DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

105265.R1 1/10 www.protekdevices.com LOW CAPACITANCE TVS ARRAY DSOT03C thru DSOT05C 05265

APPLICATIONS

✔ RS-232, RS-422 & RS-423 ✔ Cellular Phones ✔ Notebooks ✔ Control & Monitoring Systems ✔ Portable Electroincs ✔ Wireless Bus Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20 μs - Level 2(Line-Ground) & Level 3(Line-Line)

FEATURES

✔ ESD Protection > 40 kilovolts ✔ 100 Watts Peak Pulse Power per Line (tp = 8/20 μs) ✔ Low Clamping Voltage ✔ Available in 3V & 5V ✔ Bidirectional Configuration ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ DFN-3 Package ✔ Available in Lead-Free Nickel-Paladium-Gold Plating ✔ Solder Reflow Temperature: Nickel-Paladium-Gold (Ni/Pd/Au) - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Marking Code ✔ 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION DFN-6DFN-3 /MT49 /MT50 /MT51

205265.R1 1/10 www.protekdevices.com DSOT03C thru DSOT05C DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified Storage Temperature SYMBOL V ALUE °C-55 to 150 UNITS TSTG PARAMETER Operating Temperature TA -55 to 150 °C MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Peak Pulse Power (tp = 8/20μs) - See Figure 1 W100PPP Typical Forward Voltage @10mA, 300 μs - Square Wave (Note 1) V1.2VF PART NUMBER (See Note 1) DEVICE MARKING MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20μs VC @ IPP TYPICAL CAPACITANCE @0V, 1 MHz C pF DSOT03C DSOT05C 4.0 6.0 7.0 9.8 10.9V @ 10A 12.5V @ 2A MAXIMUM LEAKAGE CURRENT @VWM ID μA RATED STAND-OFF VOLTAGE VWM VOLTS 3.3 5.0

405265.R1 1/10 www.protekdevices.com DSOT03C thru DSOT05C DFN-3 PACKAGE OUTLINE & DIMENSIONS COPYRIGHT © ProT ek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility wit h respect to the selection or specifications of such products. ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com /MT84/MT111/MT112/MT32/MT99/MT111/MT118/MT101/MT114/MT32/MT116/MT97/MT112/MT101 /MT75/MT48 /MT116 /MT68 /MT80/MT48 /MT80/MT50 /MT49/MT48/MT32/MT80/MT105/MT116/MT99/MT104/MT101/MT115/MT32/MT67/MT117/MT109/MT117/MT108/MT97/MT116/MT105/MT118/MT101 /MT84/MT111/MT108/MT101/MT114/MT97/MT110/MT99/MT101/MT32/MT111/MT110/MT32/MT84/MT97/MT112/MT101/MT46/MT32/MT177/MT32/MT48/MT46/MT50 /MT65/MT48 /MT66/MT48 /MT80 /MT69 /MT70 /MT87 /MT85/MT115/MT101/MT114/MT32/MT68/MT105/MT114/MT101/MT99/MT116/MT105/MT111/MT110/MT32/MT111/MT102/MT32/MT70/MT101/MT101/MT100 /MT80/MT105/MT110/MT32/MT49 /MT73/MT110/MT100/MT105/MT99/MT97/MT116/MT101/MT100 /MT98/MT121/MT32/MT68/MT111/MT116 Tape & Reel Specifications (Dimensions in millimeters) DE P0 tmaxFP 2 W P 4.00 ±0.10 0.25 A0 B0 K0Reel Dia. Tape Width Outline & Dimensions: Rev 0 - 5/07, 06073 PACKAGE OUTLINE & MOUNTING PAD A B C D 1.14 0.025 0.457 1.14 0.610 0.610 0.30x0.178 0.787x0.432 0.965 0.610 DIM MILLIMETERS INCHES PACKAGE DIMENSIONS MIN MAX MIN MAX 1.24 0.076 0.559 1.24 0.711 0.711 0.406x0.279 0.889x0533 1.067 0.711 /MT65 /MT67/MT66 /MT76/MT52/MT49 /MT50 /MT51/MT76/MT49 /MT76/MT51 /MT76/MT50 /MT71/MT49 /MT71/MT50 /MT68 TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., DSOT05C-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., DSOT05C-T13. 4. Suffix - LF = Lead-Free, i.e., DSOT05C-LF-T7. NOTES 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling dimension in inches. 3. Pin 3 is the cathode (Unidirectional Only) 4. Dimensions are exclusive of mold flash and metal burrs. 0.049 0.003 0.022 0.049 0.028 0.028 0.016x0.011 0.035x0.021 0.042 0.028 0.045 0.001 0.018 0.045 0.024 0.024 0.012x0.007 0.031x0.017 0.038 0.024