10S4P LITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
www.LiTechPower.com E-mail: info@LiTechPower.com LiTech Power Co.,Ltd LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com Specifications and data are subject to change without notice. Contact LiTech Power for latest information. Copyright © LiTech Power Co.,Ltd. All Rights Reserved. Documents No. Edition No. Approved By Sheets DSE-A-1214-01 V.0 Eng. Liu XY (06/11/17) 5 Specification of LiTech Power Li-ion 10S4P 12Ah Flexible Battery Pack Model No.: Flexible Battery PACK 10S4P 1 of 6 Specification of LiTech Power Li-ion 10S4P 12Ah Flexible Battery Pack Model No.: Flexible Battery PACK 10S4P Documents No. Edition No. Edition No. Edition No. Edition No. Approved By Approved By Approved By Approved By Sheets DSE-A-1214-01 V.0 V.0 V.0 Eng. Liu XY Eng. Liu XY (06/11/17) (06/11/17) (06/11/17) A ll datasheet.com
www.LiTechPower.com E-mail: info@LiTechPower.com LiTech Power Co.,Ltd LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com Specifications and data are subject to change without notice. Contact LiTech Power for latest information. Copyright © LiTech Power Co.,Ltd. All Rights Reserved. 1. General 2. Battery Pack basic characteristics
2.1 Capacity
2.2 Nominal Voltage
Nominal Capacity: 12Ah Minimum Capacity: 11.85Ah 37V ≤ 450mΩ 24.00V 42.50V 10.0A 60A 90A for 50mS
2.3 Internal impedance
2.4 Discharge Cut-off Voltage
2.5 Max Charge Voltage
2.6 Max. Continuous Charge Current 2.7 Max. Continuous Discharge Current 2.8 Max. Discharge Peak Current
2.9 Cycle Life
All protections adopted, please check Specs. of the BMS as below 441g ± 4g 455 x 141 x 24 mm (L*W*T) Charge Discharge Within 1 month Within 6 months 0℃ ~ 45℃ -20℃ ~ 60℃ -5℃ ~ 35℃ 0℃ ~ 35℃
2.10 Protections
2.12 Max. Dimension
2.11 Weight
2.13 Operating Temperature
2.14 Storage Temperature
Flexible Battery Pack is an 10S4P Lithium-Ion rechargeable Battery Pack with Battery Management System integrated, normal voltage at 37V, rated capacity at 12Ah. Battery pack mounts on the flexible PCB, main BMS is connected externally. * Battery Cell: SAMSUNG 18650 30Q * BMS: BesTech Power HCX-D596 / D141 ≥ 800 cycles After 800 cycles in 100% DOD charge and discharge at rated current, the residual discharge capacity is above 60% of nominal capacity 2 of 6 A ll datasheet.com
www.LiTechPower.com E-mail: info@LiTechPower.com LiTech Power Co.,Ltd LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com Specifications and data are subject to change without notice. Contact LiTech Power for latest information. Copyright © LiTech Power Co.,Ltd. All Rights Reserved. 3. D596 BMS Parameters 4. Battery Pack Construction 3 of 6 Item Content Criterion over charge protection voltage over charge recovery voltage over charge protection delay time over discharge protection voltage over discharge recovery voltage over discharge protection delay time over current protection current short protection delay time static self-consumption current E-Switch Temperature Switch / NTC Passive Balancing PCB internal resistance 4.25V ± 25mV 4.08V ± 50mV 80ms - 120ms 2.4V ± 50mV 2.3V ± 100mV 40ms-100ms 180-200A 10ms - 20ms I < 6.0uA R < 65mΩ 126mA±15mA @ 4.20V±0.025V YES LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com 4. Battery Pack Construction E-Switch Temperature Switch / NTC Passive Balancing PCB internal resistance R < 65mΩ 126mA±15mA @ 4.20V±0.025V YES A ll datasheet.com
www.LiTechPower.com E-mail: info@LiTechPower.com LiTech Power Co.,Ltd LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com Specifications and data are subject to change without notice. Contact LiTech Power for latest information. Copyright © LiTech Power Co.,Ltd. All Rights Reserved. 4. Flexibility 4 of 6 4. Flexibility LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China A ll datasheet.com
www.LiTechPower.com E-mail: info@LiTechPower.com LiTech Power Co.,Ltd LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com Specifications and data are subject to change without notice. Contact LiTech Power for latest information. Copyright © LiTech Power Co.,Ltd. All Rights Reserved. 5. Standard test conditions
5.1 Standard Charge:
Constant Current and Constant Voltage (CC/CV) Current = 10A End-up Voltage = 42.5V End Current = 20mA Constant Current (CC) Current = 60A End Voltage = 24V
5.2 Standard Discharge:
- Transportation Transport classification: UN Class: 9 Class | UN number: UN3480 For more information, call +86 769 8203 3052 Any tests are to be conducted with new batteries that have not been cycled more than five times in one month before the test. Unless otherwise defined, test and measurements done under a temperature of 20 ± 5°C and relative humidity of 45~85%. If it is judged that the test results are not affected by such conditions, the tests may be conducted at Ambient Temperature: 25 ± 5°C; Relative Humidity: 65 ± 20%. The rated energy of the accumulator is more than 100Wh, therefore you could transport them by road, by railway and by sea, if by air but special handling needed,. BUT Violent shaking, bumping, rain and flaring sun shall be forbidden during the transportation. Keep the battery less than 30% charged according to IATA shipping regulations. 5 of 6 UN3480 A ll datasheet.com
www.LiTechPower.com E-mail: info@LiTechPower.com LiTech Power Co.,Ltd LiTech Power Co., Ltd Factory Dongguan: 4F, Bldg B, RuiXin HengYe Industrial Park, TaiXing Rd # 18A, ShiGu District, TangXia Town, DongGuan, China Factory Shenzhen: 3F, Bldg 3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China Tele: +86 769 8203 3052 | Fax: +86 769 82033050 www.LiTechPower.com | info@LiTechPower.com Specifications and data are subject to change without notice. Contact LiTech Power for latest information. Copyright © LiTech Power Co.,Ltd. All Rights Reserved. 7. Storage 10. Caution * Do NOT weld the battery directly, do not disassembly the battery. 8. Warranty Please keep the pack in the cool and dry environment: Within 1 month -5°C~35°C or Within 6 months 0°C~35°CđRelative humidity ≤75%, don’t keep the packs fully charged. All LiTech Power products are covered by a one year limited warranty. The warranty covers premature failure due to defects in materials and / or workmanship. Any breakage caused by accidental damage or as a result of abuse or misuse is not covered. The warranty is limited to the original purchaser and is not transferable. The warranty is void if the serial number is removed from the product or if the battery has been modified in any way. Please charge your battery directly after each use. Leaving your battery in discharged state will seriously and permanently damage its performance. Please note we cannot upheld warranty claims in these circumstances. Your battery will degrade over time and with use, such degradation is not covered by warranty. The information in this specification subject to change without prior notice. The information contained in this document is for reference only and should not be used as a basis for product guarantee or warranty. For applications other than those described here, please consult LiTech Power directly. * Please read the specification carefully before testing or using the battery, as improper handling of Lithium-ion battery may result in loss of efficiency, heating ignition, electrolyte leakage or even explosion. * Do NOT get the battery wet or throw the battery into water. When not use, it should be placed in the dry and low tempera- ture environment. * While using, testing or preserving the battery, if you find the battery become hot, distribute smell , change color, deform or any other abnormality, please stop using or testing immediately, and attempt to isolate and keep away from the battery. * If the battery leaks, the electrolyte gets into the eyes, do not rub eyes, instead, rinse the eyes with plenty of water, and seek medical service. If the electrolyte gets onto the skin or clothe, wash it with plenty of water immediately. * While testing the battery of charging and discharging, please use the testing equipment special for Li-ion battery. Do NOT use the ordinary source of constant current and constant voltage, which fails to restrict charge and discharge to battery in order to prevent the battery from being overcharged and over-discharged, triggering battery malfunction or explosion. * When charging and discharging to the battery or packing it into the equipment, do NOT reverse the terminals of cathode and anode or it will make the battery overcharging and over-discharging, causing the battery to lose efficiency seriously and even explode. * Do NOT put the battery together with such metal products as necklace, hairpin, coin or screw in the pocket or in the bag; neither store them together. Do NOT connect the positive and negative electrode directly with such conductive materials as metal, or it may make the battery short-circuit. * Do NOT beat, throw or trample the battery. Do NOT put the battery into the washing machine or the high-pressure container. * Do NOT put the battery close to heat source, for instance, fire, heater etc. Do NOT use the battery under the circum- stance of burning sun or the temperature exceeding 60°C, or it may cause the battery to generate heat, heating ignition and loss of efficiency. 9. Notice 6 of 6 A ll datasheet.com