DS96F173MJ/883

DS96F173C NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Features

n Meets EIA-485, EIA-422A, EIA-423A standards n Designed for multipoint bus applications n TRI-STATE outputs n Common mode input voltage range: −7V to +12V n Operates from single +5.0V supply n Reduced power consumption (ICC = 50 mA max) n Input sensitivity of±200 mV over common mode range n Input hysteresis of 50 mV typical n High input impedance n Military temperature range available n Qualified for MIL STD 883C n Available to standard military drawings (SMD) n Available in DIP(J), LCC(E), and FlatPak (W) packages n DS96F173 and DS96F175 are lead and function compatible with SN75173/175 or the AM26LS32/MC3486 Logic Diagrams Function Tables (Each Receiver) DS96F173 Differential Inputs Enable Output A–B E E Y VID ≥ 0.2V H X H XL H VID ≤ −0.2V H X L XL L XL X Z XX H Z H = High Level L = Low Level Z = High Impedance (off) X = Don’t Care (Each Receiver) DS96F175 Differential Inputs Enable Output A–B E Y VID ≥ 0.2V H H VID ≤ −0.2V H L XL Z TRI-STATE® is a registered trademark of National Semiconductor Corporation. DS009627-10 DS96F175 DS009627-11 May 1998 DS96F173C/DS96F173M/DS96F175C/DS96F175M EIA-485/EIA-422 Quad Differential Receivers © 1998 National Semiconductor Corporation DS009627 www.national.com

Absolute Maximum Ratings(Note 2) Specifications for the 883 version of this product are listed separately. Storage Temperature Range (TSTG ) −65˚C to +175˚C Lead Temperature (Soldering, 60 sec.) 300˚C Max. Package Power Dissipation (Note 1) at 25˚C Ceramic DIP (J) 1500 mW Supply Voltage 7.0V Input Voltage, A or B Inputs ±25V Differential Input Voltage ±25V Enable Input Voltage 7.0V Low Level Output Current 50 mA Recommended Operating Conditions Min Typ Max Units Supply Voltage (VCC ) DS96F173C/DS96F175C 4.75 5.0 5.25 V Common Mode Input Voltage (VCM ) −7 +12 V Differential Input Voltage (VID) |12| V Output Current HIGH (IOH ) −400 µA Output Current LOW (IOL )1 1 m A Operating Temperature (TA) DS96F173C/DS96F175C 0 25 70 ˚C Note 1:Derate package 10 mW/˚C above 25˚C. Electrical Characteristics(Notes 3, 4) Over recommended supply voltage and operating temperature ranges, unless otherwise specified Symbol Parameter Conditions Min Typ Max Units VTH Differential-Input V O =V OH 0.2 V High Threshold Voltage VTL Differential-Input (Note 5) V O =V OL −0.2 V Low Threshold Voltage VTH −V TL Hysteresis (Note 6) V CM =0 V 5 0 m V VIH Enable Input Voltage HIGH 2.0 V VIL Enable Input Voltage LOW 0.8 V VIC Enable Input Clamp Voltage I I = −18 mA −1.5 V VOH Output Voltage HIGH V ID = 200 mV 0˚C to +70˚C 2.8 V IOH = −400 µA −55˚C to +125˚C 2.5 VOL Output Voltage LOW V ID = −200 mV I OL = 8.0 mA 0.45 V IOL = 11 mA 0.50 IOZ High-Impedance State Output V O = 0.4V to 2.4V ±20 µA II Line Input Current (Note 7) Other Input = 0V V I = 12V 1.0 mA VI = −7.0V −0.8 IIH Enable Input Current HIGH V IH = 2.7V 20 µA IIL Enable Input Current LOW V IL = 0.4V −100 µA R I Input Resistance 14 18 22 k Ω IOS Short Circuit Output Current (Note 8) −15 −85 mA ICC Supply Current No Load Outputs Enabled 50 mA ICCX Outputs Disabled 50 COMMERCIAL Switching Characteristics VCC = 5.0V, TA = 25˚C Symbol Parameter Conditions Min Typ Max Units tPLH Propagation Delay Time, V ID = −2.5V to +2.5V, 5.0 15 22 ns Low to High Level Output C L =1 5p F ,Figure 1 tPHL Propagation Delay Time, V CM = 0V 5.0 15 22 ns High to Low Level Output tZH Output Enable Time to High Level C L =1 5p F ,Figure 2 12 16 ns tZL Output Enable Time to Low Level C L =1 5p F ,Figure 3 13 18 ns tHZ Output Disable Time from High Level C L = 5.0 pF,Figure 2 14 20 ns www.national.com 2

Switching Characteristics(Continued) VCC = 5.0V, TA = 25˚C Symbol Parameter Conditions Min Typ Max Units tLZ Output Disable Time from Low Level C L = 5.0 pF,Figure 3 14 18 ns |tPLH –tPHL | Pulse Width Distortion (SKEW) Figure 1 1.0 3.0 ns Note 2:“Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation. Note 3:Unless otherwise specified min/max limits apply across the 0˚C to +70˚C range for the DS96F173C/DS96F175C. All typicals are given for VCC = 5V and TA = 25˚C. Note 4:All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwisespecified. Note 5:The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common mode input voltage and threshold voltage levels only. Note 6:Hysteresis is the difference between the positive-going input threshold voltage. VTH , and the negative going input threshold voltage, VTL. Note 7:Refer to EIA-485 Standard for exact conditions. Note 8:Only one output at a time should be shorted. Order Number: DS96F173CJ DS96F175CJ See NS Package Number J16A www.national.com3

Absolute Maximum Ratings(Note 2) For complete Military Specifications, refer to the appro- priate SMD or MDS. Storage Temperature Range (TSTG ) −65˚C to +175˚C Lead Temperature (Soldering, 60 sec.) 300˚C Max. Package Power Dissipation (Note 9) at 25˚C Ceramic DIP (J) 1500 mW Ceramic Flatpak (W) 1034 mW Ceramic LCC (E) 1500 mW Supply Voltage 7.0V Input Voltage, A or B Inputs ±25V Differential Input Voltage ±25V Enable Input Voltage 7.0V Low Level Output Current 50 mA Recommended Operating Conditions Min Typ Max Units Supply Voltage (VCC ) DS96F173M/DS96F175M 4.50 5.0 5.50 V Common Mode Input Voltage (VCM ) −7 +12 V Differential Input Voltage (VID) |12| V Output Current HIGH (IOH ) −400 µA Output Current LOW (IOL )1 1 m A Operating Temperature (TA) DS96F173M/DS96F175M −55 25 125 ˚C Note 9:Above T A = 25˚C derate J package 10 mW/˚C, W package 6.90 mW/˚C, E package 11.11 mW/˚C. Electrical Characteristics(Notes 3, 4) Over recommended supply voltage and operating temperature ranges, unless otherwise specified Symbol Parameter Conditions Min Max Units VTH Differential-Input High Threshold Voltage VCC = 4.5V, 5.5V VCM = 0V, 12V, −12V 0.2 V VTL Differential-Input (Note 5) Low Threshold Voltage VCC = 4.5V, 5.5V VCM = 0V, 12V, −12V −0.2 V VIH Enable Input Voltage HIGH 2.0 V VIL Enable Input Voltage LOW 0.8 V VIC Enable Input Clamp Voltage I I = −18 mA, VCC = 4.5V −1.5 V VOH Output Voltage HIGH V ID = 200 mV IOH = −400 µA −55˚C to +125˚C 2.5 V VOL Output Voltage LOW V ID = −200 mV I OL = 8.0 mA 0.45 V IOZ High-Impedance State Output V O = 0.4V, 2.4V, VCC = 5.5V ±20 µA II Line Input Current (Note 7) Other Input = 0V V I = 12V 1.0 mAVI = −7.0V −0.8 IIH Enable Input Current HIGH V IH = 2.7V, VCC = 5.5V 20 µA IIL Enable Input Current LOW V IL = 0.4V, VCC = 5.5V −100 µA R I Input Resistance 10 k Ω IOS Short Circuit Output Current (Note 8) −15 −85 mA ICC Supply Current No Load Outputs Enabled or Disabled 50 mAICCX MIL-STD-883C Switching Characteristics VCC = 5.0V Symbol Parameter Conditions T A = 25˚C T A = −55˚C T A = 125˚C Units Typ Max Max Max tPLH Propagation Delay Time, V ID = −2.5V to +2.5V, 15 22 30 30 ns Low to High Level Output C L =1 5p F ,Figure 1 tPHL Propagation Delay Time, V CM =0 V 1 5 2 2 3 0 3 0 n s High to Low Level Output tZH Output Enable Time to High Level C L =1 5p F ,Figure 2 12 16 27 27 ns www.national.com 4

Switching Characteristics(Continued) VCC = 5.0V Symbol Parameter Conditions T A = 25˚C T A = −55˚C T A = 125˚C Units Typ Max Max Max tZL Output Enable Time to Low Level C L =1 5p F ,Figure 3 13 18 27 27 ns tHZ Output Disable Time from High Level C L = 5.0 pF,Figure 2(Note 15) 14 20 27 27 ns C L =2 0p F ,Figure 2(Note 15) 14 30 37 37 ns tLZ Output Disable Time from Low Level C L = 5.0 pF,Figure 3 14 18 30 30 ns |tPLH –tPHL | Pulse Width Distortion (SKEW)Figure 1 1 3 5.0 5.0 ns SMD Number: DS96F173MJ 5962-9076602 MEA DS96F173MW 5962-9076602 MFA DS96F173ME 5962-9076602 M2A DS96F175MJ 5962-9076601 MEA DS96F175MW 5962-9076601 MFA DS96F175ME 5962-9076601 M2A Order Number: 883 Marking SMD Marking DS96F173MJ/883 DS96F173MJ-SMD DS96F175MJ/883 DS96F175MJ-SMD See NS Package Number J16A DS96F173ME/883 DS96F173ME-SMD DS96F175ME/883 DS96F175ME-SMD See NS Package Number E20A DS96F173MW/883 DS96F173MW-SMD DS96F175MW/883 DS96F175MW-SMD See NS Package Number W16A For complete Military Product Specifications, refer to the appropriate SMD or MDS. www.national.com5

16-Lead Ceramic Dual-In-Line Package DS96F173 DS009627-1 Top View DS96F175 DS009627-2 Top View 20-Lead Ceramic Leadless Chip Carrier DS009627-12 *NC — No Connection Top View DS009627-13 Top View www.national.com 6

Physical Dimensionsinches (millimeters) unless otherwise noted 20-Lead Ceramic Leadless Chip Carrier (E) Order Number DS96F173ME/883 or DS96F175ME/883 16-Lead Ceramic Dual-In-Line Package (J) Order Number DS96F173CJ, DS96F175CJ, DS96F173MJ/883 or DS96F175MJ/883 www.national.com9

Physical Dimensionsinches (millimeters) unless otherwise noted (Continued) LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or sys- tems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose fail- ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 16-Lead Ceramic FlatPak (W) Order Number DS96F173MW/883 or DS96F175MW/883 DS96F173C/DS96F173M/DS96F175C/DS96F175M EIA-485/EIA-422 Quad Differential Receivers National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.