DSP1A-L2-DC6V | DigiCamel IC Datasheet

Online Datasheet

Read DSP1A-L2-DC6V online.

DSP1-DC3V NAIS | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 5

Technical content

20.2 .795 11.0 .433 10.5 .413

FEATURES

Power types added to DS relay series
High switching capacity: 1a: 8 A 250 V AC / 1a1b, 2a: 5 A 250 V AC
High sensitivity: 190 mW pick-up power
High contact welding resistance
Latching types available
High breakdown voltage 3,000 Vrms between contacts and coil 1,000 Vrms between open contacts Meeting FCC Part 68
Sealed types are standard SPECIFICATIONS Contact Coil (polarized) (at 20 C 68 Note: All speciﬁcations are based on the condition of 25 C 77°F, 50% R.H. unless otherwise speciﬁed. Characteristics Remarks * Speciﬁcations will vary with foreign standards certiﬁcation ratings. Measurement at same location as "Initial breakdown voltage" section Detection current: 10mA Excluding contact bounce time Half-wave pulse of sine wave: 11ms; detection time: 10 m s Half-wave pulse of sine wave: 6ms Detection time: 10 m s R efer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61). Arrangement 1a 1a1b 2a Contact material Gold ﬂash over silver alloy Initial contact resistance, max. (By voltage drop 6 V DC 1A) 30 m W Nominal switching capacity 8A 250 VAC 5A 30 VDC 5A 250 VAC 5A 30 VDC Rating (resistive) Max. switching power 2,000 VA 150 W 1,250 VA 150 W Max. switching voltage

250 V AC, 30 V DC

Max. switching current

8 A 5 A

life (min. operations) Mechanical (at 180 cpm) Electrical 10 Minimum operating power Single side stable 192 mW 2 coil latching 192 mW Nominal operating power Single side stable 300 mW 2 coil latching 300 mW Max. operating speed 30 cps. at rated load Initial insulation resistance* Min. 1,000 M W at 500 V DC Initial breakdown voltage* Between open contacts 1,000 Vrms Between contact sets 2,000 Vrms (1a1b, 2a) Between contacts and coil 3,000 Vrms Surge voltage between contacts and coil Min. 5,000 V Set time* (at nominal voltage) Max. 10 ms (Approx. 5 ms) Reset time* (at nominal voltage) Max. 10 ms (Approx. 4 ms) Operate time* (at nominal voltage) Max. 10 ms (Approx. 5 ms) Release time(without diode)* (at nominal voltage) Max. 5 ms (Approx. 4 ms) Temperature rise Max. 40 C (1a1b type) Max. 55 C (1a, 2a types) Soldering temperature 250 C (10 s) 300 C (5 s), 350 C (3 s) Shock resistance Functional* Min. 196 m/s {20 G} Destructive* Min. 980 m/s {100 G} Vibration resistance Functional* 117.6 m/s {12 G}, 10 to 55 Hz at double amplitude of 2 mm Destructive 205.8 m/s {21 G}, 10 to 55 Hz at double amplitude of 3.5 mm Conditions for operation, transport and storage* (Not freezing and condensing at low temperature) –40 C to +65 C – 40 F 149 F Unit weight Approx. 4.3 g .15 oz TYPICAL APPLICATIONS Ofﬁce and industrial electronic devices

Terminal devices of information process- ing equipment, such as printer, data re- corder.
Ofﬁce equipment (copier, facsimile)
Measuring instruments
NC machines, temperature controllers and programmable logic controllers.

ORDERING INFORMATION

Ex. DSP 1 L DC12V R Contact arrangement 1: 1a1b 1a: 1a 2a: 2a Operating function Nil: Single side stable L2: 2 coil latching Coil voltage DC: 3, 5, 6, 9, 12, 24 V Polarity Nil: Standard polarity R: Reverse polarity (Note) Standard packing–Carton: 50 pcs.; Case: 500 pcs. UL/CSA, VDE approved type is standard. mm inch

TYPES AND COIL DATA (at 20 C 68 Single side stable 2 coil latching Note: Insert 1a, 1 or 2a in, 2 q for contact form required. Type Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Nominal operating current, mA Nominal operating power, mW Coil resistance, W 10%) Max. allowable voltage, at 50 V DC Single side stable DSP q -DC3V 3 2.4 0.3 100 300 30 3.9 DSP q -DC5V 5 4.0 0.5 60 300 83 6.5 DSP q -DC6V 6 4.8 0.6 50 300 120 7.8 DSP q -DC9V 9 7.2 0.9 33.3 300 270 11.7 DSP q -DC12V 12 9.6 1.2 25 300 480 15.6 DSP q -DC24V 24 19.2 2.4 12.5 300 1,920 31.2 Type Part No. Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (max.) Nominal operating current, mA Nominal operating power, mW Coil resistance, W 10%) Max. allowable voltage, at 50 V DC 2 coil latching DSP q -L2-DC3V 3 2.4 2.4 100 300 30 3.9 DSP q -L2-DC5V 5 4.0 4.0 60 300 83 6.5 DSP q -L2-DC6V 6 4.8 4.8 50 300 120 7.8 DSP q -L2-DC9V 9 7.2 7.2 33.3 300 270 11.7 DSP q -L2-DC12V 12 9.6 9.6 25.5 300 480 15.6 DSP q -L2-DC24V 24 19.2 19.2 12.5 300 1,920 31.2 DIMENSIONS mm inch 1a type (DSP1a) Single side stable 1 coil latching 2 coil latching General tolerance: 0.3 .012 0.8 .031 0.8 .031 0.3 .012 10.0 .39410.5 .413 3.5 .138 1.0 .039 20.2 .795 7.62 .300 7.2 .283 1.21 .048 10.16 .400 0.8 .031 0.8 .031 0.3 .012 10.0 .39410.5 .413 3.5 .138 1.0 .039 1.0 .039 20.2 .795 7.62 .300 7.62 .300 7.2 .283 1.21 .048 2.54 .100 0.3 .012 11.0 .433 7.62 .300 PC board pattern (Copper-side view) Single side stable 2 coil latching Tolerance: 0.1 .004 2.54 .100 4-1.2 dia. 4-.047 dia. 2.54 .100 2.54 .100 6-1.2 dia. 6-.047 dia. 2.54 .100 Schematic (Bottom view) Single side stable (Deenergized condition) 2 coil latching (Reset condition) 8 1 5 8 1 5 2 1a1b type (DSP1) Single side stable 1 coil latching 2 coil latching General tolerance: 0.3 .012 0.8 .031 0.8 .031 0.3 .012 10.0 .39410.5 .413 3.5 .138 1.0 .039 20.2 .795 7.62 .300 7.2 .283 1.21 .048 10.16 .400 0.8 .031 0.8 .031 0.3 .012 10.0 .39410.5 .413 3.5 .138 1.0 .039 1.0 .039 20.2 .795 7.62 .300 7.62 .300 7.2 .283 1.21 .048 2.54 .100 0.3 .012 11.0 .433 7.62 .300 PC board pattern (Copper-side view) Single side stable 2 coil latching Tolerance: 0.1 .004 6-1.2 dia. 6-.047 dia. 2.54· 3 .100· 3 2.54· 3 .100· 3 2.54· 4 .100· 4 8-1.2 dia. 8-.047 dia. 2.54· 3 .100· 3 2.54· 3 .100· 3 2.54· 3 .100· 3 2.54 .100 Schematic (Bottom view) Single side stable (Deenergized condition) 2 coil latching (Reset condition) 8 1 91 2 91 2

2a type (DSP2a) Single side stable 1 coil latching 2 coil latching General tolerance: 0.3 .012 0.8 .031 0.8 .031 0.3 .012 10.0 .39410.5 .413 3.5 .138 1.0 .039 20.2 .795 7.62 .300 7.2 .283 1.21 .048 10.16 .400 0.8 .031 0.8 .031 0.3 .012 10.0 .39410.5 .413 3.5 .138 1.0 .039 1.0 .039 20.2 .795 7.62 .300 7.62 .300 7.2 .283 1.21 .048 2.54 .100 0.3 .012 11.0 .433 7.62 .300 PC board pattern (Copper-side view) Single side stable 2 coil latching Tolerance: 0.1 .004 6-1.2 dia. 6-.047 dia. 2.54· 3 .100· 3 2.54· 3 .100· 3 2.54· 4 .100· 4 8-1.2 dia. 8-.047 dia. 2.54· 3 .100· 3 2.54· 3 .100· 3 2.54· 3 .100· 3 2.54 .100 Schematic (Bottom view) Single side stable (Deenergized condition) 2 coil latching (Reset condition) 8 1 91 2 91 2 REFERENCE DATA 1. Max. switching capacity 2.-(1) Life curve (1a1b type) 2.-(2) Life curve (1a1b type) 1000 100 0 0.1 1 10 1a1b 2a 1a Current, A Voltage, V AC 100 01 2 4 37 65 Switching capacity, A No. of operations, ·10

265 V·130 V AC cosj = 1

265 V·130 V AC

cosj = 0.4 100 0.5 1 10 5 Switching capacity, A No. of operations, ·10

30 V DC L/R = 7 ms

30 V DC resistive

3.-(1) Coil temperature rise (1a type) Sample: DSP1a-DC12V, 5 pcs. 3.-(2) Coil temperature rise (1a1b type) Sample: DSP1-DC12V, 5 pcs. 3.-(3) Coil temperature rise (2a type) Sample: DSP2a-DC12V, 5 pcs. 0 80 100 120 Coil applied voltage, %V Coil temperature rise, °C 0 80 100 120 Coil applied voltage, %V Coil temperature rise, °C 0 80 100 120 Coil applied voltage, %V Coil temperature rise, °C 4.-(1) Operate & release time (without diode, 1a type) Sample: DSP1a-DC12V, 5 pcs. 4.-(2) Operate & release time (without diode, 1a1b type) Sample: DSP1-DC12V, 5 pcs. 4.-(3) Operate & release time (without diode, 2a type) Sample: DSP2a-DC12V, 5 pcs.) 80 100 120 Max. x Max. Min. Coil applied voltage, %V Operate & release time, ms x Min. Operate time Release time 80 100 1100 Max. Min. x xMax. Min. Coil applied voltage, %V Operate & release time, ms Operate time Release time 80 100 1200 Max. Min. x x Max. Min. Coil applied voltage, %V Operate & release time, ms Operate time Release time mm inch

4.-(4) Operate & release time (with diode, 1a type) Sample: DSP1a-DC12V, 5 pcs. 4.-(5) Operate & release time (with diode, 1a1b type) Sample: DSP1-DC12V, 5 pcs. 4.-(6) Operate & release time (with diode, 2a type) Sample: DSP2a-DC12V, 5 pcs. 80 100 1200 x Min. Max. Min. Coil applied voltage, %V Operate & release time, ms Operate time Release time Max. x 80 100 1100 Min. Max. Min. Max. x Coil applied voltage, %V Operate & release time, ms Operate time Release time x 80 100 1200 Max. xMin. Coil applied voltage, %V Operate & release time, ms Operate time Release time Max.Min. x 5.-(1) Change of pick-up and drop-out voltage (1a type) Sample: DSP1a-DC12V, 5 pcs. 5.-(2) Change of pick-up and drop-out voltage (1a1b type) Sample: DSP1-DC12V, 5 pcs. 5.-(3) Change of pick-up and drop-out voltage (2a type) Sample: DSP2a-DC12V, 5 pcs. –40 –20 0 20 40 60 80 –50 Ambient temperature, °C Pick-up voltage Drop-out voltage (%) Rate of change –40 –20 0 20 40 60 80 –50 Ambient temperature, °C Pick-up voltage Drop-out voltage (%) Rate of change –40 –20 0 20 40 –50 Ambient temperature, °C Pick-up voltage Drop-out voltage (%) Rate of change 60 80 6.-(1) Inﬂuence of adjacent mounting (1a type) Sample: DSP1a-DC12V, 5 pcs. 6.-(2) Inﬂuence of adjacent mounting (1a1b type) Sample: DSP1-DC12V, 5 pcs. 6.-(3) Inﬂuence of adjacent mounting (2a type) Sample: DSP2a-DC12V, 5 pcs. 1050 15Rate of change, % A, C relays are not energized A, C relays are energized ABC Pick-up voltage Drop-out voltage Inter-relay distance ( ), mm 123456 –10 10Rate of change, % A, C relays are not energized A, C relays are energized ABC Pick-up voltage Drop-out voltage Inter-relay distance ( ), mm 1050 15Rate of change, % A, C relays are not energized A, C relays are energized ABC Pick-up voltage Drop-out voltage Inter-relay distance ( ), mm NOTE Soldering should be done under the foll- wing conditions: 250°C 482°F within 10 s 300°C 572°F within 5 s 350°C 662°F within 3 s For Cautions for Use, see Relay Technical Information (Page 48 to 76). 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog

Item Speciﬁcations Breakdown voltage 3,000 Vrms between terminals (Except for the portion between coil terminals) Insulation resistance1,000 MW between terminals at 500 V Heat resistance 150 °C for 1 hour Max. continuous current 1a: 8 A 2a: 5 A TYPES AND APPLICABLE RELAYS Type No. Applicable relays For DSP1a For DSP1a, DSP1, DSP2a DSP1a-PS DSP1a-PSL2 DSP2a-PS DSP2a-PSL2 DSP1a relays OK OK OK OK DSP1a-L2 relays OK OK DSP1 relays OK OK DSP1-L2 relays OK DSP2a relays OK OK DSP2a-L2 relays OK DIMENSIONS mm inch 5.7– 0.3 .224–.012 17– 0.6 .669– .024 11– 0.6 .433– .024 23– 0.6 .906– .024 0.3– 0.1 .012– .004 7.62– 0.3 .300– .012 10.16– 0.3 .400– .012 0.8– 0.1 .026– .004 7.62– 0.3 .300– .012 2.54– 0.3 .100– .012 3.7 .146 2.61 .103 PC board pattern (Copper-side view) DSP1a-PS, DSP1a-PSL2 Terminal No.2 and 15 are for DSP1a-PSL2 only. DSP2a-PS, DSP2a-PSL2 Terminal No.2 and 15 are for DSP2a-PSL2 only. 15 16 2.54 .100 2.54 .100 1.2 dia. 047 dia. 15 16 129 2.54 .100 2.54 .100 1.2 dia. 047 dia. FIXING AND REMOVAL METHOD 1. Match the direction of relay and socket. 2. Both ends of relays are ﬁxed so surely that the socket hooks on the top surface of relays. 3. Remove the relay, applying force in the direction shown below. 4. In case there is not enough space for ﬁnger to pick relay up, use screw drivers in the way shown below. Good No good

Product Information

DSP1A-L2-DC6V specifications and overview.

Summary

MINIATURE POWER RELAY IN DS RELAY SERIES

Description

MINIATURE POWER RELAY IN DS RELAY SERIES

Source title DSP1A-L2-DC6V Datasheet(PDF) - Nais(Matsushita Electric Works)

Related Parts

More parts from the same family.

Browse manufacturer