DSK32 JUXING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

http://www.trr-jx.comversion: 02 Reverse Voltage - 20 to 200 V Forward Current - 3.0A

FEATURES

  • Metal silicon junction, majority carrier conduction
  • For surface mounted applications
  • Low power loss, high efficiency
  • High forward surge current capability
  • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications MECHANICAL DATA
  • Case: SOD-123FL
  • Terminals: Solderable per MIL-STD-750, Method 2026
  • Approx. Weight:15mg 0.00048oz PINNING PIN

DESCRIPTION

Marking Code: K32 - K320 Simplified outline SOD-123FL and symbol 1 2 Maximum DC Blocking Voltage Parameter Maximum Repetitive Peak Reverse Voltage Maximum RMS voltage Maximum Average Forward Rectified Current 1）Typical Junction Capacitance 20 40 V 14 28 V V 3.0 0.5 -55 ~ +125 A A V mA pF Units 20 40 Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Max Instantaneous Forward Voltage at 3 A Maximum DC Reverse Current at Rated DC Reverse Voltage Operating Junction Temperature Range T = 25°Ca T =100°Ca VRRM VRMS VDC IF(AV) IFSM VF IR Cj Tj Symbols TstgStorage Temperature Range 100 100 0.55 0.70 0.85 250 -55 ~ +150 °C 120 120 150 105 150 200 140 200 0.95 0.3 160 2） 40Typical Thermal Resistance RθJA °C/W 1） Measured at 1MHz and applied reverse voltage of 4 V D.C. 7080 70 84 DSK32 DSK34 DSK36 DSK38 DSK310 DSK312 DSK315 DSK320 Surface Mount Schottky Rectifiers DSK32 THRU DSK320 Ratings at 25 ambient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or inductive load, for capacitive load current derate by 20 %. Maximum Ratings and Electrical characteristics

http://www.trr-jx.comversion: 02 Fig.2 Typical Reverse Characteristics Instaneous Current ( μA)Reverse 20 40 60 800 T =25J °C T =100J °C Percent of Rated Peak Reverse Voltage（%） 100 100 101 102 103 104 T =75J °C Fig.4 Typical Junction Capacitance 0.1 Junction Capacitance ( pF) Reverse Voltage (V) 100 200 500 1001 T =25J °C 0.1 0 0.4 1.4 Fig.3 Typical Forward Characteristic Instaneous Forward Current (A) Instaneous Forward Voltage (V) 1.0 1.6 Fig.1 Forward Current Derating Curve 0.5 1.0 1.5 2.0 2.5 3.0 0.0 25 50 75 100 125 150 Average Forward Current (A) Ambient Temperature (°C) 0.01 100 100 Fig.6- Typical Transient Thermal Impedance Transient Thermal Impedance（ /W）°C t, Pulse Duration（sec） 0.1 1 10 200 10 100 Fig.5 Maximum Non-Repetitive Peak Forward Surage Current Peak A)Forward Surage Current ( Number of Cycles at 60Hz 8.3 ms Single Half Sine Wave (JEDEC Method) 100 Single phase half-wave 60 Hz resistive or inductive load 3.5 100LFM Characteristic Curves (T =25 ℃ unless otherwise noted) DS32W/DS34W DS36W-DS320W DSK32 /DSK34 DSK36 /DSK38 DSK310 /DSK312 DSK315 /DSK320 DS 36 -DS 320 DS 32K -DS 34K KK DS 32 - DS 38 DS 310 -DS 320 K K K K Surface Mount Schottky Rectifiers DSK32 THRU DSK320

http://www.trr-jx.comversion: 02 Marking Type number Marking code The recommended mounting pad size 2.0 (79) 1.2 (47) mm (mil)Unit： 1.2 (47) 1.2 (47) DSK32 K32 DSK34 K34 DSK36 K36 DSK38 K38 DSK 310 K310 DSK 312 K312 DSK 315 K315 DSK 320 K320 PACKAGE OUTLINE Plastic surface mounted package; 2 leads SOD-123FL A A C ∠ALL ROUND V AM e Bottom View HE ∠ALL ROUND E D E g pad pad Top View g Surface Mount Schottky Rectifiers DSK32 THRU DSK320 UNIT mm max min mil max min 51.2 39.4 7.9 4.7 114 102 150 138 A C D E HE ∠ 1.1 0.7 e 0.9 0.7 27.6 g