-to-case thermal resistance and a case-to-ambient thermal resistance. Where:RθJA = package junction-to-ambient thermal resistance °C/W RθJC = package junction-to-case thermal resistance °C/W RθCA = package case-to-ambient thermal resistance °C/W RθJC is device-related and cannot be influenced by the user. The user controls the thermal environment to change the case-to- ambient thermal resistance, RθCA. For example, the user can change the air flow around the device, add a heat sink, change the mounting arrangement on the printed circuit board (PCB), or otherwise change the thermal dissipation capability of the area surrounding the device on a PCB. This model is most useful for ceramic packages with heat sinks; some 90% of the heat flow is dissipated through the case to the heat sink and out to the ambient environment. For ceramic packages, in situations where the heat flow is split between a path to the case and an alternate path through the PCB, analysis of the device thermal performance may need the additional modeling capability of a system level thermal simulation tool. The thermal performance of plastic packages is more dependent on the temperature of the PCB to which the package is mounted. Again, if the estimations obtained from RθJA do not satisfactorily answer whether the thermal performance is adequate, a system level model may be appropriate. A complicating factor is the existence of three common ways for determining the junction-to-case thermal resistance in plastic packages.  To minimize temperature variation across the surface, the thermal resistance is measured from the junction to the outside surface of the package (case) closest to the chip mounting area when that surface has a proper heat sink.  To define a value approximately equal to a junction-to-board thermal resistance, the thermal resistance is measured from the junction to where the leads are attached to the case.  If the temperature of the package case (T T) is determined by a thermocouple, the thermal resistance is computed using the value obtained by the equation J – TT)/PD. As noted above, the junction-to-case thermal resistances quoted in this data sheet are determined using the first definition. From a practical standpoint, that value is also suitable for determining the junction temperature from a case thermocouple reading in forced convection environments. In natural convection, using the junction-to-case thermal resistance to estimate junction temperature from a thermocouple reading on the case of the package will estimate a junction temperature slightly hotter than actual temperature. Hence, the new thermal metric, thermal characterization parameter or ΨJT, has been defined to be (TJ – TT)/PD. This value gives a better estimate of the junction temperature in natural convection when using the surface temperature of the package. Remember that surface temperature readings of packages are subject to significant errors caused by inadequate attachment of the sensor to the surface and to errors caused by heat loss to the sensor. The recommended technique is to attach a 40-gauge thermocouple wire and bead to the top center of the package with thermally conductive epoxy. TJ TA PD RθJA×()+= RθJA RθJC RθCA+=

62 DSP56371 Technical Data Freescale Semiconductor

20.2 Electrical D esign Considerations

Use the following list of recommendations to assure correct DSP operation:  Provide a low-impedance path from the board power supply to each V CC pin on the DSP and from the board ground to each GND pin.  Use at least six 0.01–0.1 µF bypass capacitors positioned as close as possible to the four sides of the package to connect the VCC power source to GND.  Ensure that capacitor leads and associated printe d circuit traces that connect to the chip VCC and GND pins are less than 1.2 cm (0.5 inch) per capacitor lead.  Route the DVDD pin carefully to minimize noise.  Use at least a four-layer PCB with two inner layers for V CC and GND.  Because the DSP output signals have fast rise and fall times, PCB trace lengths should be minimal. This recommendation particularly applies to the IRQA, IRQB, IRQC, and IRQD pins. Maximum PCB trace lengths on the order of 15 cm (6 inches) are recommended.  Consider all device loads as well as par asitic capacitance due to PCB traces when calculating capacitance. This is especially critical in systems with higher capacitive loads that could create higher transient currents in the VCC and GND circuits.  Take special care to minimize noise levels on the V CCP and GNDP pins.  If multiple DSP56371 devices are on the same board, check for cross-talk or excessive spikes on the supplies due to synchronous operation of the devices.  RESET must be asserted when the chip is powered up. A stable EXTAL signal must be supplied before deassertion of RESET.  At power-up, ensure that the voltage difference between the 3.3 V tolerant pins and the chip VCC never exceeds a 3.00 V.

20.3 Power Consumption Considerations

Power dissipation is a key issue in portable DSP applications. Some of the factors which affect current consumption are described in this section. Most of the current consumed by CMOS devices is alternating current (ac), which is charging and discharging the capacitances of the pins and internal nodes. Current consumption is described by the following formula: where C = node/pin capacitance V = voltage swing f = frequency of node/pin toggle CAUTION This device contains circuitry protecting against damage due to high static voltage or electrical fields. However, normal precautions should be taken to avoid exceeding maximum voltage ratings. Reliability of operation is enhanced if unused inputs are tied to an appropriate logic voltage level (e.g., either GND or V CC). The suggested value for a pullup or pulldown resistor is 10 k ohm. IC V × f×=

Power Consumption Benchmark Freescale Semiconductor DSP56371 Technical Data 63 The maximum internal current (ICCImax) value reflects the typical possible switching of the internal buses on best-case operation conditions, which is not necessarily a real application case. The typical internal current (ICCItyp) value reflects the average switching of the internal buses on typical operating conditions. For applications that require very low current consumption, do the following:  Minimize the number of pins that are switching.  Minimize the capacitive load on the pins. One way to evaluate power consumption is to use a current per MIPS measurement methodology to minimize specific board effects (i.e., to compensate for measured board current not caused by the DSP). Use the test algorithm, specific test current measurements, and the following equation to derive the current per MIPS value. I/MIPS = I/MHz = (ItypF2 - ItypF1)/(F2 - F1) where :I typF2 = current at F2 ItypF1 = current at F1 F2 = high frequency (any specified operating frequency) F1 = low frequency (any specified operating frequency lower than F2) NOTE F1 should be significantly less than F2. For example, F2 could be 66 MHz and F1 could be 33 MHz. The degree of difference between F1 and F2 determines the amount of precision with which the current rating can be determined for an application.

21 Power Consumption Benchmark

The following benchmark program permits evaluation of DSP power usage in a test situation. ;* ;* CHECKS Typical Power Consumption ORG P:$000800 move #$000000,r1 move #$000000,r0 do #1024,ldmem move r1,p:(r0) move r1,y:(r0)+ ldmem nop move #0,b1 ;jmp $FF2AE0 ;org P:$FF2AE0 move b1,y:>$100 Power Consumption Example For a GPIO address pin loaded with 50 pF capacitance, operating at 3.3 V, and with a 150 MHz clock, toggling at its maximum possible rate (75 MHz), the current consumption is I5 0 x10 12– x3.3x75x106 12.375mA==

64 DSP56371 Technical Data Freescale Semiconductor

Power Consumption Benchmark move #$FF,B move #>$AF080,X0 move #>$FF2AD6,r0 move #$0,r1 dor #6,loop1 move p:(r0)+,x1 move x0,p:(r1)+ move x1,p:(r1)+ nop loop1 move #$0,vba move #$0,sp move #$0,sc reset move #$FFFFFF,m0 move m0,m1 move m0,m2 move m0,m3 move m0,m4 move m0,m5 move m0,m6 move m0,m7 move #>$102,ep move #>$18,sz move #>$110000,omr move #$300,sr movep #>$F02000,X:$FFFFFF movep #$187,X:$FFFFFE ;then sets up BCR and AAR registers ;then sets up PORTB and HDI08 PORT andi #$FC,mr ;start running ROM intialisation stage ;jsr $FF1C7E ; Set green HLX zone table jsr $FF1D64 ; Run GPIONil function jsr $FF2F82 ; Initialise Green HLX jsr $FF1FA1 ; Disable DAX move #>$15F,x1 move x1,P:$FF0D7F ; Run Green HLX jmp $FF1FDB nop nop nop nop nop nop

Power Consumption Benchmark Freescale Semiconductor DSP56371 Technical Data 65 dor forever,endprog nop nop endprog nop

66 DSP56371 Technical Data Freescale Semiconductor

22 IBIS Model

[IBIS ver] 2.1 [File name] tpz013g3.ibs [File Rev] 1.0 [Date] 07/30/2002 [Source] Made By 0.13uu HSPICE model. [Disclaimer] This information is for modeling purposes only and is not guaranteed. [Copyright] Copyright 2002, Design Service, tsmc, All Rights Reserved. | Component tpz013g3 (Pin) signal_name model_name

1 SDO4_SDI1_PC7 PRD12DGZ

2 IO_GND PVSS3DGZ

3 IO_VDD PVDD2DGZ

4 SDO3_SDI2_PC8 PRD12DGZ

5 SDO2_SDI3_PC9 PRD12DGZ

6 SDO1_PC10 PRD12DGZ

7 SDO0_PC11 PRD12DGZ

8 CORE_VDD PVDD1DGZ

9 PF8 PRD12DGZ

10 PF6 PRD12DGZ

11 PF7 PRD12DGZ

12 CORE_GND PVSS3DGZ

13 PF2 PRD12DGZ

14 PF3 PRD12DGZ

15 PF4 PRD12DGZ

16 PF5 PRD12DGZ

17 IO_VDD PVDD2DGZ

18 PF1 PRD12DGZ

19 PF0 PRD12DGZ

Freescale Semiconductor DSP56371 Technical Data 67

20 GND PVSS2DGZ

21 PF9 PRD12DGZ

22 SCAN PDDDGZ

23 PF10 PRD12DGZ

24 IO_GND PVSS3DGZ

25 IO_VDD PVDD2DGZ

26 TI0_PB0 PVDD2DGZ

27 TI1_PB1 PVDD2DGZ

28 CORE_GND PVSS3DGZ

29 CORE_VDD PVDD1DGZ

30 TDO PRT24DGZ

31 TDI PDUDGZ

32 TCK PDUDGZ

33 TMS PDUDGZ

34 MOSI_HA0 PRD12DGZ

35 MISO_SDA PRD12DGZ

36 SCK_SCL PRD16DGZ

37 SS_HA2 PDUSDGZ

38 HREQ PRD12DGZ

39 PLLA_VDD PVDD1P

40 PLLA_GND PVSS1P

41 PLLP_VDD PVDD2DGZ

42 PLLP_GND PVSS2P

43 PLLD_GND PVSS1P

44a PLLD_VDD PVDD1PC 44b PLLD_VDD PVDD1DGZ

45 EXTAL PDIDGZ

46 PINIT_NMI PDUSDGZ

47 RESET_B PDUSDGZ

48 MODD_IRQD PDUSDGZ

49 MODC_IRQC PDUSDGZ

50 MODB_IRQB PDUSDGZ

51 MODA_IRQA PDUSDGZ

68 DSP56371 Technical Data Freescale Semiconductor

52 CORE_VDD PVDD1DGZ

53 CORE_GND PVSS3DGZ

54 SDO0_PE11 PRD12DGZ

55 SDO1_PE10 PRD12DGZ

56 SDO2_SDI3_PE9 PRD12DGZ

57 SDO3_SDI2_PE8 PRD12DGZ

58 SDO4_SDI1_PE7 PRD12DGZ

59 SDO5_SDI0_PE6 PRD12DGZ

60 FST_PE4 PRD12DGZ

61 FSR_PE1 PRD12DGZ

62 SCKT_PE4 PRD12DGZ

63 SCKR_PE0 PRD12DGZ

64 IO_VDD PVDD2DGZ

65 IO_GND PVSS3DGZ

66 HCKT_PE5 PRD12DGZ

67 HCKR_PE2 PRD12DGZ

68 CORE_GND PVSS3DGZ

69 ADO_PD1 PRD24DGZ

70 ADI_PD2 PRD24DGZ

71 CORE_VDD PVDD1DGZ

72 HCKR_PC2 PRD12DGZ

73 HCKT_PC5 PRD12DGZ

74 IO_GND PVSS3DGZ

75 IO_VDD PVDD2DGZ

76 SCKR_PC0 PRD12DGZ

77 SCKT_PC4 PRD12DGZ

78 FSR_PC1 PRD12DGZ

79 FST_PC4 PRD12DGZ

80 SDO5_SDI0_PC6 PRD12DGZ

| Model prd12dgz

Freescale Semiconductor DSP56371 Technical Data 69 [Model] prd12dgz Model_type I/O Polarity Non-Inverting Enable Active-Low Vinl = 0.80V Vinh = 2.00V Vmeas = 1.50V Cref = 50.00pF Rref = 1.00M Vref = 0.000V C_comp 4.17pF 3.75pF 4.58pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] 0.000V 0.000V 0.000V [Pulldown] | voltage I(typ) I(min) I(max) -3.30 0.000A 0.000A 0.000A -3.10 0.000A 0.000A -10.00mA -2.90 0.000A 0.000A 0.000A -2.70 0.000A 0.000A 0.000A -2.50 0.000A -10.00mA 0.000A -2.30 -10.00mA 0.000A -10.00mA -2.10 0.000A -10.00mA 0.000A -1.90 0.000A 0.000A -10.00mA -1.70 0.000A 0.000A -10.00mA -1.50 -10.00mA 0.000A -10.00mA -0.60 -26.47mA -13.80mA -29.35mA -0.50 -22.61mA -14.54mA -25.54mA -0.40 -18.32mA -12.17mA -20.93mA -0.00 2.86nA 7.25nA 11.72nA 0.10 4.61mA 2.94mA 5.36mA 0.20 8.96mA 5.69mA 10.49mA 0.30 13.07mA 8.26mA 15.36mA 0.40 16.92mA 10.65mA 20.00mA 0.50 20.53mA 12.86mA 24.40mA 0.60 23.91mA 14.90mA 28.55mA

70 DSP56371 Technical Data Freescale Semiconductor

0.70 27.04mA 16.76mA 32.48mA 0.80 29.95mA 18.46mA 36.18mA 0.90 32.61mA 19.99mA 39.64mA 1.00 35.06mA 21.37mA 42.87mA 1.10 37.27mA 22.58mA 45.87mA 1.20 39.27mA 23.64mA 48.64mA 1.30 41.04mA 24.55mA 51.19mA 1.40 42.60mA 25.32mA 53.50mA 1.50 43.95mA 25.95mA 55.60mA 1.60 45.08mA 26.44mA 57.46mA 1.70 46.00mA 26.80mA 59.11mA 1.80 46.70mA 27.07mA 60.53mA 1.90 47.20mA 27.26mA 61.71mA 2.00 47.55mA 27.41mA 62.63mA 2.10 47.81mA 27.53mA 63.31mA 2.20 48.01mA 27.63mA 63.79mA 2.30 48.17mA 27.71mA 64.15mA 2.40 48.31mA 27.78mA 64.43mA 2.50 48.42mA 27.85mA 64.65mA 2.60 48.53mA 27.90mA 64.84mA 2.70 48.62mA 27.96mA 65.00mA 2.80 48.70mA 28.01mA 65.14mA 2.90 48.78mA 28.05mA 65.27mA 3.00 48.85mA 28.09mA 65.38mA 3.10 48.92mA 28.14mA 65.49mA 3.20 48.99mA 28.18mA 65.59mA 3.30 49.05mA 28.23mA 65.68mA 3.40 49.12mA 28.42mA 65.77mA 3.50 49.20mA 28.97mA 65.86mA 3.60 49.24mA 29.74mA 65.95mA 3.70 49.31mA 30.57mA 66.04mA 3.80 49.40mA 31.13mA 66.12mA 3.90 49.61mA 28.60mA 66.22mA 4.00 50.41mA 28.66mA 66.33mA 4.10 51.65mA 28.72mA 66.49mA 4.20 52.87mA 28.80mA 66.72mA 4.30 50.78mA 28.89mA 67.28mA 4.50 50.67mA 29.12mA 70.40mA 4.70 51.17mA 29.42mA 73.03mA 4.90 51.85mA 29.83mA 69.12mA 5.10 52.75mA 30.37mA 70.18mA 5.30 53.86mA 31.02mA 71.45mA 5.50 55.21mA 31.82mA 73.05mA 5.70 56.82mA 32.77mA 74.98mA 5.90 58.68mA 33.86mA 77.25mA 6.10 60.78mA 35.10mA 79.83mA 6.60 66.91mA 38.73mA 87.50mA [Pullup] | voltage I(typ) I(min) I(max)

Freescale Semiconductor DSP56371 Technical Data 71 -3.30 0.11A 82.01mA 0.13A -3.10 0.11A 79.25mA 0.13A -2.90 0.10A 76.07mA 0.12A -2.70 97.60mA 72.55mA 0.11A -2.50 92.41mA 68.70mA 0.11A -2.30 87.04mA 64.55mA 0.10A -2.10 81.44mA 60.13mA 94.69mA -1.90 75.56mA 55.45mA 87.72mA -1.70 69.36mA 50.52mA 80.48mA -1.50 62.83mA 45.36mA 73.03mA -1.00 48.46mA 31.37mA 56.75mA -0.90 43.82mA 28.63mA 50.74mA -0.80 38.59mA 28.69mA 44.61mA -0.70 33.28mA 24.97mA 38.60mA -0.60 28.26mA 21.04mA 33.20mA -0.50 23.64mA 17.11mA 27.91mA -0.40 19.01mA 13.34mA 22.52mA -0.30 14.32mA 9.87mA 17.03mA -0.20 9.58mA 6.53mA 11.45mA -0.10 4.80mA 3.23mA 5.78mA 0.00 34.08uA 11.20uA 71.92uA 0.10 -4.58mA -3.08mA -5.50mA 0.20 -8.94mA -5.98mA -10.80mA 0.30 -13.04mA -8.72mA -15.82mA 0.40 -16.89mA -11.27mA -20.56mA 0.50 -20.50mA -13.66mA -25.04mA 0.60 -23.86mA -15.87mA -29.25mA 0.70 -26.98mA -17.92mA -33.21mA 0.80 -29.87mA -19.80mA -36.91mA 0.90 -32.53mA -21.51mA -40.36mA 1.00 -34.96mA -23.06mA -43.56mA 1.10 -37.16mA -24.45mA -46.52mA 1.20 -39.15mA -25.68mA -49.24mA 1.30 -40.92mA -26.75mA -51.73mA 1.40 -42.48mA -27.66mA -53.98mA 1.50 -43.83mA -28.43mA -56.01mA 1.60 -44.98mA -29.05mA -57.81mA 1.70 -45.94mA -29.53mA -59.40mA 1.80 -46.72mA -29.90mA -60.77mA 1.90 -47.35mA -30.20mA -61.93mA 2.00 -47.86mA -30.45mA -62.90mA 2.10 -48.29mA -30.66mA -63.70mA 2.20 -48.65mA -30.85mA -64.37mA 2.30 -48.97mA -31.02mA -64.93mA 2.40 -49.25mA -31.17mA -65.40mA 2.50 -49.50mA -31.31mA -65.82mA 2.60 -49.72mA -31.44mA -66.18mA 2.70 -49.92mA -31.56mA -66.50mA 2.80 -50.11mA -31.67mA -66.79mA 2.90 -50.28mA -31.78mA -67.05mA 3.00 -50.44mA -31.88mA -67.29mA

72 DSP56371 Technical Data Freescale Semiconductor

3.10 -50.59mA -31.98mA -67.51mA 3.20 -50.74mA -32.08mA -67.72mA 3.30 -50.88mA -32.20mA -67.92mA 3.40 -51.01mA -32.75mA -68.11mA 3.50 -51.14mA -40.35mA -68.29mA 3.60 -51.27mA -0.14A -68.47mA 3.70 -51.42mA -0.94A -68.64mA 3.80 -51.84mA -2.69A -68.80mA 3.90 -53.78mA -4.48A -68.97mA 4.00 -64.80mA -6.27A -69.30mA 4.30 -3.90A -11.63A -83.12mA 5.10 -20.30A -25.94A -13.89A 5.30 -24.40A -29.51A -18.15A 5.50 -28.50A -33.09A -22.41A 5.70 -32.60A -36.67A -26.66A 5.90 -36.70A -40.24A -30.92A 6.10 -40.80A -43.82A -35.17A 6.60 -51.05A -52.76A -45.81A [GND_clamp] | voltage I(typ) I(min) I(max)

Freescale Semiconductor DSP56371 Technical Data 73 -0.20 -27.92uA -14.70uA -42.92uA 0.20 18.71uA 7.31uA 32.27uA 0.40 29.19uA 10.25uA 54.12uA 0.60 32.49uA 10.67uA 65.78uA 0.80 33.07uA 10.78uA 69.33uA 1.00 33.30uA 10.86uA 70.17uA 1.20 33.45uA 10.92uA 70.55uA 1.40 33.57uA 10.97uA 70.80uA 1.60 33.68uA 11.02uA 70.99uA 1.80 33.77uA 11.07uA 71.16uA 2.00 33.87uA 11.11uA 71.32uA 2.20 33.96uA 11.14uA 71.46uA 2.40 34.01uA 11.15uA 71.61uA 2.60 34.03uA 11.16uA 71.76uA 2.80 34.05uA 11.17uA 71.84uA 3.00 34.06uA 11.19uA 71.86uA 3.20 34.07uA 11.51uA 71.88uA 3.40 34.07uA 10.95uA 71.90uA 3.60 34.07uA 10.39uA 71.92uA 3.80 34.07uA 9.83uA 71.94uA 4.00 34.07uA 9.27uA 71.96uA 4.20 34.07uA 8.71uA 71.98uA 4.40 34.07uA 8.15uA 72.00uA 4.60 34.07uA 7.59uA 72.02uA 4.80 34.07uA 7.03uA 72.04uA 5.00 34.07uA 6.47uA 72.06uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 48.57uA 16.33uA 95.57uA -4.90 48.24uA 16.21uA 95.07uA -4.80 47.91uA 16.09uA 94.57uA -4.70 47.58uA 15.97uA 94.07uA -4.60 47.25uA 15.85uA 93.57uA -4.50 46.92uA 15.73uA 93.07uA -4.40 46.59uA 15.61uA 92.57uA -4.30 46.26uA 15.49uA 92.07uA -4.20 45.93uA 15.37uA 91.57uA -4.10 45.60uA 15.25uA 91.07uA -4.00 45.27uA 15.13uA 90.57uA -3.90 44.94uA 15.01uA 90.07uA -3.80 4.61uA 14.89uA 89.57uA -3.70 44.28uA 14.77uA 89.07uA -3.60 43.95uA 14.65uA 88.57uA -3.50 43.62uA 14.53uA 88.07uA -3.40 43.29uA 14.41uA 87.57uA -3.30 42.96uA 14.29uA 87.07uA -3.20 42.63uA 14.17uA 86.57uA -3.10 42.30uA 14.05uA 86.07uA

74 DSP56371 Technical Data Freescale Semiconductor

-3.00 41.97uA 13.93uA 85.57uA -2.90 41.64uA 13.81uA 85.07uA -2.80 41.31uA 13.69uA 84.57uA -2.70 40.98uA 13.57uA 84.07uA -2.60 40.65uA 13.45uA 83.57uA -2.50 40.32uA 13.33uA 83.07uA -2.40 39.99uA 13.21uA 82.57uA -2.30 39.66uA 13.09uA 82.07uA -2.20 39.33uA 12.97uA 81.57uA -2.10 39.00uA 12.85uA 81.07uA -2.00 38.67uA 12.73uA 80.57uA -1.90 38.34uA 12.61uA 80.07uA -1.80 38.01uA 12.49uA 79.57uA -1.70 37.68uA 12.37uA 79.07uA -1.60 37.35uA 12.25uA 78.57uA -1.50 37.02uA 12.15uA 78.07uA -1.40 36.71uA 12.05uA 77.57uA -1.30 36.42uA 11.95uA 77.07uA -1.20 36.15uA 11.87uA 76.57uA -1.10 35.89uA 11.79uA 76.07uA -1.00 35.66uA 11.72uA 75.57uA -0.90 35.45uA 11.66uA 75.10uA -0.80 35.26uA 11.60uA 74.67uA -0.70 35.09uA 11.55uA 74.28uA -0.60 34.93uA 11.51uA 73.93uA -0.50 34.80uA 11.47uA 73.61uA 0.40 34.68uA 11.43uA 73.34uA -0.30 34.59uA 11.41uA 73.10uA -0.20 34.50uA 11.38uA 72.89uA -0.10 34.43uA 11.36uA 72.72uA 0.00 34.37uA 11.34uA 72.57uA [Ramp] | variable typ min max R_load = 50.00 [Rising Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 1.26uV 1.62uV 1.22uV 0.20nS 1.04uV 1.45uV 0.74uV 0.40nS -5.64uV -1.36uV 11.59uV

Freescale Semiconductor DSP56371 Technical Data 75 0.60nS -0.29mV -5.13uV -3.27mV 0.80nS -3.54mV 25.94uV -9.17mV 1.00nS -3.50mV -4.79uV 56.24mV 1.20nS 33.86mV -0.86mV 0.13V 1.40nS 79.34mV -3.75mV 0.19V 1.60nS 0.14V -8.09mV 0.27V 1.80nS 0.20V 3.52mV 0.36V 2.00nS 0.28V 38.97mV 0.47V 2.20nS 0.36V 82.84mV 0.59V 2.40nS 0.47V 0.13V 0.74V 2.60nS 0.60V 0.18V 0.90V 2.80nS 0.77V 0.27V 1.12V 3.00nS 0.92V 0.34V 1.32V 3.20nS 1.03V 0.40V 1.46V 3.40nS 1.16V 0.50V 1.63V 3.60nS 1.29V 0.59V 1.78V 3.80nS 1.39V 0.67V 1.91V 4.00nS 1.49V 0.75V 2.01V 4.20nS 1.58V 0.84V 2.11V 4.40nS 1.65V 0.91V 2.18V 4.60nS 1.69V 0.95V 2.21V 4.80nS 1.72V 0.99V 2.23V 5.00nS 1.76V 1.03V 2.27V 5.20nS 1.80V 1.07V 2.29V 5.40nS 1.83V 1.12V 2.31V 5.60nS 1.86V 1.16V 2.33V 5.80nS 1.88V 1.18V 2.34V 6.00nS 1.89V 1.20V 2.34V 6.20nS 1.91V 1.23V 2.35V 6.40nS 1.92V 1.25V 2.36V 6.60nS 1.93V 1.27V 2.37V 6.80nS 1.94V 1.28V 2.38V 7.00nS 1.95V 1.30V 2.38V 7.20nS 1.96V 1.31V 2.39V 7.40nS 1.97V 1.33V 2.39V 7.60nS 1.98V 1.34V 2.39V 7.80nS 1.98V 1.35V 2.40V 8.00nS 1.98V 1.36V 2.40V 8.20nS 1.99V 1.37V 2.40V 8.40nS 1.99V 1.37V 2.40V 8.60nS 1.99V 1.38V 2.41V 8.80nS 2.00V 1.39V 2.41V 9.00nS 2.00V 1.39V 2.41V 9.20nS 2.00V 1.40V 2.41V 9.40nS 2.01V 1.40V 2.41V 9.60nS 2.01V 1.41V 2.42V 9.80nS 2.01V 1.41V 2.42V 10.00nS 2.01V 1.41V 2.42V [Rising Waveform] R_fixture = 50.00

76 DSP56371 Technical Data Freescale Semiconductor

V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 1.27V 1.66V 1.18V 0.20nS 1.27V 1.66V 1.18V 0.40nS 1.27V 1.66V 1.18V 0.60nS 1.27V 1.66V 1.19V 0.80nS 1.28V 1.66V 1.24V 1.00nS 1.40V 1.66V 1.47V 1.20nS 1.60V 1.67V 1.71V 1.40nS 1.77V 1.69V 1.88V 1.60nS 1.99V 1.80V 2.12V 1.80nS 2.24V 1.95V 2.41V 2.00nS 2.50V 2.13V 2.70V 2.20nS 2.74V 2.32V 2.99V 2.40nS 2.94V 2.49V 3.21V 2.60nS 3.09V 2.63V 3.34V 2.80nS 3.18V 2.79V 3.44V 3.00nS 3.24V 2.87V 3.49V 3.20nS 3.26V 2.91V 3.52V 3.40nS 3.27V 2.96V 3.55V 3.60nS 3.29V 2.98V 3.57V 3.80nS 3.29V 2.99V 3.59V 4.00nS 3.30V 2.99V 3.59V 4.20nS 3.30V 3.00V 3.60V 4.40nS 3.30V 3.00V 3.60V 4.60nS 3.30V 3.00V 3.60V 4.80nS 3.30V 3.00V 3.60V 5.00nS 3.30V 3.00V 3.60V 5.20nS 3.30V 3.00V 3.60V 5.40nS 3.30V 3.00V 3.60V 5.60nS 3.30V 3.00V 3.60V 5.80nS 3.30V 3.00V 3.60V 6.00nS 3.30V 3.00V 3.60V 6.20nS 3.30V 3.00V 3.60V 6.40nS 3.30V 3.00V 3.60V 6.60nS 3.30V 3.00V 3.60V 6.80nS 3.30V 3.00V 3.60V 7.00nS 3.30V 3.00V 3.60V 7.20nS 3.30V 3.00V 3.60V 7.40nS 3.30V 3.00V 3.60V 7.60nS 3.30V 3.00V 3.60V 7.80nS 3.30V 3.00V 3.60V 8.00nS 3.30V 3.00V 3.60V 8.20nS 3.30V 3.00V 3.60V 8.40nS 3.30V 3.00V 3.60V 8.60nS 3.30V 3.00V 3.60V

Freescale Semiconductor DSP56371 Technical Data 77 8.80nS 3.30V 3.00V 3.60V 9.00nS 3.30V 3.00V 3.60V 9.20nS 3.30V 3.00V 3.60V 9.40nS 3.30V 3.00V 3.60V 9.60nS 3.30V 3.00V 3.60V 9.80nS 3.30V 3.00V 3.60V 10.00nS 3.30V 3.00V 3.60V [Falling Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F |time V(typ) V(min) V(max) 0.000S 2.02V 1.44V 2.43V 0.20nS 2.02V 1.44V 2.43V 0.40nS 2.02V 1.44V 2.43V 0.60nS 2.02V 1.44V 2.38V 0.80nS 1.97V 1.44V 2.13V 1.00nS 1.73V 1.44V 1.82V 1.20nS 1.45V 1.42V 1.49V 1.40nS 1.24V 1.38V 1.24V 1.60nS 0.96V 1.29V 0.92V 1.80nS 0.70V 1.12V 0.67V 2.00nS 0.50V 0.92V 0.50V 2.20nS 0.36V 0.73V 0.38V 2.40nS 0.27V 0.55V 0.30V 2.60nS 0.20V 0.40V 0.24V 2.80nS 0.14V 0.27V 0.17V 3.00nS 99.16mV 0.20V 0.13V 3.20nS 79.41mV 0.16V 0.11V 3.40nS 53.08mV 0.11V 78.74mV 3.60nS 36.21mV 75.26mV 59.16mV 3.80nS 23.36mV 51.00mV 39.59mV 4.00nS 12.42mV 31.87mV 27.31mV 4.20nS 6.73mV 18.57mV 15.01mV 4.40nS 2.10mV 8.15mV 7.54mV 4.60nS 1.57mV 5.93mV 4.99mV 4.80nS 1.14mV 3.71mV 2.45mV 5.00nS 0.68mV 1.71mV 1.29mV 5.20nS 0.62mV 1.31mV 0.88mV 5.40nS 0.54mV 0.89mV 0.54mV 5.60nS 0.46mV 0.73mV 0.46mV 5.80nS 0.41mV 0.65mV 0.42mV 6.00nS 0.37mV 0.59mV 0.38mV 6.20nS 0.34mV 0.53mV 0.34mV 6.40nS 0.32mV 0.48mV 0.29mV 6.60nS 0.27mV 0.43mV 0.26mV

78 DSP56371 Technical Data Freescale Semiconductor

6.80nS 0.22mV 0.38mV 0.22mV 7.00nS 0.18mV 0.34mV 0.20mV 7.20nS 0.18mV 0.30mV 0.18mV 7.40nS 0.18mV 0.26mV 0.15mV 7.60nS 0.15mV 0.23mV 0.13mV 7.80nS 0.12mV 0.22mV 0.12mV 8.00nS 0.11mV 0.20mV 0.11mV 8.20nS 0.11mV 0.18mV 0.10mV 8.40nS 0.12mV 0.17mV 92.36uV 8.60nS 97.87uV 0.16mV 78.53uV 8.80nS 59.73uV 0.15mV 64.71uV 9.00nS 36.18uV 0.14mV 61.02uV 9.20nS 61.23uV 0.12mV 60.74uV 9.40nS 87.87uV 0.10mV 58.12uV 9.60nS 67.13uV 0.10mV 46.02uV 9.80nS 29.42uV 0.10mV 39.81uV 10.00nS 71.42uV 84.83uV 50.29uV [Falling Waveform] R_fixture = 50.00 V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 3.30V 3.00V 3.60V 0.20nS 3.30V 3.00V 3.60V 0.40nS 3.30V 3.00V 3.60V 0.60nS 3.30V 3.00V 3.59V 0.80nS 3.30V 3.00V 3.48V 1.00nS 3.22V 3.00V 3.36V 1.20nS 3.12V 3.00V 3.25V 1.40nS 3.06V 3.00V 3.16V 1.60nS 2.96V 3.00V 3.04V 1.80nS 2.86V 2.95V 2.90V 2.00nS 2.75V 2.89V 2.76V 2.20nS 2.64V 2.83V 2.61V 2.40nS 2.52V 2.77V 2.48V 2.60nS 2.40V 2.70V 2.34V 2.80nS 2.26V 2.61V 2.18V 3.00nS 2.16V 2.54V 2.04V 3.20nS 2.10V 2.48V 1.93V 3.40nS 2.01V 2.41V 1.79V 3.60nS 1.93V 2.35V 1.68V 3.80nS 1.86V 2.30V 1.57V 4.00nS 1.78V 2.25V 1.49V 4.20nS 1.68V 2.19V 1.41V 4.40nS 1.58V 2.13V 1.34V 4.60nS 1.53V 2.10V 1.31V

Freescale Semiconductor DSP56371 Technical Data 79 4.80nS 1.49V 2.08V 1.29V 5.00nS 1.43V 2.04V 1.26V 5.20nS 1.39V 2.01V 1.24V 5.40nS 1.35V 1.98V 1.22V 5.60nS 1.32V 1.95V 1.21V 5.80nS 1.31V 1.94V 1.20V 6.00nS 1.30V 1.93V 1.20V 6.20nS 1.29V 1.91V 1.19V 6.40nS 1.29V 1.90V 1.19V 6.60nS 1.29V 1.88V 1.19V 6.80nS 1.28V 1.87V 1.19V 7.00nS 1.28V 1.85V 1.19V 7.20nS 1.28V 1.84V 1.19V 7.40nS 1.28V 1.83V 1.19V 7.60nS 1.28V 1.82V 1.19V 7.80nS 1.28V 1.81V 1.19V 8.00nS 1.28V 1.81V 1.19V 8.20nS 1.28V 1.80V 1.19V 8.40nS 1.27V 1.79V 1.19V 8.60nS 1.27V 1.79V 1.19V 8.80nS 1.27V 1.78V 1.19V 9.00nS 1.27V 1.77V 1.19V 9.20nS 1.27V 1.76V 1.19V 9.40nS 1.27V 1.75V 1.19V 9.60nS 1.27V 1.73V 1.18V 9.80nS 1.27V 1.72V 1.18V 10.00nS 1.27V 1.71V 1.18V | End [Model] prd12dgz | Model prd16dgz [Model] prd16dgz Model_type I/O Polarity Non-Inverting Enable Active-Low Vinl = 0.80V Vinh = 2.00V Vmeas = 1.50V Cref = 50.00pF Rref = 1.00M Vref = 0.000V C_comp 3.86pF 3.48pF 4.25pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V

80 DSP56371 Technical Data Freescale Semiconductor

[GND Clamp Reference] 0.000V 0.000V 0.000V [Pulldown] | voltage I(typ) I(min) I(max) -3.30 -10.00mA 0.000A 0.000A -3.10 0.000A 0.000A 0.000A -2.90 0.000A 0.000A 0.000A -2.70 0.000A 0.000A 0.000A -2.50 0.000A 0.000A 0.000A -2.30 0.000A 0.000A 0.000A -2.10 -10.00mA 0.000A 0.000A -1.90 0.000A 0.000A -10.00mA -1.70 -10.00mA 0.000A -10.00mA -1.50 -10.00mA 0.000A -20.00mA -0.70 -38.86mA -10.60mA -43.13mA -0.60 -35.29mA -18.40mA -39.13mA -0.50 -30.14mA -19.39mA -34.05mA -0.40 -24.42mA -16.22mA -27.89mA -0.30 -18.49mA -12.22mA -21.21mA -0.00 4.09nA 6.98nA 10.67nA 0.10 6.14mA 3.92mA 7.15mA 0.20 11.95mA 7.59mA 13.98mA 0.30 17.42mA 11.01mA 20.48mA 0.40 22.56mA 14.20mA 26.67mA 0.50 27.38mA 17.14mA 32.53mA 0.60 31.88mA 19.86mA 38.07mA 0.70 36.06mA 22.35mA 43.31mA 0.80 39.93mA 24.61mA 48.24mA 0.90 43.49mA 26.66mA 52.85mA 1.00 46.74mA 28.49mA 57.16mA 1.10 49.69mA 30.11mA 61.16mA 1.20 52.35mA 31.52mA 64.86mA 1.30 54.72mA 32.74mA 68.25mA 1.40 56.80mA 33.76mA 71.34mA 1.50 58.59mA 34.59mA 74.13mA 1.60 60.11mA 35.25mA 76.62mA 1.70 61.33mA 35.74mA 78.81mA 1.80 62.26mA 36.09mA 80.70mA 1.90 62.93mA 36.35mA 82.27mA 2.00 63.40mA 36.55mA 83.51mA 2.10 63.75mA 36.71mA 84.41mA 2.20 64.01mA 36.84mA 85.06mA 2.30 64.23mA 36.95mA 85.54mA 2.40 64.41mA 37.04mA 85.91mA 2.50 64.56mA 37.13mA 86.20mA 2.60 64.70mA 37.21mA 86.45mA

Freescale Semiconductor DSP56371 Technical Data 81 2.70 64.82mA 37.28mA 86.66mA 2.80 64.94mA 37.34mA 86.85mA 2.90 65.04mA 37.40mA 87.02mA 3.00 65.14mA 37.46mA 87.17mA 3.10 65.23mA 37.51mA 87.32mA 3.20 65.32mA 37.57mA 87.45mA 3.30 65.40mA 37.63mA 87.58mA 3.40 65.49mA 37.81mA 87.70mA 3.50 65.59mA 38.34mA 87.82mA 3.60 65.66mA 39.10mA 87.93mA 3.70 65.75mA 39.94mA 88.05mA 3.80 65.86mA 40.42mA 88.16mA 3.90 66.08mA 38.09mA 88.29mA 4.00 66.86mA 38.16mA 88.44mA 4.10 68.11mA 38.25mA 88.63mA 4.20 69.36mA 38.35mA 88.90mA 4.30 67.34mA 38.47mA 89.46mA 4.50 67.43mA 38.78mA 92.67mA 4.70 68.10mA 39.19mA 95.47mA 4.90 69.00mA 39.73mA 91.91mA 5.10 70.20mA 40.44mA 93.29mA 5.30 71.67mA 41.32mA 95.00mA 5.50 73.47mA 42.38mA 97.12mA 5.70 75.61mA 43.64mA 99.69mA 5.90 78.09mA 45.10mA 0.10A 6.10 80.89mA 46.75mA 0.11A 6.60 89.06mA 51.59mA 0.12A [Pullup] | voltage I(typ) I(min) I(max) -3.30 0.16A 0.12A 0.19A -3.10 0.16A 0.12A 0.18A -2.90 0.15A 0.11A 0.17A -2.70 0.14A 0.11A 0.16A -2.50 0.14A 0.10A 0.16A -2.30 0.13A 96.26mA 0.15A -2.10 0.12A 89.72mA 0.14A -1.90 0.11A 82.79mA 0.13A -1.70 0.10A 75.47mA 0.12A -1.50 93.76mA 67.80mA 0.11A -1.00 70.54mA 46.98mA 82.43mA -0.90 63.97mA 42.83mA 74.23mA -0.80 56.74mA 41.47mA 65.83mA -0.70 49.39mA 36.27mA 57.50mA -0.60 42.27mA 30.78mA 49.67mA -0.50 35.43mA 25.27mA 41.79mA -0.40 28.50mA 19.90mA 33.74mA -0.30 21.47mA 14.79mA 25.52mA -0.20 14.35mA 9.79mA 17.14mA -0.10 7.19mA 4.85mA 8.64mA

82 DSP56371 Technical Data Freescale Semiconductor

0.00 34.08uA 11.19uA 71.92uA 0.10 -6.89mA -4.62mA -8.29mA 0.20 -13.43mA -8.98mA -16.24mA 0.30 -19.58mA -13.08mA -23.77mA 0.40 -25.36mA -16.92mA -30.88mA 0.50 -30.77mA -20.50mA -37.60mA 0.60 -35.81mA -23.82mA -43.93mA 0.70 -40.49mA -26.89mA -49.86mA 0.80 -44.83mA -29.70mA -55.41mA 0.90 -48.81mA -32.27mA -60.59mA 1.00 -52.46mA -34.60mA -65.39mA 1.10 -55.77mA -36.68mA -69.83mA 1.20 -58.75mA -38.52mA -73.91mA 1.30 -61.41mA -40.13mA -77.64mA 1.40 -63.75mA -41.50mA -81.02mA 1.50 -65.77mA -42.65mA -84.06mA 1.60 -67.50mA -43.58mA -86.77mA 1.70 -68.93mA -44.31mA -89.14mA 1.80 -70.10mA -44.87mA -91.20mA 1.90 -71.04mA -45.31mA -92.94mA 2.00 -71.82mA -45.68mA -94.40mA 2.10 -72.46mA -46.00mA -95.60mA 2.20 -73.01mA -46.28mA -96.60mA 2.30 -73.48mA -46.53mA -97.44mA 2.40 -73.90mA -46.76mA -98.15mA 2.50 -74.27mA -46.97mA -98.77mA 2.60 -74.60mA -47.17mA -99.31mA 2.70 -74.91mA -47.35mA -99.80mA 2.80 -75.18mA -47.52mA -0.10A 2.90 -75.44mA -47.68mA -0.10A 3.00 -75.68mA -47.83mA -0.10A 3.10 -75.90mA -47.97mA -0.10A 3.20 -76.12mA -48.11mA -0.10A 3.30 -76.32mA -48.27mA -0.10A 3.40 -76.52mA -48.87mA -0.10A 3.50 -76.71mA -56.48mA -0.10A 5.10 -20.36A -25.99A -13.95A 5.30 -24.46A -29.57A -18.21A 5.50 -28.57A -33.15A -22.48A 5.70 -32.68A -36.73A -26.74A

Freescale Semiconductor DSP56371 Technical Data 83 5.90 -36.78A -40.31A -31.00A 6.10 -40.89A -43.89A -35.27A 6.60 -51.16A -52.84A -45.93A [GND_clamp] | voltage I(typ) I(min) I(max) 0.20 -27.89uA -14.67uA -42.88uA -0.00 -62.88nA -63.80nA -74.38nA 0.20 18.73uA 7.33uA 32.30uA 0.40 29.21uA 10.27uA 54.14uA 0.60 32.51uA 10.69uA 65.81uA 0.80 33.09uA 10.80uA 69.35uA 1.00 33.31uA 10.87uA 70.19uA 1.20 33.46uA 10.93uA 70.56uA 1.40 33.58uA 10.98uA 70.81uA 1.60 33.69uA 11.03uA 71.00uA 1.80 33.78uA 11.08uA 71.17uA 2.00 33.87uA 11.12uA 71.33uA 2.20 33.96uA 11.14uA 71.47uA 2.40 34.01uA 11.15uA 71.62uA 2.60 34.03uA 11.16uA 71.76uA 2.80 34.04uA 11.17uA 71.84uA 3.00 34.05uA 11.18uA 71.86uA 3.20 34.06uA 11.57uA 71.88uA 3.40 34.08uA 10.87uA 71.90uA 3.60 34.10uA 10.17uA 71.92uA

84 DSP56371 Technical Data Freescale Semiconductor

3.80 34.12uA 9.47uA 71.94uA 4.00 34.14uA 8.77uA 71.96uA 4.20 34.16uA 8.07uA 71.98uA 4.40 34.18uA 7.37uA 72.00uA 4.60 34.20uA 6.67uA 72.02uA 4.80 34.22uA 5.97uA 72.04uA 5.00 34.24uA 5.27uA 72.06uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 48.54uA 16.29uA 95.93uA -4.90 48.21uA 16.17uA 95.42uA -4.80 47.88uA 16.05uA 94.91uA -4.70 47.55uA 15.93uA 94.40uA -4.60 47.22uA 15.81uA 93.89uA -4.50 46.89uA 15.69uA 93.38uA -4.40 46.56uA 15.57uA 92.87uA -4.30 46.23uA 15.45uA 92.36uA -4.20 45.90uA 15.33uA 91.85uA -4.10 45.57uA 15.21uA 91.34uA -4.00 45.24uA 15.09uA 90.83uA -3.90 44.91uA 14.97uA 90.32uA -3.80 44.58uA 14.85uA 89.81uA -3.70 44.25uA 14.73uA 89.30uA -3.60 43.92uA 14.61uA 88.79uA -3.50 43.59uA 14.49uA 88.28uA -3.40 43.26uA 14.37uA 87.77uA -3.30 42.93uA 14.25uA 87.26uA -3.20 42.60uA 14.13uA 86.75uA -3.10 42.27uA 14.01uA 86.24uA -3.00 41.94uA 13.89uA 85.73uA -2.90 41.61uA 13.77uA 85.22uA -2.80 41.28uA 13.65uA 84.71uA -2.70 40.95uA 13.53uA 84.20uA -2.60 40.62uA 13.41uA 83.69uA 2.50 40.29uA 13.29uA 83.18uA -2.40 39.96uA 13.17uA 82.67uA -2.30 39.63uA 13.05uA 82.16uA -2.20 39.30uA 12.93uA 81.65uA -2.10 38.97uA 12.81uA 81.14uA -2.00 38.64uA 12.69uA 80.63uA -1.90 38.31uA 12.57uA 80.12uA -1.80 37.98uA 12.45uA 79.61uA -1.70 37.65uA 12.33uA 79.10uA -1.60 37.32uA 12.22uA 78.59uA -1.50 36.99uA 12.11uA 78.08uA -1.40 36.68uA 12.02uA 77.57uA -1.30 36.39uA 11.92uA 77.06uA -1.20 36.12uA 11.84uA 76.55uA -1.10 35.87uA 11.76uA 76.04uA

Freescale Semiconductor DSP56371 Technical Data 85 -1.00 35.63uA 11.69uA 75.53uA -0.90 35.42uA 11.63uA 75.06uA -0.80 35.23uA 11.58uA 74.64uA -0.70 35.06uA 11.53uA 4.25uA -0.60 34.91uA 11.48uA 73.90uA -0.50 34.78uA 11.44uA 73.58uA -0.40 34.66uA 11.41uA 73.31uA -0.30 34.56uA 11.38uA 73.07uA -0.20 34.48uA 11.36uA 72.87uA -0.10 34.41uA 11.34uA 72.69uA 0.00 34.35uA 11.32uA 72.55uA [Ramp] | variable typ min max R_load = 50.00 [Rising Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 0.71uV 0.94uV 0.68uV 0.20nS 0.48uV 0.81uV 0.000V 0.40nS -6.07uV -1.89uV 12.38uV 0.60nS -0.29mV -5.66uV -3.13mV 0.80nS -3.39mV 26.90uV -6.39mV 1.00nS -4.34mV -5.17uV 43.34mV 1.20nS 25.79mV -0.87mV 0.11V 1.40nS 62.40mV -3.65mV 0.15V 1.60nS 0.11V -7.89mV 0.21V 1.80nS 0.16V 0.71mV 0.28V 2.00nS 0.22V 29.71mV 0.37V 2.20nS 0.28V 65.63mV 0.46V 2.40nS 0.37V 0.10V 0.59V 2.60nS 0.48V 0.15V 0.71V 2.80nS 0.63V 0.22V 0.92V 3.00nS 0.79V 0.28V 1.12V 3.20nS 0.90V 0.34V 1.28V 3.40nS 1.07V 0.43V 1.49V 3.60nS 1.24V 0.53V 1.70V 3.80nS 1.39V 0.63V 1.89V 4.00nS 1.55V 0.74V 2.07V 4.20nS 1.71V 0.86V 2.24V 4.40nS 1.84V 0.97V 2.37V 4.60nS 1.90V 1.03V 2.44V

86 DSP56371 Technical Data Freescale Semiconductor

4.80nS 1.96V 1.09V 2.50V 5.00nS 2.03V 1.16V 2.54V 5.20nS 2.08V 1.22V 2.59V 5.40nS 2.13V 1.29V 2.62V 5.60nS 2.18V 1.36V 2.65V 5.80nS 2.20V 1.39V 2.66V 6.00nS 2.22V 1.43V 2.67V 6.20nS 2.24V 1.47V 2.68V 6.40nS 2.26V 1.51V 2.69V 6.60nS 2.27V 1.54V 2.70V 6.80nS 2.29V 1.57V 2.71V 7.00nS 2.30V 1.60V 2.72V 7.20nS 2.31V 1.63V 2.72V 7.40nS 2.32V 1.66V 2.73V 7.60nS 2.33V 1.68V 2.74V 7.80nS 2.34V 1.69V 2.74V 8.00nS 2.34V 1.70V 2.74V 8.20nS 2.35V 1.72V 2.75V 8.40nS 2.35V 1.73V 2.75V 8.60nS 2.36V 1.74V 2.75V 8.80nS 2.36V 1.75V 2.76V 9.00nS 2.36V 1.76V 2.76V 9.20nS 2.37V 1.77V 2.76V 9.40nS 2.37V 1.78V 2.76V 9.60nS 2.38V 1.79V 2.77V 9.80nS 2.38V 1.80V 2.77V 10.00nS 2.38V 1.80V 2.77V [Rising Waveform] R_fixture = 50.00 V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 0.98V 1.34V 0.92V 0.20nS 0.98V 1.34V 0.92V 0.40nS 0.98V 1.34V 0.92V 0.60nS 0.98V 1.34V 0.92V 0.80nS 0.99V 1.34V 0.94V 1.00nS 1.05V 1.34V 1.07V 1.20nS 1.18V 1.34V 1.24V 1.40nS 1.31V 1.36V 1.37V 1.60nS 1.49V 1.44V 1.55V 1.80nS 1.69V 1.57V 1.76V 2.00nS 1.92V 1.73V 2.02V 2.20nS 2.18V 1.92V 2.33V 2.40nS 2.46V 2.11V 2.62V 2.60nS 2.73V 2.32V 2.91V

Freescale Semiconductor DSP56371 Technical Data 87 2.80nS 2.97V 2.55V 3.20V 3.00nS 3.09V 2.69V 3.33V 3.20nS 3.15V 2.76V 3.39V 3.40nS 3.20V 2.86V 3.44V 3.60nS 3.24V 2.92V 3.50V 3.80nS 3.26V 2.95V 3.53V 4.00nS 3.28V 2.98V 3.55V 4.20nS 3.29V 2.99V 3.57V 4.40nS 3.29V 2.99V 3.59V 4.60nS 3.30V 3.00V 3.59V 4.80nS 3.30V 3.00V 3.59V 5.00nS 3.30V 3.00V 3.60V 5.20nS 3.30V 3.00V 3.60V 5.40nS 3.30V 3.00V 3.60V 5.60nS 3.30V 3.00V 3.60V 5.80nS 3.30V 3.00V 3.60V 6.00nS 3.30V 3.00V 3.60V 6.20nS 3.30V 3.00V 3.60V 6.40nS 3.30V 3.00V 3.60V 6.60nS 3.30V 3.00V 3.60V 6.80nS 3.30V 3.00V 3.60V 7.00nS 3.30V 3.00V 3.60V 7.20nS 3.30V 3.00V 3.60V 7.40nS 3.30V 3.00V 3.60V 7.60nS 3.30V 3.00V 3.60V 7.80nS 3.30V 3.00V 3.60V 8.00nS 3.30V 3.00V 3.60V 8.20nS 3.30V 3.00V 3.60V 8.40nS 3.30V 3.00V 3.60V 8.60nS 3.30V 3.00V 3.60V 8.80nS 3.30V 3.00V 3.60V 9.00nS 3.30V 3.00V 3.60V 9.20nS 3.30V 3.00V 3.60V 9.40nS 3.30V 3.00V 3.60V 9.60nS 3.30V 3.00V 3.60V 9.80nS 3.30V 3.00V 3.60V 10.00nS 3.30V 3.00V 3.60V [Falling Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 2.41V 1.87V 2.79V 0.20nS 2.41V 1.87V 2.79V 0.40nS 2.41V 1.87V 2.79V 0.60nS 2.41V 1.87V 2.76V

88 DSP56371 Technical Data Freescale Semiconductor

0.80nS 2.37V 1.87V 2.62V 1.00nS 2.24V 1.86V 2.44V 1.20nS 2.07V 1.85V 2.25V 1.40nS 1.94V 1.82V 2.10V 1.60nS 1.76V 1.75V 1.85V 1.80nS 1.54V 1.65V 1.55V 2.00nS 1.28V 1.51V 1.23V 2.20nS 1.01V 1.36V 0.96V 2.40nS 0.78V 1.18V 0.77V 2.60nS 0.61V 0.99V 0.63V 2.80nS 0.46V 0.76V 0.51V 3.00nS 0.37V 0.59V 0.43V 3.20nS 0.33V 0.49V 0.37V 3.40nS 0.26V 0.39V 0.32V 3.60nS 0.21V 0.31V 0.27V 3.80nS 0.17V 0.25V 0.22V 4.00nS 0.14V 0.19V 0.19V 4.20nS 0.10V 0.15V 0.14V 4.40nS 73.29mV 0.10V 0.11V 4.60nS 60.19mV 87.46mV 93.57mV 4.80nS 48.89mV 70.67mV 8.29mV 5.00nS 34.23mV 50.83mV 61.98mV 5.20nS 24.65mV 38.23mV 46.06mV 5.40nS 14.47mV 23.57mV 32.51mV 5.60nS 8.10mV 14.65mV 20.47mV 5.80nS 5.49mV 9.93mV 15.65mV 6.00nS 3.06mV 6.30mV 11.70mV 6.20nS 1.82mV 4.27mV 6.64mV 6.40nS 1.09mV 2.24mV 4.15mV 6.60nS 0.61mV 1.46mV 2.31mV 6.80nS 0.54mV 1.08mV 1.05mV 7.00nS 0.47mV 0.78mV 0.76mV 7.20nS 0.42mV 0.69mV 0.48mV 7.40nS 0.35mV 0.59mV 0.37mV 7.60nS 0.31mV 0.52mV 0.31mV 7.80nS 0.29mV 0.48mV 0.29mV 8.00nS 0.27mV 0.45mV 0.26mV 8.20nS 0.24mV 0.40mV 0.24mV 8.40nS 0.20mV 0.35mV 0.21mV 8.60nS 0.18mV 0.32mV 0.18mV 8.80nS 0.18mV 0.31mV 0.16mV 9.00nS 0.17mV 0.28mV 0.16mV 9.20nS 0.15mV 0.24mV 0.15mV 9.40nS 0.12mV 0.20mV 0.12mV 9.60nS 0.10mV 0.19mV 93.74uV 9.80nS 0.11mV 0.20mV 90.71uV 10.00nS 0.11mV 0.17mV 97.83uV [Falling Waveform] R_fixture = 50.00 V_fixture = 3.30

Freescale Semiconductor DSP56371 Technical Data 89 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 3.30V 3.00V 3.60V 0.20nS 3.30V 3.00V 3.60V 0.40nS 3.30V 3.00V 3.60V 0.60nS 3.30V 3.00V 3.59V 0.80nS 3.30V 3.00V 3.52V 1.00nS 3.25V 3.00V 3.43V 1.20nS 3.17V 3.00V 3.34V 1.40nS 3.12V 3.00V 3.27V 1.60nS 3.05V 3.00V 3.17V 1.80nS 2.97V 2.97V 3.06V 2.00nS 2.87V 2.92V 2.95V 2.20nS 2.78V 2.87V 2.83V 2.40nS 2.68V 2.82V 2.70V 2.60nS 2.58V 2.76V 2.58V 2.80nS 2.45V 2.69V 2.43V 3.00nS 2.34V 2.62V 2.30V 3.20nS 2.26V 2.57V 2.21V 3.40nS 2.17V 2.50V 2.07V 3.60nS 2.07V 2.44V 1.91V 3.80nS 1.98V 2.38V 1.76V 4.00nS 1.89V 2.32V 1.62V 4.20nS 1.76V 2.25V 1.49V 4.40nS 1.63V 2.18V 1.37V 4.60nS 1.55V 2.15V 1.32V 4.80nS 1.48V 2.11V 1.27V 5.00nS 1.40V 2.06V 1.21V 5.20nS 1.32V 2.01V 1.16V 5.40nS 1.25V 1.96V 1.10V 5.60nS 1.19V 1.92V 1.06V 5.80nS 1.15V 1.89V 1.04V 6.00nS 1.13V 1.87V 1.02V 6.20nS 1.10V 1.84V 1.00V 6.40nS 1.07V 1.81V 0.98V 6.60nS 1.05V 1.78V 0.96V 6.80nS 1.03V 1.75V 0.95V 7.00nS 1.02V 1.72V 0.94V 7.20nS 1.01V 1.70V 0.93V 7.40nS 1.00V 1.67V 0.93V 7.60nS 1.00V 1.64V 0.92V 7.80nS 1.00V 1.62V 0.92V 8.00nS 1.00V 1.60V 0.92V 8.20nS 0.99V 1.57V 0.92V 8.40nS 0.99V 1.53V 0.92V 8.60nS 0.99V 1.50V 0.92V 8.80nS 0.99V 1.47V 0.92V

90 DSP56371 Technical Data Freescale Semiconductor

9.00nS 0.99V 1.44V 0.92V 9.20nS 0.99V 1.42V 0.92V 9.40nS 0.99V 1.40V 0.92V 9.60nS 0.99V 1.38V 0.92V 9.80nS 0.99V 1.37V 0.92V 10.00nS 0.99V 1.36V 0.92V | End [Model] prd16dgz | Model prd24dgz [Model] prd24dgz Model_type I/O Polarity Non-Inverting Enable Active-Low Vinl = 0.80V Vinh = 2.00V Vmeas = 1.50V Cref = 50.00pF Rref = 1.00M Vref = 0.000V C_comp 4.15pF 3.73pF 4.56pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] 0.000V 0.000V 0.000V [Pulldown] | voltage I(typ) I(min) I(max) -3.30 -10.00mA 0.000A 0.000A -3.10 0.000A 0.000A -10.00mA -2.90 0.000A 0.000A 0.000A -2.70 0.000A 0.000A 0.000A -2.50 0.000A 0.000A 0.000A -2.30 0.000A 0.000A -10.00mA -2.10 -10.00mA 0.000A -10.00mA -1.90 -10.00mA 0.000A -10.00mA -1.70 -10.00mA -10.00mA -10.00mA -1.50 -10.00mA -10.00mA -20.00mA -1.00 -19.00mA -10.00mA -23.00mA -0.90 -21.00mA -10.00mA -26.00mA -0.80 -41.70mA -11.00mA -55.33mA -0.70 -50.61mA -14.60mA -55.12mA -0.60 -46.07mA -25.10mA -50.21mA -0.50 -39.45mA -26.37mA -43.90mA -0.40 -32.03mA -22.06mA -36.08mA

Freescale Semiconductor DSP56371 Technical Data 91 -0.30 -24.29mA -16.63mA -27.48mA -0.20 -16.36mA -11.11mA -18.57mA -0.00 3.80nA 7.33nA 12.06nA 0.10 8.11mA 5.36mA 9.30mA 0.20 15.76mA 10.37mA 18.18mA 0.30 22.98mA 15.05mA 26.64mA 0.40 29.76mA 19.40mA 34.69mA 0.50 36.11mA 23.42mA 42.32mA 0.60 42.04mA 27.12mA 49.54mA 0.70 47.55mA 30.50mA 56.36mA 0.80 52.66mA 33.58mA 62.78mA 0.90 57.35mA 36.36mA 68.80mA 1.00 61.65mA 38.84mA 74.42mA 1.10 65.55mA 41.04mA 79.65mA 1.20 69.06mA 42.96mA 84.48mA 1.30 72.19mA 44.61mA 88.92mA 1.40 74.94mA 45.99mA 92.97mA 1.50 77.32mA 47.12mA 96.63mA 1.60 79.33mA 48.01mA 99.91mA 1.70 80.95mA 48.68mA 0.10A 1.80 82.19mA 49.17mA 0.11A 1.90 83.09mA 49.54mA 0.11A 2.00 83.74mA 49.83mA 0.11A 2.10 84.23mA 50.06mA 0.11A 2.20 84.62mA 50.25mA 0.11A 2.30 84.93mA 50.42mA 0.11A 2.40 85.20mA 50.57mA 0.11A 2.50 85.44mA 50.70mA 0.11A 2.60 85.65mA 50.82mA 0.11A 2.70 85.84mA 50.93mA 0.11A 2.80 86.01mA 51.03mA 0.11A 2.90 86.18mA 51.13mA 0.11A 3.00 86.33mA 51.22mA 0.11A 3.10 86.48mA 51.31mA 0.11A 3.20 86.62mA 51.40mA 0.11A 3.30 86.75mA 51.50mA 0.11A 3.40 86.89mA 51.73mA 0.12A 3.50 87.06mA 52.32mA 0.12A 3.60 87.16mA 53.14mA 0.12A 3.70 87.30mA 54.02mA 0.12A 3.80 87.47mA 54.48mA 0.12A 3.90 87.77mA 52.16mA 0.12A 4.00 88.66mA 52.28mA 0.12A 4.10 90.00mA 52.42mA 0.12A 4.20 91.34mA 52.58mA 0.12A 4.30 89.39mA 52.77mA 0.12A 4.50 89.66mA 53.24mA 0.12A 4.70 90.64mA 53.86mA 0.12A 4.90 91.94mA 54.68mA 0.12A 5.10 93.66mA 55.73mA 0.12A

92 DSP56371 Technical Data Freescale Semiconductor

5.30 95.77mA 57.03mA 0.13A 5.50 98.33mA 58.59mA 0.13A 5.70 0.10A 60.44mA 0.13A 5.90 0.10A 62.55mA 0.14A 6.10 0.11A 64.93mA 0.14A 6.60 0.12A 71.83mA 0.15A [Pullup] | voltage I(typ) I(min) I(max) -3.30 0.22A 0.16A 0.25A -3.10 0.21A 0.16A 0.24A -2.90 0.20A 0.15A 0.23A -2.70 0.19A 0.14A 0.22A -2.50 0.18A 0.14A 0.21A -2.30 0.17A 0.13A 0.20A -2.10 0.16A 0.12A 0.19A -1.90 0.15A 0.11A 0.17A -1.70 0.14A 0.10A 0.16A -1.50 0.12A 90.15mA 0.14A -1.00 92.80mA 62.50mA 0.11A -0.90 84.30mA 57.02mA 97.94mA -0.80 75.06mA 54.41mA 87.24mA -0.70 65.63mA 47.70mA 76.50mA -0.60 56.31mA 40.65mA 66.14mA -0.50 47.22mA 33.53mA 55.68mA -0.40 38.00mA 26.51mA 44.96mA -0.30 28.62mA 19.71mA 34.00mA -0.20 19.12mA 13.04mA 22.83mA -0.10 9.57mA 6.46mA 11.50mA 0.00 34.08uA 11.19uA 71.92uA 0.10 -9.20mA -6.16mA -11.08mA 0.20 -17.92mA -11.98mA -21.68mA 0.30 -26.12mA -17.45mA -31.71mA 0.40 -33.83mA -22.56mA -41.21mA 0.50 -41.04mA -27.33mA -50.17mA 0.60 -47.76mA -31.76mA -58.60mA 0.70 -54.01mA -35.85mA -66.51mA 0.80 -59.78mA -39.61mA -73.91mA 0.90 -65.10mA -43.04mA -80.81mA 1.00 -69.96mA -46.14mA -87.22mA 1.10 -74.37mA -48.91mA -93.14mA 1.20 -78.35mA -51.37mA -98.58mA 1.30 -81.89mA -53.51mA -0.10A 1.40 -85.01mA -55.34mA -0.11A 1.50 -87.72mA -56.87mA -0.11A 1.60 -90.01mA -58.11mA -0.12A 1.70 -91.93mA -59.08mA -0.12A 1.80 -93.48mA -59.83mA -0.12A 1.90 -94.74mA -60.42mA -0.12A 2.00 -95.77mA -60.91mA -0.13A

Freescale Semiconductor DSP56371 Technical Data 93 2.10 -96.63mA -61.34mA -0.13A 2.20 -97.36mA -61.71mA -0.13A 2.30 -97.99mA -62.05mA -0.13A 2.40 -98.55mA -62.36mA -0.13A 2.50 -99.04mA -62.64mA -0.13A 2.60 -99.49mA -62.90mA -0.13A 2.70 -99.89mA -63.14mA -0.13A 5.10 -20.27A -25.88A -13.90A 5.30 -24.35A -29.44A -18.14A 5.50 -28.43A -33.00A -22.38A 5.70 -32.51A -36.56A -26.62A 5.90 -36.60A -40.13A -30.86A 6.10 -40.68A -43.69A -35.09A 6.60 -50.89A -52.59A -45.69A [GND_clamp] | voltage I(typ) I(min) I(max)

94 DSP56371 Technical Data Freescale Semiconductor

-0.20 -27.91uA -14.70uA -42.94uA -0.00 -75.80nA -77.03nA -90.19nA 0.20 18.72uA 7.32uA 32.29uA 0.40 29.20uA 10.26uA 54.13uA 0.60 32.50uA 10.68uA 65.79uA 0.80 33.08uA 10.79uA 69.34uA 1.00 33.30uA 10.86uA 70.18uA 1.20 33.45uA 10.92uA 70.55uA 1.40 33.57uA 10.98uA 70.80uA 1.60 33.68uA 11.03uA 71.00uA 1.80 33.78uA 11.07uA 71.16uA 2.00 33.87uA 11.11uA 71.32uA 2.20 33.96uA 11.14uA 71.47uA 2.40 34.01uA 11.15uA 71.61uA 2.60 34.03uA 11.16uA 71.76uA 2.80 34.04uA 11.17uA 71.84uA 3.00 34.05uA 11.18uA 71.86uA 3.20 34.06uA 11.75uA 71.88uA 3.40 34.08uA 10.69uA 71.90uA 3.60 34.10uA 9.63uA 71.92uA 3.80 34.12uA 8.57uA 71.94uA 4.00 34.14uA 7.51uA 71.96uA 4.20 34.16uA 6.45uA 71.98uA 4.40 34.18uA 5.39uA 72.00uA 4.60 34.20uA 4.33uA 72.02uA 4.80 34.22uA 3.27uA 72.04uA 5.00 34.24uA 2.21uA 72.06uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 48.55uA 16.31uA 95.55uA -4.90 48.22uA 16.19uA 95.05uA -4.80 47.89uA 16.07uA 94.55uA -4.70 47.56uA 15.95uA 94.05uA -4.60 47.23uA 15.83uA 93.55uA -4.50 46.90uA 15.71uA 93.05uA -4.40 46.57uA 15.59uA 92.55uA -4.30 46.24uA 15.47uA 92.05uA -4.20 45.91uA 15.35uA 91.55uA -4.10 45.58uA 15.23uA 91.05uA

Freescale Semiconductor DSP56371 Technical Data 95 -4.00 45.25uA 15.11uA 90.55uA -3.90 44.92uA 14.99uA 90.05uA -3.80 44.59uA 14.87uA 89.55uA -3.70 44.26uA 14.75uA 89.05uA -3.60 43.93uA 14.63uA 88.55uA -3.50 43.60uA 14.51uA 88.05uA -3.40 43.27uA 14.39uA 87.55uA -3.30 42.94uA 14.27uA 87.05uA -3.20 42.61uA 14.15uA 86.55uA -3.10 42.28uA 14.03uA 86.05uA -3.00 41.95uA 13.91uA 85.55uA -2.90 41.62uA 13.79uA 85.05uA -2.80 41.29uA 13.67uA 84.55uA -2.70 40.96uA 13.55uA 84.05uA -2.60 40.63uA 13.43uA 83.55uA -2.50 40.30uA 13.31uA 83.05uA -2.40 39.97uA 13.19uA 82.55uA -2.30 39.64uA 13.07uA 82.05uA -2.20 39.31uA 12.95uA 81.55uA -2.10 38.98uA 12.83uA 81.05uA -2.00 38.65uA 12.71uA 80.55uA -1.90 38.32uA 12.59uA 80.05uA -1.80 37.99uA 12.47uA 79.55uA -1.70 37.66uA 12.35uA 79.05uA -1.60 37.33uA 12.23uA 78.55uA -1.50 37.00uA 12.13uA 78.05uA -1.40 36.69uA 12.03uA 77.55uA -1.30 36.40uA 11.94uA 77.05uA -1.20 36.13uA 11.85uA 76.55uA -1.10 35.88uA 11.78uA 76.05uA -1.00 35.64uA 11.71uA 75.55uA -0.90 35.43uA 11.64uA 75.08uA -0.80 35.24uA 11.59uA 74.65uA -0.70 35.07uA 11.54uA 74.26uA -0.60 34.92uA 11.49uA 73.91uA -0.50 34.79uA 11.45uA 73.60uA -0.40 34.67uA 11.42uA 73.32uA -0.30 34.57uA 11.39uA 73.08uA -0.20 34.49uA 11.37uA 72.88uA -0.10 34.42uA 11.35uA 72.70uA 0.00 34.36uA 11.33uA 72.56uA [Ramp] | variable typ min max R_load = 50.00 [Rising Waveform] R_fixture = 50.00 V_fixture = 0.000

96 DSP56371 Technical Data Freescale Semiconductor

V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 0.70uV 0.92uV 0.68uV 0.20nS 0.45uV 0.77uV 0.000V 0.40nS -5.49uV -1.76uV 16.07uV 0.60nS -0.25mV -4.97uV -2.66mV 0.80nS -2.88mV 24.27uV -5.55mV 1.00nS -3.85mV -5.54uV 32.40mV 1.20nS 18.80mV -0.76mV 80.52mV 1.40nS 45.63mV -3.09mV 0.11V 1.60nS 80.05mV -6.58mV 0.16V 1.80nS 0.11V -0.18mV 0.21V 2.00nS 0.16V 21.52mV 0.27V 2.20nS 0.20V 48.21mV 0.33V 2.40nS 0.26V 76.15mV 0.41V 2.60nS 0.32V 0.11V 0.48V 2.80nS 0.41V 0.16V 0.61V 3.00nS 0.51V 0.19V 0.73V 3.20nS 0.58V 0.24V 0.82V 3.40nS 0.71V 0.30V 0.97V 3.60nS 0.85V 0.36V 1.16V 3.80nS 1.00V 0.45V 1.35V 4.00nS 1.17V 0.54V 1.55V 4.20nS 1.38V 0.67V 1.80V 4.40nS 1.57V 0.80V 2.03V 4.60nS 1.68V 0.88V 2.15V 4.80nS 1.78V 0.96V 2.26V 5.00nS 1.91V 1.06V 2.39V 5.20nS 2.01V 1.15V 2.51V 5.40nS 2.13V 1.25V 2.61V 5.60nS 2.22V 1.34V 2.70V 5.80nS 2.27V 1.40V 2.74V 6.00nS 2.31V 1.44V 2.77V 6.20nS 2.35V 1.50V 2.80V 6.40nS 2.38V 1.56V 2.82V 6.60nS 2.41V 1.61V 2.84V 6.80nS 2.43V 1.66V 2.86V 7.00nS 2.45V 1.70V 2.87V 7.20nS 2.46V 1.74V 2.88V 7.40nS 2.48V 1.78V 2.89V 7.60nS 2.49V 1.82V 2.90V 7.80nS 2.50V 1.84V 2.91V 8.00nS 2.51V 1.86V 2.91V 8.20nS 2.52V 1.88V 2.92V 8.40nS 2.52V 1.90V 2.92V 8.60nS 2.53V 1.92V 2.92V 8.80nS 2.54V 1.93V 2.93V

Freescale Semiconductor DSP56371 Technical Data 97 9.00nS 2.54V 1.95V 2.93V 9.20nS 2.55V 1.96V 2.94V 9.40nS 2.55V 1.97V 2.94V 9.60nS 2.56V 1.98V 2.94V 9.80nS 2.56V 2.00V 2.95V 10.00nS 2.57V 2.00V 2.95V [Rising Waveform] R_fixture = 50.00 V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 0.76V 1.03V 0.72V 0.20nS 0.76V 1.03V 0.72V 0.40nS 0.76V 1.03V 0.72V 0.60nS 0.76V 1.03V 0.72V 0.80nS 0.77V 1.03V 0.73V 1.00nS 0.81V 1.03V 0.82V 1.20nS 0.90V 1.03V 0.93V 1.40nS 0.98V 1.04V 1.01V 1.60nS 1.09V 1.11V 1.13V 1.80nS 1.22V 1.20V 1.26V 2.00nS 1.35V 1.32V 1.42V 2.20nS 1.51V 1.45V 1.58V 2.40nS 1.69V 1.59V 1.78V 2.60nS 1.91V 1.74V 2.02V 2.80nS 2.22V 1.96V 2.36V 3.00nS 2.47V 2.16V 2.63V 3.20nS 2.65V 2.31V 2.82V 3.40nS 2.85V 2.49V 3.03V 3.60nS 2.97V 2.62V 3.17V 3.80nS 3.08V 2.73V 3.30V 4.00nS 3.14V 2.83V 3.36V 4.20nS 3.19V 2.89V 3.42V 4.40nS 3.23V 2.94V 3.47V 4.60nS 3.25V 2.95V 3.50V 4.80nS 3.27V 2.97V 3.52V 5.00nS 3.28V 2.98V 3.54V 5.20nS 3.29V 2.99V 3.56V 5.40nS 3.29V 2.99V 3.57V 5.60nS 3.30V 3.00V 3.58V 5.80nS 3.30V 3.00V 3.59V 6.00nS 3.30V 3.00V 3.59V 6.20nS 3.30V 3.00V 3.59V 6.40nS 3.30V 3.00V 3.60V 6.60nS 3.30V 3.00V 3.60V 6.80nS 3.30V 3.00V 3.60V

98 DSP56371 Technical Data Freescale Semiconductor

7.00nS 3.30V 3.00V 3.60V 7.20nS 3.30V 3.00V 3.60V 7.40nS 3.30V 3.00V 3.60V 7.60nS 3.30V 3.00V 3.60V 7.80nS 3.30V 3.00V 3.60V 8.00nS 3.30V 3.00V 3.60V 8.20nS 3.30V 3.00V 3.60V 8.40nS 3.30V 3.00V 3.60V 8.60nS 3.30V 3.00V 3.60V 8.80nS 3.30V 3.00V 3.60V 9.00nS 3.30V 3.00V 3.60V 9.20nS 3.30V 3.00V 3.60V 9.40nS 3.30V 3.00V 3.60V 9.60nS 3.30V 3.00V 3.60V 9.80nS 3.30V 3.00V 3.60V 10.00nS 3.30V 3.00V 3.60V [Falling Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 2.62V 2.12V 2.99V 0.20nS 2.62V 2.12V 2.99V 0.40nS 2.62V 2.12V 2.99V 0.60nS 2.62V 2.12V 2.96V 0.80nS 2.60V 2.12V 2.85V 1.00nS 2.50V 2.12V 2.72V 1.20nS 2.38V 2.11V 2.59V 1.40nS 2.29V 2.09V 2.50V 1.60nS 2.17V 2.04V 2.36V 1.80nS 2.04V 1.96V 2.20V 2.00nS 1.89V 1.85V 2.00V 2.20nS 1.71V 1.74V 1.76V 2.40nS 1.51V 1.63V 1.49V 2.60nS 1.27V 1.50V 1.23V 2.80nS 0.99V 1.33V 0.98V 3.00nS 0.81V 1.17V 0.83V 3.20nS 0.71V 1.04V 0.75V 3.40nS 0.59V 0.87V 0.66V 3.60nS 0.51V 0.72V 0.57V 3.80nS 0.44V 0.59V 0.50V 4.00nS 0.37V 0.49V 0.45V 4.20nS 0.31V 0.40V 0.38V 4.40nS 0.26V 0.33V 0.32V 4.60nS 0.23V 0.28V 0.29V 4.80nS 0.20V 0.25V 0.26V

Freescale Semiconductor DSP56371 Technical Data 99 5.00nS 0.17V 0.21V 0.23V 5.20nS 0.15V 0.18V 0.20V 5.40nS 0.12V 0.14V 0.17V 5.60nS 92.71mV 0.11V 0.14V 5.80nS 79.46mV 96.17mV 0.12V 6.00nS 67.17mV 83.01mV 0.11V 6.20nS 54.74mV 65.86mV 89.82mV 6.40nS 42.77mV 53.06mV 75.55mV 6.60nS 33.26mV 41.31mV 61.63mV 6.80nS 25.46mV 31.29mV 50.25mV 7.00nS 18.21mV 23.99mV 40.51mV 7.20nS 13.43mV 16.92mV 31.37mV 7.40nS 8.06mV 11.32mV 23.11mV 7.60nS 4.81mV 6.46mV 15.54mV 7.80nS 3.27mV 4.82mV 12.49mV 8.00nS 1.98mV 3.62mV 9.63mV 8.20nS 1.32mV 2.10mV 6.17mV 8.40nS 0.78mV 1.45mV 4.24mV 8.60nS 0.50mV 1.01mV 2.46mV 8.80nS 0.42mV 0.70mV 1.45mV 9.00nS 0.34mV 0.61mV 0.94mV 9.20nS 0.30mV 0.51mV 0.50mV 9.40nS 0.27mV 0.45mV 0.38mV 9.60nS 0.24mV 0.40mV 0.28mV 9.80nS 0.21mV 0.35mV 0.23mV 10.00nS 0.22mV 0.32mV 0.21mV [Falling Waveform] R_fixture = 50.00 V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 3.30V 3.00V 3.60V 0.20nS 3.30V 3.00V 3.60V 0.40nS 3.30V 3.00V 3.60V 0.60nS 3.30V 3.00V 3.59V 0.80nS 3.30V 3.00V 3.52V 1.00nS 3.25V 3.00V 3.44V 1.20nS 3.18V 3.00V 3.37V 1.40nS 3.14V 3.00V 3.32V 1.60nS 3.09V 3.00V 3.24V 1.80nS 3.03V 2.97V 3.16V 2.00nS 2.96V 2.92V 3.07V 2.20nS 2.88V 2.88V 2.98V 2.40nS 2.80V 2.84V 2.88V 2.60nS 2.72V 2.80V 2.78V 2.80nS 2.61V 2.74V 2.65V

100 DSP56371 Technical Data Freescale Semiconductor

3.00nS 2.51V 2.68V 2.55V 3.20nS 2.44V 2.64V 2.47V 3.40nS 2.34V 2.58V 2.35V 3.60nS 2.25V 2.52V 2.23V 3.80nS 2.15V 2.46V 2.09V 4.00nS 2.06V 2.39V 1.93V 4.20nS 1.93V 2.32V 1.75V 4.40nS 1.81V 2.24V 1.58V 4.60nS 1.73V 2.20V 1.50V 4.80nS 1.65V 2.15V 1.43V 5.00nS 1.54V 2.09V 1.34V 5.20nS 1.44V 2.04V 1.26V 5.40nS 1.32V 1.97V 1.18V 5.60nS 1.23V 1.91V 1.11V 5.80nS 1.18V 1.87V 1.07V 6.00nS 1.13V 1.84V 1.04V 6.20nS 1.08V 1.79V 1.00V 6.40nS 1.04V 1.75V 0.96V 6.60nS 1.00V 1.71V 0.92V 6.80nS 0.96V 1.67V 0.89V 7.00nS 0.93V 1.63V 0.87V 7.20nS 0.90V 1.59V 0.84V 7.40nS 0.87V 1.54V 0.82V 7.60nS 0.85V 1.48V 0.80V 7.80nS 0.83V 1.44V 0.78V 8.00nS 0.82V 1.40V 0.78V 8.20nS 0.81V 1.35V 0.76V 8.40nS 0.80V 1.31V 0.75V 8.60nS 0.79V 1.27V 0.75V 8.80nS 0.78V 1.23V 0.74V 9.00nS 0.78V 1.20V 0.73V 9.20nS 0.78V 1.17V 0.73V 9.40nS 0.77V 1.15V 0.73V 9.60nS 0.77V 1.12V 0.72V 9.80nS 0.77V 1.10V 0.72V 10.00nS 0.77V 1.09V 0.72V | End [Model] prd24dgz | Model prt24dgz [Model] prt24dgz Model_type 3-state Polarity Non-Inverting Enable Active-Low Vmeas = 1.50V Cref = 50.00pF Rref = 1.00M Vref = 0.000V

Freescale Semiconductor DSP56371 Technical Data 101 C_comp 4.09pF 3.68pF 4.50pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] 0.000V 0.000V 0.000V [Pulldown] | voltage I(typ) I(min) I(max) -3.30 -10.00mA 0.000A 0.000A -3.10 0.000A 0.000A -10.00mA -2.90 0.000A 0.000A 0.000A -2.70 0.000A 0.000A 0.000A -2.50 0.000A 0.000A 0.000A -2.30 0.000A 0.000A -10.00mA -2.10 -10.00mA 0.000A -10.00mA -1.90 -10.00mA 0.000A -10.00mA -1.70 -10.00mA -10.00mA -10.00mA -1.50 -10.00mA -10.00mA -20.00mA -1.00 -20.00mA -10.00mA -23.00mA -0.90 -21.00mA -10.00mA -26.00mA -0.80 -41.70mA -12.00mA -55.37mA -0.70 -50.60mA -14.60mA -55.11mA -0.60 -46.07mA -25.10mA -50.21mA -0.50 -39.45mA -26.38mA -43.90mA -0.40 -32.03mA -22.06mA -36.09mA -0.30 -24.30mA -16.63mA -27.49mA -0.20 -16.36mA -11.10mA -18.57mA -0.00 3.97nA 7.41nA 12.45nA 0.10 8.11mA 5.36mA 9.30mA 0.20 15.76mA 10.38mA 18.18mA 0.30 22.98mA 15.05mA 26.64mA 0.40 29.76mA 19.40mA 34.68mA 0.50 36.11mA 23.42mA 42.32mA 0.60 42.04mA 27.11mA 49.54mA 0.70 47.55mA 30.50mA 56.36mA 0.80 52.65mA 33.58mA 62.78mA 0.90 57.35mA 36.36mA 68.80mA 1.00 61.64mA 38.84mA 74.42mA 1.10 65.54mA 41.04mA 79.65mA 1.20 69.06mA 42.96mA 84.48mA 1.30 72.18mA 44.61mA 88.92mA 1.40 74.93mA 45.99mA 92.97mA 1.50 77.31mA 47.12mA 96.63mA 1.60 79.32mA 48.01mA 99.91mA 1.70 80.95mA 48.68mA 0.10A 1.80 82.19mA 49.17mA 0.11A 1.90 83.08mA 49.54mA 0.11A

102 DSP56371 Technical Data Freescale Semiconductor

2.00 83.74mA 49.82mA 0.11A 2.10 84.23mA 50.06mA 0.11A 2.20 84.61mA 50.25mA 0.11A 2.30 84.93mA 50.42mA 0.11A 2.40 85.20mA 50.57mA 0.11A 2.50 85.43mA 50.70mA 0.11A 2.60 85.64mA 50.82mA 0.11A 2.70 85.83mA 50.93mA 0.11A 2.80 86.01mA 51.03mA 0.11A 2.90 86.17mA 51.13mA 0.11A 3.00 86.32mA 51.22mA 0.11A 3.10 86.47mA 51.31mA 0.11A 3.20 86.61mA 51.40mA 0.11A 3.30 86.75mA 51.50mA 0.11A 3.40 86.88mA 51.73mA 0.12A 3.50 87.01mA 52.32mA 0.12A 3.60 87.15mA 53.14mA 0.12A 3.70 87.30mA 54.01mA 0.12A 3.80 87.47mA 54.42mA 0.12A 3.90 87.77mA 52.16mA 0.12A 4.00 88.66mA 52.28mA 0.12A 4.10 90.00mA 52.42mA 0.12A 4.20 91.29mA 52.58mA 0.12A 4.30 89.03mA 52.77mA 0.12A 4.50 89.65mA 53.24mA 0.12A 4.70 90.63mA 53.86mA 0.12A 4.90 91.94mA 54.68mA 0.12A 5.10 93.62mA 55.72mA 0.12A 5.30 95.73mA 57.02mA 0.13A 5.50 98.29mA 58.58mA 0.13A 5.70 0.10A 60.42mA 0.13A 5.90 0.10A 62.54mA 0.14A 6.10 0.11A 64.92mA 0.14A 6.60 0.12A 71.81mA 0.15A [Pullup] | voltage I(typ) I(min) I(max) -3.30 0.22A 0.16A 0.25A -3.10 0.21A 0.16A 0.24A -2.90 0.20A 0.15A 0.23A -2.70 0.19A 0.14A 0.22A -2.50 0.18A 0.14A 0.21A -2.30 0.17A 0.13A 0.20A -2.10 0.16A 0.12A 0.18A -1.90 0.15A 0.11A 0.17A -1.70 0.14A 0.10A 0.16A -1.50 0.12A 90.13mA 0.14A -1.00 92.59mA 62.48mA 0.11A -0.90 84.26mA 56.95mA 97.88mA -0.80 75.03mA 54.36mA 87.19mA

Freescale Semiconductor DSP56371 Technical Data 103 -0.70 65.60mA 47.69mA 76.45mA -0.60 56.28mA 40.63mA 66.08mA -0.50 47.19mA 33.52mA 55.62mA -0.40 37.96mA 26.49mA 44.89mA -0.30 28.58mA 19.70mA 33.93mA -0.20 19.09mA 13.03mA 22.76mA -0.10 9.54mA 6.45mA 11.43mA 0.00 0.17uA 0.16uA 0.19uA 0.10 -9.23mA -6.17mA -11.15mA 0.20 -17.95mA -11.99mA -21.75mA 0.30 -26.16mA -17.46mA -31.79mA 0.40 -33.86mA -22.57mA -41.28mA 0.50 -41.07mA -27.35mA -50.24mA 0.60 -47.79mA -31.77mA -58.67mA 0.70 -54.04mA -35.86mA -66.58mA 0.80 -59.82mA -39.62mA -73.98mA 0.90 -65.13mA -43.05mA -80.88mA 1.00 -69.99mA -46.15mA -87.29mA 1.10 -74.41mA -48.92mA -93.21mA 1.20 -78.38mA -51.38mA -98.65mA 1.30 -81.93mA -53.52mA -0.10A 1.40 -85.05mA -55.36mA -0.11A 1.50 -87.75mA -56.88mA -0.11A 1.60 -90.05mA -58.12mA -0.12A 1.70 -91.96mA -59.09mA -0.12A 1.80 -93.52mA -59.84mA -0.12A 1.90 -94.78mA -60.43mA -0.12A 2.00 -95.80mA -60.92mA -0.13A 2.10 -96.66mA -61.35mA -0.13A 2.20 -97.39mA -61.72mA -0.13A 2.30 -98.03mA -62.06mA -0.13A 2.40 -98.58mA -62.37mA -0.13A 2.50 -99.08mA -62.65mA -0.13A 2.60 -99.52mA -62.91mA -0.13A 2.70 -99.92mA -63.15mA -0.13A

104 DSP56371 Technical Data Freescale Semiconductor

5.10 -20.27A -25.88A -13.90A 5.30 -24.35A -29.44A -18.14A 5.50 -28.43A -33.00A -22.38A 5.70 -32.51A -36.56A -26.62A 5.90 -36.60A -40.13A -30.86A 6.10 -40.68A -43.69A -35.09A 6.60 -50.89A -52.59A -45.69A [GND_clamp] | voltage I(typ) I(min) I(max) -0.00 -76.61nA -77.36nA -91.73nA 0.10 -68.52nA -64.82nA -83.30nA 0.20 -60.47nA -56.49nA -75.01nA 0.30 -52.43nA -48.39nA -66.73nA

Freescale Semiconductor DSP56371 Technical Data 105 0.40 -44.39nA -40.30nA -58.46nA 0.50 -36.35nA -32.21nA -50.19nA 0.60 -28.31nA -24.12nA -41.93nA 0.70 -20.27nA -16.03nA -33.68nA 0.80 -12.24nA -7.94nA -25.42nA 0.90 -4.20nA 0.15nA -17.17nA 1.00 3.83nA 8.23nA -8.92nA 1.10 11.86nA 16.32nA -0.67nA 1.20 19.89nA 24.41nA 7.58nA 1.30 27.92nA 32.50nA 15.84nA 1.40 35.95nA 40.59nA 24.10nA 1.50 43.98nA 48.68nA 32.36nA 1.60 52.00nA 56.77nA 40.64nA 1.70 60.02nA 64.85nA 48.92nA 1.80 68.04nA 72.94nA 57.21nA 1.90 76.05nA 81.03nA 65.52nA 2.00 84.05nA 89.12nA 73.85nA 2.10 92.04nA 97.20nA 82.20nA 2.20 100.00nA 0.11uA 90.59nA 2.30 0.11uA 0.11uA 99.01nA 2.40 0.12uA 0.12uA 0.11uA 2.50 0.12uA 0.12uA 0.12uA 2.60 0.13uA 0.13uA 0.12uA 2.70 0.13uA 0.13uA 0.13uA 2.80 0.14uA 0.13uA 0.14uA 2.90 0.14uA 0.14uA 0.15uA 3.00 0.15uA 0.15uA 0.15uA 3.10 0.15uA 0.17uA 0.16uA 3.20 0.15uA 0.56uA 0.16uA 3.30 0.16uA 0.19uA 0.17uA [POWER_clamp] | voltage I(typ) I(min) I(max) -3.30 0.37uA 0.37uA 0.40uA -3.20 0.37uA 0.36uA 0.39uA -3.10 0.36uA 0.36uA 0.39uA -3.00 0.35uA 0.35uA 0.38uA -2.90 0.35uA 0.34uA 0.37uA -2.80 0.34uA 0.34uA 0.37uA -2.70 0.33uA 0.33uA 0.36uA -2.60 0.33uA 0.33uA 0.36uA -2.50 0.32uA 0.32uA 0.35uA -2.40 0.32uA 0.31uA 0.34uA -2.30 0.31uA 0.31uA 0.34uA -2.20 0.30uA 0.30uA 0.33uA -2.10 0.30uA 0.29uA 0.32uA -2.00 0.29uA 0.29uA 0.32uA -1.90 0.28uA 0.28uA 0.31uA -1.80 0.28uA 0.28uA 0.30uA -1.70 0.27uA 0.27uA 0.30uA

106 DSP56371 Technical Data Freescale Semiconductor

-1.60 0.27uA 0.26uA 0.29uA -1.50 0.26uA 0.26uA 0.29uA -1.40 0.25uA 0.25uA 0.28uA -1.30 0.25uA 0.25uA 0.27uA -1.20 0.24uA 0.24uA 0.27uA -1.10 0.24uA 0.23uA 0.26uA -1.00 0.23uA 0.23uA 0.25uA -0.90 0.22uA 0.22uA 0.25uA -0.80 0.22uA 0.22uA 0.24uA -0.70 0.21uA 0.21uA 0.24uA -0.60 0.21uA 0.20uA 0.23uA -0.50 0.20uA 0.20uA 0.22uA -0.40 0.20uA 0.19uA 0.22uA -0.30 0.19uA 0.19uA 0.21uA -0.20 0.48mA 0.56uA 0.72uA -0.10 0.16uA 0.17uA 0.18uA 0.00 0.16uA 0.15uA 0.18uA [Ramp] | variable typ min max R_load = 50.00 [Rising Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H C_fixture = 0.000F time V(typ) V(min) V(max) 0.000S 0.70uV 0.93uV 0.69uV 0.20nS 0.46uV 0.77uV 0.000V 0.40nS -5.77uV -1.75uV 11.67uV 0.60nS -0.27mV -5.10uV -2.79mV 0.80nS -2.96mV 26.03uV -6.12mV 1.00nS -3.62mV -5.61uV 32.64mV 1.20nS 19.35mV -0.80mV 81.12mV 1.40nS 46.31mV -3.19mV 0.11V 1.60nS 79.98mV -6.88mV 0.16V 1.80nS 0.12V -0.22mV 0.21V 2.00nS 0.16V 21.89mV 0.27V 2.20nS 0.20V 48.68mV 0.33V 2.40nS 0.26V 76.62mV 0.41V 2.60nS 0.32V 0.11V 0.49V 2.80nS 0.42V 0.16V 0.61V 3.00nS 0.51V 0.20V 0.73V 3.20nS 0.58V 0.24V 0.82V

Freescale Semiconductor DSP56371 Technical Data 107 3.40nS 0.71V 0.30V 0.99V 3.60nS 0.85V 0.36V 1.17V 3.80nS 1.01V 0.45V 1.36V 4.00nS 1.18V 0.54V 1.56V 4.20nS 1.38V 0.67V 1.81V 4.40nS 1.57V 0.81V 2.03V 4.60nS 1.69V 0.89V 2.16V 4.80nS 1.79V 0.96V 2.27V 5.00nS 1.91V 1.06V 2.40V 5.20nS 2.03V 1.15V 2.52V 5.40nS 2.14V 1.26V 2.61V 5.60nS 2.24V 1.35V 2.70V 5.80nS 2.28V 1.40V 2.74V 6.00nS 2.31V 1.45V 2.77V 6.20nS 2.36V 1.51V 2.80V 6.40nS 2.39V 1.56V 2.83V 6.60nS 2.41V 1.61V 2.85V 6.80nS 2.43V 1.66V 2.86V 7.00nS 2.45V 1.70V 2.87V 7.20nS 2.46V 1.74V 2.88V 7.40nS 2.48V 1.78V 2.89V 7.60nS 2.49V 1.82V 2.90V 7.80nS 2.50V 1.84V 2.91V 8.00nS 2.51V 1.86V 2.91V 8.20nS 2.52V 1.88V 2.92V 8.40nS 2.52V 1.90V 2.92V 8.60nS 2.53V 1.92V 2.93V 8.80nS 2.54V 1.93V 2.93V 9.00nS .54V 1.95V 2.93V 9.20nS 2.55V 1.96V 2.94V 9.40nS 2.55V 1.97V 2.94V 9.60nS 2.56V 1.99V 2.94V 9.80nS 2.56V 2.00V 2.95V 10.00nS 2.57V 2.00V 2.95V [Rising Waveform] R_fixture = 50.00 V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 0.76V 1.03V 0.72V 0.20nS 0.76V 1.03V 0.72V 0.40nS 0.76V 1.03V 0.72V 0.60nS 0.76V 1.03V 0.72V 0.80nS 0.77V 1.03V 0.73V 1.00nS 0.81V 1.03V 0.82V 1.20nS 0.90V 1.03V 0.93V

108 DSP56371 Technical Data Freescale Semiconductor

1.40nS 0.98V 1.04V 1.02V 1.60nS 1.10V 1.11V 1.13V 1.80nS 1.22V 1.21V 1.26V 2.00nS 1.36V 1.33V 1.42V 2.20nS 1.53V 1.46V 1.58V 2.40nS 1.72V 1.60V 1.80V 2.60nS 1.93V 1.75V 2.04V 2.80nS 2.23V 1.97V 2.36V 3.00nS 2.48V 2.16V 2.62V 3.20nS 2.66V 2.30V 2.82V 3.40nS 2.85V 2.49V 3.04V 3.60nS 2.97V 2.63V 3.19V 3.80nS 3.09V 2.73V 3.29V 4.00nS 3.14V 2.83V 3.36V 4.20nS 3.19V 2.89V 3.42V 4.40nS 3.23V 2.94V 3.47V 4.60nS 3.25V 2.96V 3.50V 4.80nS 3.27V 2.97V 3.52V 5.00nS 3.28V 2.98V 3.54V 5.20nS .29V 2.99V 3.56V 5.40nS 3.29V 2.99V 3.57V 5.60nS 3.30V 3.00V 3.58V 5.80nS 3.30V 3.00V 3.59V 6.00nS 3.30V 3.00V 3.59V 6.20nS 3.30V 3.00V 3.60V 6.40nS 3.30V 3.00V 3.60V 6.60nS 3.30V 3.00V 3.60V 6.80nS 3.30V 3.00V 3.60V 7.00nS 3.30V 3.00V 3.60V 7.20nS 3.30V 3.00V 3.60V 7.40nS 3.30V 3.00V 3.60V 7.60nS 3.30V 3.00V 3.60V 7.80nS 3.30V 3.00V 3.60V 8.00nS 3.30V 3.00V 3.60V 8.20nS 3.30V 3.00V 3.60V 8.40nS 3.30V 3.00V 3.60V 8.60nS 3.30V 3.00V 3.60V 8.80nS 3.30V 3.00V 3.60V 9.00nS 3.30V 3.00V 3.60V 9.20nS 3.30V 3.00V 3.60V 9.40nS 3.30V 3.00V 3.60V 9.60nS 3.30V 3.00V 3.60V 9.80nS 3.30V 3.00V 3.60V 10.00nS 3.30V 3.00V 3.60V [Falling Waveform] R_fixture = 50.00 V_fixture = 0.000 V_fixture_min = 0.000 V_fixture_max = 0.000 L_fixture = 0.000H

Freescale Semiconductor DSP56371 Technical Data 109 C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 2.62V 2.12V 2.99V 0.20nS 2.62V 2.12V 2.99V 0.40nS 2.62V 2.12V 2.99V 0.60nS 2.62V 2.12V 2.96V 0.80nS 2.60V 2.12V 2.85V 1.00nS 2.50V 2.12V 2.72V 1.20nS 2.37V 2.11V 2.59V 1.40nS 2.29V 2.09V 2.50V 1.60nS 2.17V 2.04V 2.36V 1.80nS 2.04V 1.96V 2.20V 2.00nS 1.89V 1.85V 2.00V 2.20nS 1.71V 1.74V 1.75V 2.40nS 1.50V 1.63V 1.48V 2.60nS 1.28V 1.50V 1.24V 2.80nS 1.01V 1.33V 1.01V 3.00nS 0.82V 1.17V 0.82V 3.20nS 0.72V 1.04V 0.75V 3.40nS 0.61V 0.87V 0.65V 3.60nS 0.51V 0.72V 0.57V 3.80nS 0.44V 0.60V 0.50V 4.00nS 0.38V 0.49V 0.44V 4.20nS 0.32V 0.40V 0.38V 4.40nS 0.26V 0.32V 0.32V 4.60nS 0.23V 0.28V 0.29V 4.80nS 0.21V 0.25V 0.26V 5.00nS 0.17V 0.21V 0.23V 5.20nS 0.15V 0.18V 0.20V 5.40nS 0.12V 0.14V 0.17V 5.60nS 93.14mV 0.11V 0.14V 5.80nS 80.86mV 94.78mV 0.12V 6.00nS 68.57mV 80.67mV 0.11V 6.20nS 55.24mV 65.96mV 90.13mV 6.40nS 43.92mV 51.39mV 74.96mV 6.60nS 33.33mV 40.71mV 61.03mV 6.80nS 25.91mV 31.19mV 50.31mV 7.00nS 18.81mV 22.83mV 39.65mV 7.20nS 13.52mV 17.13mV 31.61mV 7.40nS 8.40mV 10.61mV 22.62mV 7.60nS 4.73mV 6.73mV 15.75mV 7.80nS 3.46mV 4.67mV 12.43mV 8.00nS 2.19mV 3.16mV 9.14mV 8.20nS 1.26mV 2.23mV 6.37mV 8.40nS 0.84mV 1.32mV 4.12mV 8.60nS 0.49mV 0.95mV 2.29mV 8.80nS 0.41mV 0.74mV 1.55mV 9.00nS 0.35mV 0.58mV 0.81mV 9.20nS 0.31mV 0.51mV 0.53mV 9.40nS 0.28mV 0.45mV 0.39mV

110 DSP56371 Technical Data Freescale Semiconductor

9.60nS 0.24mV 0.40mV 0.27mV 9.80nS 0.22mV 0.36mV 0.24mV 10.00nS 0.20mV 0.32mV 0.21mV [Falling Waveform] R_fixture = 50.00 V_fixture = 3.30 V_fixture_min = 3.00 V_fixture_max = 3.60 L_fixture = 0.000H C_fixture = 0.000F | time V(typ) V(min) V(max) 0.000S 3.30V 3.00V 3.60V 0.20nS 3.30V 3.00V 3.60V 0.40nS 3.30V 3.00V 3.60V 0.60nS 3.30V 3.00V 3.59V 0.80nS 3.30V 3.00V 3.52V 1.00nS 3.25V 3.00V 3.44V 1.20nS 3.18V 3.00V 3.37V 1.40nS 3.14V 3.00V 3.32V 1.60nS 3.09V 3.00V 3.24V 1.80nS 3.03V 2.97V 3.16V 2.00nS 2.96V 2.92V 3.07V 2.20nS 2.88V 2.88V 2.98V 2.40nS 2.80V 2.84V 2.88V 2.60nS 2.72V 2.80V 2.77V 2.80nS 2.60V 2.74V 2.64V 3.00nS 2.51V 2.68V 2.54V 3.20nS 2.44V 2.64V 2.46V 3.40nS 2.34V 2.58V 2.34V 3.60nS 2.25V 2.52V 2.22V 3.80nS 2.15V 2.46V 2.08V 4.00nS 2.05V 2.39V 1.92V 4.20nS 1.93V 2.32V 1.74V 4.40nS 1.81V 2.24V 1.58V 4.60nS 1.73V 2.19V 1.50V 4.80nS 1.65V 2.15V 1.42V 5.00nS 1.53V 2.09V 1.34V 5.20nS 1.43V 2.04V 1.26V 5.40nS 1.32V 1.97V 1.18V 5.60nS 1.22V 1.91V 1.11V 5.80nS 1.18V 1.87V 1.07V 6.00nS 1.13V 1.84V 1.03V 6.20nS 1.08V 1.79V 0.99V 6.40nS 1.03V 1.75V 0.95V 6.60nS 0.99V 1.70V 0.92V 6.80nS 0.96V 1.66V 0.89V 7.00nS 0.93V 1.63V 0.87V 7.20nS 0.90V 1.59V 0.84V 7.40nS 0.87V 1.53V 0.82V

Freescale Semiconductor DSP56371 Technical Data 111 7.60nS 0.84V 1.47V 0.80V 7.80nS 0.83V 1.44V 0.78V 8.00nS 0.82V 1.40V 0.78V 8.20nS 0.81V 1.35V 0.76V 8.40nS 0.80V 1.30V 0.75V 8.60nS 0.79V 1.26V 0.75V 8.80nS 0.78V 1.23V 0.74V 9.00nS 0.78V 1.19V 0.73V 9.20nS 0.78V 1.17V 0.73V 9.40nS 0.77V 1.14V 0.73V 9.60nS 0.77V 1.12V 0.72V 9.80nS 0.77V 1.10V 0.72V 10.00nS 0.77V 1.08V 0.72V | End [Model] prt24dgz | Model pdusdgz [Model] pdusdgz Model_type Input Polarity Non-Inverting Vinl = 0.000V Vinh = 3.30V C_comp 5.00pF 5.00pF 5.00pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] 0.000V 0.000V 0.000V [GND_clamp] | voltage I(typ) I(min) I(max)

112 DSP56371 Technical Data Freescale Semiconductor

-0.20 -60.52uA -36.82uA -86.29uA -0.00 -60.40uA -35.33uA -85.95uA 0.20 -60.32uA -35.27uA -85.85uA 0.40 -60.23uA -35.20uA -85.73uA 0.60 -60.11uA -35.13uA -85.57uA 0.80 -59.96uA -35.03uA -85.37uA 1.00 -59.74uA -34.91uA -85.08uA 1.20 -59.32uA -34.50uA -84.56uA 1.40 -58.35uA -33.59uA -83.44uA 1.60 -56.47uA -31.92uA -81.36uA 1.80 -53.57uA -29.25uA -78.20uA 2.00 -49.55uA -7.60uA -73.89uA 2.20 -43.70uA -16.78nA -68.43uA 2.40 -3.73uA 0.10uA -61.70uA 2.60 0.10uA 0.11uA -51.99uA 2.80 0.12uA 0.12uA -2.43uA 3.00 0.13uA 0.13uA 0.13uA 3.20 0.14uA 0.20uA 0.14uA 3.40 0.15uA 0.15uA 0.15uA 3.60 0.16uA 96.30nA 0.16uA 3.80 0.17uA 43.50nA 0.17uA 4.00 0.18uA -9.30nA 0.18uA 4.20 0.18uA 62.10nA 0.19uA 4.40 0.19uA -0.11uA 0.20uA 4.60 0.20uA -0.17uA 0.21uA 4.80 0.21uA -0.22uA 0.22uA 5.00 0.22uA -0.27uA 0.23uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 0.61uA 0.59uA 0.65uA -4.90 0.60uA 0.58uA 0.65uA -4.80 0.59uA 0.58uA 0.64uA -4.70 0.59uA 0.57uA 0.63uA -4.60 0.58uA 0.56uA 0.63uA -4.50 0.57uA 0.56uA 0.62uA -4.40 0.56uA 0.55uA 0.61uA -4.30 0.56uA 0.54uA 0.60uA -4.20 0.55uA 0.54uA 0.60uA -4.10 0.54uA 0.53uA 0.59uA -4.00 0.54uA 0.52uA 0.58uA

Freescale Semiconductor DSP56371 Technical Data 113 -3.90 0.53uA 0.52uA 0.58uA -3.80 0.52uA 0.51uA 0.57uA -3.70 0.52uA 0.50uA 0.56uA -3.60 0.51uA 0.50uA 0.56uA -3.50 0.50uA 0.49uA 0.55uA -3.40 0.50uA 0.48uA 0.54uA -3.30 0.49uA 0.48uA 0.53uA -3.20 0.48uA 0.47uA 0.53uA -3.10 0.48uA 0.46uA 0.52uA -3.00 0.47uA 0.46uA 0.51uA -2.90 0.46uA 0.45uA 0.51uA -2.80 0.46uA 0.44uA 0.50uA -2.70 0.45uA 0.44uA 0.49uA -2.60 0.44uA 0.43uA 0.49uA -2.50 0.44uA 0.42uA 0.48uA -2.40 0.43uA 0.41uA 0.47uA -2.30 0.42uA 0.41uA 0.46uA -2.20 0.42uA 0.40uA 0.46uA -2.10 0.41uA 0.39uA 0.45uA -2.00 0.40uA 0.39uA 0.44uA -1.90 0.39uA 0.38uA 0.44uA -1.80 0.39uA 0.37uA 0.43uA -1.70 0.38uA 0.37uA 0.42uA -1.60 0.37uA 0.36uA 0.42uA -1.50 0.37uA 0.35uA 0.41uA -1.40 0.36uA 0.35uA 0.40uA -1.30 0.35uA 0.34uA 0.39uA -1.20 0.35uA 0.33uA 0.39uA -1.10 0.34uA 0.33uA 0.38uA -1.00 0.33uA 0.32uA 0.37uA -0.90 0.33uA 0.31uA 0.37uA -0.80 0.32uA 0.31uA 0.36uA -0.70 0.31uA 0.30uA 0.35uA -0.60 0.31uA 0.29uA 0.35uA -0.50 0.30uA 0.29uA 0.34uA -0.40 0.29uA 0.28uA 0.33uA -0.30 0.29uA 0.27uA 0.32uA -0.20 0.28uA 0.27uA 0.32uA -0.10 0.27uA 0.26uA 0.31uA 0.00 0.27uA 0.25uA 0.30uA | End [Model] pdusdgz | Model pdddgz [Model] pdddgz Model_type Input Polarity Non-Inverting Vinl = 0.000V

114 DSP56371 Technical Data Freescale Semiconductor

Vinh = 3.30V C_comp 5.00pF 5.00pF 5.00pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] \\ 0.000V 0.000V 0.000V [GND_clamp] | voltage I(typ) I(min) I(max) -0.20 -27.91uA -14.61uA -42.88uA 0.20 18.71uA 7.31uA 32.27uA 0.40 29.18uA 10.24uA 54.12uA 0.60 32.49uA 10.66uA 65.78uA 0.80 33.06uA 10.78uA 69.33uA 1.00 33.29uA 10.85uA 70.16uA 1.20 33.44uA 10.91uA 70.54uA 1.40 33.56uA 10.96uA 70.78uA 1.60 33.66uA 11.01uA 70.98uA 1.80 33.76uA 11.06uA 71.15uA 2.00 33.85uA 11.10uA 71.30uA 2.20 33.94uA 11.12uA 71.44uA 2.40 33.99uA 11.13uA 71.59uA 2.60 34.01uA 11.14uA 71.74uA

Freescale Semiconductor DSP56371 Technical Data 115 2.80 34.02uA 11.15uA 71.82uA 3.00 34.03uA 11.16uA 71.84uA 3.20 34.04uA 11.25uA 71.85uA 3.40 34.06uA 11.17uA 71.87uA 3.60 34.08uA 11.09uA 71.89uA 3.80 34.10uA 11.01uA 71.91uA 4.00 34.12uA 10.93uA 71.93uA 4.20 34.14uA 10.85uA 71.95uA 4.40 34.16uA 10.77uA 71.97uA 4.60 34.18uA 10.69uA 71.99uA 4.80 34.20uA 10.61uA 72.01uA 5.00 34.22uA 10.53uA 72.03uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 48.19uA 16.29uA 95.53uA -4.90 47.87uA 16.17uA 95.03uA -4.80 47.55uA 16.05uA 94.53uA -4.70 47.23uA 15.93uA 94.03uA -4.60 46.91uA 15.81uA 93.53uA -4.50 46.59uA 15.69uA 93.03uA -4.40 46.27uA 15.57uA 92.53uA -4.30 45.95uA 15.45uA 92.03uA -4.20 45.63uA 15.33uA 91.53uA -4.10 45.31uA 15.21uA 91.03uA -4.00 44.99uA 15.09uA 90.53uA -3.90 44.67uA 14.97uA 90.03uA -3.80 44.35uA 14.85uA 89.53uA -3.70 44.03uA 14.73uA 89.03uA -3.60 43.71uA 14.61uA 88.53uA -3.50 43.39uA 14.49uA 88.03uA -3.40 43.07uA 14.37uA 87.53uA -3.30 42.75uA 14.25uA 87.03uA -3.20 42.43uA 14.13uA 86.53uA -3.10 42.11uA 14.01uA 86.03uA -3.00 41.79uA 13.89uA 85.53uA -2.90 41.47uA 13.77uA 85.03uA -2.80 41.15uA 13.65uA 84.53uA -2.70 40.83uA 13.53uA 84.03uA -2.60 40.51uA 13.41uA 83.53uA -2.50 40.19uA 13.29uA 83.03uA -2.40 39.87uA 13.17uA 82.53uA -2.30 39.55uA 13.05uA 82.03uA -2.20 39.23uA 12.93uA 81.53uA -2.10 38.91uA 12.81uA 81.03uA -2.00 38.59uA 12.69uA 80.53uA -1.90 38.27uA 12.57uA 80.03uA -1.80 37.95uA 12.45uA 79.53uA -1.70 37.63uA 12.33uA 79.03uA -1.60 37.31uA 12.22uA 78.53uA

116 DSP56371 Technical Data Freescale Semiconductor

-1.50 36.99uA 12.11uA 78.03uA -1.40 36.68uA 12.01uA 77.53uA -1.30 36.38uA 11.92uA 77.03uA -1.20 36.11uA 11.84uA 76.53uA -1.10 35.86uA 11.76uA 76.03uA -1.00 35.63uA 11.69uA 75.53uA -0.90 35.41uA 11.63uA 75.06uA -0.80 35.22uA 11.57uA 74.63uA -0.70 35.05uA 11.52uA 74.24uA -0.60 34.90uA 11.48uA 73.89uA -0.50 34.77uA 11.44uA 73.58uA -0.40 34.65uA 11.41uA 73.30uA -0.30 34.55uA 11.38uA 73.06uA -0.20 34.47uA 11.35uA 72.86uA -0.10 34.40uA 11.33uA 72.68uA 0.00 34.34uA 11.31uA 72.54uA | End [Model] pdddgz | Model pdudgz [Model] pdudgz Model_type Input Polarity Non-Inverting Vinl = 0.000V Vinh = 3.30V C_comp 5.00pF 5.00pF 5.00pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] 0.000V 0.000V 0.000V [GND_clamp] | voltage I(typ) I(min) I(max)

Freescale Semiconductor DSP56371 Technical Data 117 -0.20 -60.52uA -36.82uA -86.29uA -0.00 -60.40uA -35.33uA -85.95uA 0.20 -60.32uA -35.27uA -85.85uA 0.40 -60.23uA -35.20uA -85.73uA 0.60 -60.11uA -35.13uA -85.57uA 0.80 -59.96uA -35.03uA -85.37uA 1.00 -59.74uA -34.87uA -85.08uA 1.20 -59.32uA -34.50uA -84.56uA 1.40 -58.35uA -33.59uA -83.44uA 1.60 -56.47uA -31.92uA -81.36uA 1.80 -53.57uA -29.25uA -78.20uA 2.00 -49.55uA -7.60uA -73.89uA 2.20 -43.70uA -16.78nA -68.43uA 2.40 -3.73uA 0.10uA 61.70uA 2.60 0.10uA 0.11uA 51.99uA 2.80 0.12uA 0.12uA -2.43uA 3.00 0.13uA 0.13uA 0.13uA 3.20 0.14uA 0.20uA 0.14uA 3.40 0.15uA 0.15uA 0.15uA 3.60 0.16uA 96.30nA 0.16uA 3.80 0.17uA 43.50nA 0.17uA 4.00 0.18uA -9.30nA 0.18uA 4.20 0.18uA 62.10nA 0.19uA 4.40 0.19uA -0.11uA 0.20uA 4.60 0.20uA -0.17uA 0.21uA 4.80 0.21uA -0.22uA 0.22uA 5.00 0.22uA -0.27uA 0.23uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 0.61uA 0.59uA 0.65uA -4.90 0.60uA 0.58uA 0.65uA -4.80 0.59uA 0.58uA 0.64uA -4.70 0.59uA 0.57uA 0.63uA -4.60 0.58uA 0.56uA 0.63uA -4.50 0.57uA 0.56uA 0.62uA -4.40 0.56uA 0.55uA 0.61uA -4.30 0.56uA 0.54uA 0.60uA

118 DSP56371 Technical Data Freescale Semiconductor

-4.20 0.55uA 0.54uA 0.60uA -4.10 0.54uA 0.53uA 0.59uA -4.00 0.54uA 0.52uA 0.58uA -3.90 0.53uA 0.52uA 0.58uA -3.80 0.52uA 0.51uA 0.57uA -3.70 0.52uA 0.50uA 0.56uA -3.60 0.51uA 0.50uA 0.56uA -3.50 0.50uA 0.49uA 0.55uA -3.40 0.50uA 0.48uA 0.54uA -3.30 0.49uA 0.48uA 0.53uA -3.20 0.48uA 0.47uA 0.53uA -3.10 0.48uA 0.46uA 0.52uA -3.00 0.47uA 0.46uA 0.51uA -2.90 0.46uA 0.45uA 0.51uA -2.80 0.46uA 0.44uA 0.50uA -2.70 0.45uA 0.44uA 0.49uA -2.60 0.44uA 0.43uA 0.49uA -2.50 0.44uA 0.42uA 0.48uA -2.40 0.43uA 0.41uA 0.47uA -2.30 0.42uA 0.41uA 0.46uA -2.20 0.42uA 0.40uA 0.46uA -2.10 0.41uA 0.39uA 0.45uA -2.00 0.40uA 0.39uA 0.44uA -1.90 0.39uA 0.38uA 0.44uA -1.80 0.39uA 0.37uA 0.43uA -1.70 0.38uA 0.37uA 0.42uA -1.60 0.37uA 0.36uA 0.42uA -1.50 0.37uA 0.35uA 0.41uA -1.40 0.36uA 0.35uA 0.40uA -1.30 0.35uA 0.34uA 0.39uA -1.20 0.35uA 0.33uA 0.39uA -1.10 0.34uA 0.33uA 0.38uA -1.00 0.33uA 0.32uA 0.37uA -0.90 0.33uA 0.31uA 0.37uA -0.80 0.32uA 0.31uA 0.36uA -0.70 0.31uA 0.30uA 0.35uA -0.60 0.31uA 0.29uA 0.35uA -0.50 0.30uA 0.29uA 0.34uA -0.40 0.29uA 0.28uA 0.33uA -0.30 0.29uA 0.27uA 0.32uA -0.20 0.28uA 0.27uA 0.32uA -0.10 0.27uA 0.26uA 0.31uA 0.00 0.27uA 0.25uA 0.30uA | End [Model] pdudgz | Model pdidgz [Model] pdidgz

Freescale Semiconductor DSP56371 Technical Data 119 Model_type Input Polarity Non-Inverting Vinl = 0.000V Vinh = 3.30V C_comp 5.00pF 5.00pF 5.00pF [Temperature Range] 25.00 0.12k 0.000 [Pullup Reference] 3.30V 3.00V 3.60V [Pulldown Reference] 0.000V 0.000V 0.000V [POWER Clamp Reference] 5.00V 4.50V 5.50V [GND Clamp Reference] 0.000V 0.000V 0.000V [GND_clamp] | voltage I(typ) I(min) I(max) 0.20 -72.38nA -68.50nA -88.30nA 0.40 -56.11nA -52.12nA -71.55nA 0.60 -39.84nA -35.76nA -54.82nA 0.80 -23.57nA -19.40nA -38.12nA 1.00 -7.31nA -3.04nA -21.42nA 1.20 8.94nA 13.32nA -4.73nA 1.40 25.19nA 29.68nA 11.97nA 1.60 41.42nA 46.03nA 28.68nA 1.80 57.64nA 62.39nA 45.42nA 2.00 73.83nA 78.74nA 62.20nA

120 DSP56371 Technical Data Freescale Semiconductor

2.20 89.95nA 94.86nA 79.06nA 2.40 0.11uA 0.11uA 96.02nA 2.60 0.12uA 0.12uA 0.11uA 2.80 0.13uA 0.13uA 0.13uA 3.00 0.14uA 0.14uA 0.14uA 3.20 0.15uA 0.21uA 0.15uA 3.40 0.15uA 0.15uA 0.16uA 3.60 0.16uA 0.10uA 0.17uA 3.80 0.17uA 47.20nA 0.18uA 4.00 0.18uA -5.80nA 0.18uA 4.20 0.20uA -0.11uA 0.20uA 4.60 0.20uA -0.16uA 0.21uA 4.80 0.21uA -0.22uA 0.22uA 5.00 0.22uA -0.27uA 0.23uA [POWER_clamp] | voltage I(typ) I(min) I(max) -5.00 0.60uA 0.59uA 0.65uA -4.90 0.60uA 0.58uA 0.64uA -4.80 0.59uA 0.58uA 0.64uA -4.70 0.58uA 0.57uA 0.63uA -4.60 0.58uA 0.56uA 0.62uA -4.50 0.57uA 0.56uA 0.62uA -4.40 0.56uA 0.55uA 0.61uA -4.30 0.56uA 0.54uA 0.60uA -4.20 0.55uA 0.54uA 0.59uA -4.10 0.54uA 0.53uA 0.59uA -4.00 0.54uA 0.52uA 0.58uA -3.90 0.53uA 0.52uA 0.57uA -3.80 0.52uA 0.51uA 0.57uA -3.70 0.52uA 0.50uA 0.56uA -3.60 0.51uA 0.50uA 0.55uA -3.50 0.50uA 0.49uA 0.55uA -3.40 0.49uA 0.48uA 0.54uA -3.30 0.49uA 0.48uA 0.53uA -3.20 0.48uA 0.47uA 0.53uA -3.10 0.47uA 0.46uA 0.52uA -3.00 0.47uA 0.46uA 0.51uA -2.90 0.46uA 0.45uA 0.51uA -2.80 0.45uA 0.44uA 0.50uA -2.70 0.45uA 0.43uA 0.49uA -2.60 0.44uA 0.43uA 0.48uA -2.50 0.43uA 0.42uA 0.48uA -2.40 0.43uA 0.41uA 0.47uA -2.30 0.42uA 0.41uA 0.46uA -2.20 0.41uA 0.40uA 0.46uA -2.10 0.41uA 0.39uA 0.45uA -2.00 0.40uA 0.39uA 0.44uA -1.90 0.39uA 0.38uA 0.44uA -1.80 0.39uA 0.37uA 0.43uA

Freescale Semiconductor DSP56371 Technical Data 121 -1.70 0.38uA 0.37uA 0.42uA -1.60 0.37uA 0.36uA 0.42uA -1.50 0.37uA 0.35uA 0.41uA -1.40 0.36uA 0.35uA 0.40uA -1.30 0.35uA 0.34uA 0.39uA -1.20 0.35uA 0.33uA 0.39uA -1.10 0.34uA 0.33uA 0.38uA -1.00 0.33uA 0.32uA 0.37uA -0.90 0.33uA 0.31uA 0.37uA -0.80 0.32uA 0.31uA 0.36uA -0.70 0.31uA 0.30uA 0.35uA -0.60 0.31uA 0.29uA 0.35uA -0.50 0.30uA 0.29uA 0.34uA -0.40 0.29uA 0.28uA 0.33uA -0.30 0.29uA 0.27uA 0.33uA -0.20 0.28uA 0.27uA 0.32uA -0.10 0.28uA 0.26uA 0.31uA 0.00 0.27uA 0.26uA 0.31uA | End [Model] pdidgz

122 DSP56371 Technical Data Freescale Semiconductor

Freescale Semiconductor DSP56371 Technical Data 123 NOTES

How to Reach Us: Home Page: www.freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 1-800-521-6274 or 480-768-2130 Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0063 Japan 0120 191014 or +81 3 5437 9125 support-japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center

2 Dai King Street

Tai Po, N.T., Hong Kong 852-26668334 For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2005. All rights reserved. DSP56371 Rev. 3 Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part.