DSC WELWYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Power @70°C Watts 0.33 0.75 1.5 2 second overload power @25°C Watts 2.1 4.7 9.4 Short pulse performance See graphs Resistance range Ohms 1R0 to 4M7 Tolerance % 10R to 1M: 0.5, All values: 1, 5 LEV Volts 200 400 500 TCR ppm/°C <10R:200 >10R:100 Operating temperature °C -55 to +155 Dielectric withstand voltage Volts 500 Thermal Impedance °C/W 160 80 50 Pad & trace area for rated power* mm 2 50 60 100 Values E24 or 96 preferred - other values to special order Double-Sided Chip Resistors DSC Series

  • Two parallel resistance elements in a single chip
  • Excellent pulse withstand performance
  • Laser trimmed up to 0.5% tolerance
  • Enhanced working voltage
  • Enhanced power rating
  • Pb-free terminations General Note Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn’s own data and is considered accurate at time of going to print. © Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Electrical Data Issue B · 01.06 A subsidiary of TT electronics plc Welwyn Components Dimensions (mm) & Weight (g) L W T max A B min C Wt. Physical Data *Recommended minimum pad & adjacent trace area for each termination for rated power dissipation on FR4 PCB Construction Thick film resistor material, overglaze and organic protection are screen printed on a 96% alumina substrate. Wrap-around termi nations have an electroplated nickel barrier and Pb-free solderable coating, this ensures excellent ‘leach’ resistance properties and solderability. Marking Components are not marked. Reels are marked with type, value, tolerance, date code and quantity. Solvent Resistance The body protection is resistant to all normal industrial cleaning solvents suitable for printed circuits. T WA A B L Wrap-around terminations (3 faces) C

© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Issue B · 01.06 Welwyn Components Maximum Typical Load at rated power: 1000 hours at 70°C ∆R% 1 0.25 Derating from rated power at 70°C Zero at 155°C Overload: 6.25 x rated power for 2 seconds ∆R% 1 0.1 Shelf life test: 12 months at room temperature ∆R% 0.1 0.02 Dry heat: 1000 hours at 155°C ∆R% 1 0.2 Long term damp heat ∆R% 1 0.25 Temperature rapid change ∆R% 0.25 0.05 Resistance to solder heat ∆R% 0.25 0.05 Performance Data Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms. Pulse Performance Data Lightning Surge Resistors have been tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. Also, the 2512 size has been tested to the Bellcore GR1089 2/10µs and 10/1000µs pulse shapes. The limit of acceptance is a shift in resistance of less than 1% from the initial value. 10,000 1,000 100 1 10 100 1,000 10,000 100,000 1,000,000 10,000,000 1.2/50µs Lightning Surge Value (Ohms) Peak Voltage (V) 1206 2010 2512 1206 2010 2512 10,000 1,000 100 10 100 1,000 10,000 100,000 1,000,000 10,000,000 10/700µs Lightning Surge Value (Ohms) Peak Voltage (V)

© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Issue B · 01.06 Welwyn Components Single Pulse The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. Continuous Load Due to Repetitive Pulses The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. 2/10us 10/1000us 10,000 1,000 100 1 10 100 1,000 10,000 100,000 1,000,000 10,000,000 DSC2512 - Bellcore GR1089 Lightning Surge Value (Ohms) Peak Voltage (V) 1206 2010 2512 1,000 100 0.0001 0.001 0.01 0.1 1 Single Pulse Pulse Duration (s) Peak Power (W) 1206 2010 2512 1,000 100 0.0001 0.001 0.01 0.1 1 Continuous Pulses Pulse Duration (s) Peak Power (W)

© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Issue B · 01.06 Welwyn Components Thermal Performance Data Ambient Temperature/°C % of Rated Power 125 100 -15 70 155 Temperature Derating Curve Power Dissipation/W Temperature Rise/°C 80 0 0.5 1 1.5 Temperature Rise Curves 1206 2010 2512 Packaging 1206 DSC series resistors are supplied on 8mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 3000. 2010 and 2512 DSC series resistors are supplied on 12mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 2010 : 3000pcs; 2512 : 1800pcs. Reels of 1000pcs are available on request. 2.5 ± 0.5 13 ± 0.5 33 ± 1.0Marking (Both sides) 0.8 ± 0.15 80 ± 2 178 ± 2 Wr GF W E T Tape and reel dimensions (mm) W P1 P0 P2 D0 D1 E F A0 B0 K0 T T1 T2

Type DSC 2512 - 10K F T 1 8 Size Value (use IEC62 code) Tolerance (use IEC62 code) Packing D 0.5% F1 % J5 % Tape 1206 or 2010 3000/reel Standard T18 2512 1800/reel Ordering Procedure Double Sided Chip Resistors DSC Series © Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Issue B · 01.06 Welwyn Components Application Notes DSC resistors are ideally suited for handling by automatic methods due to their rectangular shape and the small dimensional tolerances. Electrical connection to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminations. Wrap-around terminations provide good leach properties and ensure reliable contact. Due to the robust construction, the DSC can be immersed in the solder bath for 30 seconds at 260°C. This enables the resistor to be mounted on one side Specify type reference etc as shown in this example of DSC2512 10K ohms 1%. of a printed circuit board and wire-leaded components applied on the other side. DSC is compatible with typical Pb-free soldering materials and temperature profiles DSC resistors themselves can operate at a maximum temperature of 155°C. For soldered resistors, the joint temperature should not exceed 110°C. This condition is met when the stated power levels at 70 °C and recommended pad and trace areas are used. Allowance should be made if smaller areas of copper are used.