DSK12_V01 CHENDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Metal silicon junction,majority carrier conduction Low power loss,high efficiency Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 °C/10 seconds at terminals Reverse Voltage - 20 to 200 Volts Forward Current - 1.0 Ampere Mechanical Data Case: JEDEC SOD-123FL molded plastic body Terminals: Solderable per MIL-STD-750,Method

2026 Polarity: Color band denotes cathode end

Mounting Position: Any Weight : 0.0007 ounce, 0.02 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS DSK12 DSK14 DSK15 DSK16 DSK18 DSK110 DSK115 DSK120 UNITS Marking Code MDD K12 MDD K14 MDD K15 MDD K16 MDD K18 MDD K110 MDD K115 MDD K120 Maximum repetitive peak reverse voltage V RMM 20 40 50 60 80 100 150 200 V Maximum RMS voltage V RMS 14 28 35 42 56 70 105 140 V Maximum DC blocking voltage V DC 20 40 50 60 80 100 150 200 V Maximum average forward rectified current at TL(see fig.1) I (AV) 1.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) I FSM A Maximum instantaneous forward voltage at 1.0A V F 0.55 0.70 0.85 0.90 V Maximum DCreverse current T A =25 at rated DCblocking voltage T A =125 I R 0.3 0.2 0.1 mA10.0 5.0 2.0 Typical junction capacitance (NOTE 1) C J 110 80 pF Typical thermal resistance (NOTE 2) R JA 100.0 W Operating junction temperature range T J -55 to +125 Storage temperature range T STG -55 to +150 Note: 3.The typical data above is for reference only. Dimensions in inches and (millimeters) SOD-123FL 0.154(3.90) 0.141(3.60) 0.035(0.90) 0.028(0.70) 0.008(0.20) 0.005(0.12) 0.043(1.10) 0.035(0.90) 0.114(2.90) 0.102(2.60) 0.031 (0.08) 0.043 (1.10) 0.075(1.90) 0.067(1.70)

Rev:2019A0 Page :2 Typical Characterisitics The curve above is for reference only. https://www.microdiode.com DSK12 THRU DSK120 Reverse Voltage - 20 to 200 Volts Forward Current - 1.0 Ampere Fig.1 Forward Current Derating Curve 0.2 0.4 0.6 0.8 1.0 1.2 0.0 25 50 75 100 125 150 Average Forward Current (A) Single phase half-wave 60 Hz resistive or inductive load 0.01 100 100 Fig.6- Typical Transient Thermal Impedance /Transient Thermal Impedance（ W）°C t, Pulse Duration（sec） 0.1 1 10 1000 Fig.2 Typical Reverse Characteristics Instaneous Reverse Current ( μA) 20 40 60 800 TJ=25°C TJ=100°C Percent of Rated Peak Reverse Voltage（%） 100 10 0 101 10 2 10 3 10 4 Fig.4 Typical Junction Capacitance 0.1 Junction Capacitance (pF) Reverse Voltage (V) 100 200 500 1001 DSK12/DSK14 DSK16-DSK120 TJ=25°C 0.1 0 0.4 1.4 Fig.3 Typical Forward Characteristic Instaneous Forward Current (A) Instaneous Forward Voltage (V) 1.0 DSK12/DSK14 DSK16/DSK18 DSK110/DSK112 DSK115/DSK120 Case Temperature (°C) 100 Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles at 60Hz 8.3 ms Single Half Sine Wave (JEDEC Method)

https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing DSK12 THRU DSK120 Reverse Voltage - 20 to 200 Volts Forward Current - 1.0 Ampere Item Tolerance SOD-123FL Carrier width Carrier length Carrier depth Sprocket hole 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Reel width W1 Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1.55 178.00 50.0 13.00 1.75 3.50 4.00 4.00 2.00 0.25 8.15 10.5 2.1 4.0 1.60 SOD-123FL 7" 3,000 4.0 45,000 210* 208* 203 178 430*430*235 180,000 9.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) 0.079 0.173 Symbol Unit (mm) A C D 0.047 4.4 E B Unit (inch) 0.126 1.2 0.0471.2 3.2