DS9636A

DS9636A NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

n Programmable slew rate limiting n Meets EIA Standard RS-423 n Commercial or extended temperature range n Output short circuit protection n TTL and CMOS compatible inputs Connection Diagram 8-Lead DIP DS009620-1 Top View Order Number DS9636ACN, See NS Package Number N08E For Complete Military Product Specifications, refer to the appropriate SMD or MDS. Order Number DS9636AJ/883 See NS Package Number J08A May 1998 DS9636A RS-423 Dual Programmable Slew Rate Line Driver © 1998 National Semiconductor Corporation DS009620 www.national.com

Absolute Maximum Ratings(Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Storage Temperature Range Ceramic DIP −65˚C to +175˚C Molded DIP −65˚C to +150˚C Lead Temperature Ceramic DIP (Soldering, 60 seconds) 300˚C Molded DIP (Soldering, 10 seconds) 265˚C Maximum Power Dissipation * at 25˚C (Note 5) Cavity Package 1560 mW Molded Package 1300 mW V+ Lead Potential to Ground Lead V− to +15V V− Lead Potential to Ground Lead +0.5V to −15V V+ Lead Potential to V− Lead 0V to +30V Output Potential to Ground Lead ±15V Output Source Current −150 mA Output Sink Current 150 mA Recommended Operating Conditions Characteristics DS9636AM DS9636AC Units Min Typ Max Min Typ Max Positive Supply Voltage (V+) 10.8 12 13.2 10.8 12 13.2 V Negative Supply Voltage (V−) −13.2 −12 −10.8 −13.2 −12 −10.8 V Operating Temperature (T A) −55 25 125 0 25 70 ˚C Wave Shaping Resistance (RWS ) 10 500 10 1000 k Ω Electrical Characteristics(Notes 2, 3) Over recommended operating temperature, supply voltage and wave shaping resistance ranges unless otherwise specified Symbol Parameter Conditions Min Typ Max Units VOH1 Output Voltage HIGH R L to GND (RL = ∞ ) 5.0 5.6 6.0 V VOH2 R L to GND (RL = 3.0 kΩ ) 5.0 5.6 6.0 V VOH3 R L to GND (RL = 450Ω ) 4.0 5.5 6.0 V VOL1 Output Voltage LOW R L to GND (RL = ∞ ) −6.0 −5.7 −5.0 V VOL2 R L to GND (RL = 3.0 kΩ ) −6.0 −5.6 −5.0 V VOL3 R L to GND (RL = 450Ω ) −6.0 −5.4 −4.0 V R O Output Resistance 450 Ω≤ R L 25 50 Ω IOS+ Output Short Circuit Current (Note 4) VO = 0V, VI = 0V −150 −60 −15 mA IOS− VO = 0V, VI = 2.0V 15 60 150 mA ICEX Output Leakage Current V O = ±6.0V, Power-Off −100 +100 µA VIH Input Voltage HIGH 2.0 V VIL Input Voltage LOW 0.8 V VIC Input Clamp Diode Voltage I I = 15 mA −1.5 −1.1 V IIL Input Current LOW V I = 0.4V −80 −16 V IIH Input Current HIGH V I = 2.4V 1.0 10 µA VI = 5.5V 10 100 I+ Positive Supply Current V CC = ±12V, RL = ∞ ,1 3 1 8 m A R WS = 100 kΩ ,V I = 0V I− Negative Supply Current V CC = ±12V, RL = ∞ , −18 −13 mA R WS = 100 kΩ ,V I = 0V Note 1:“Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation. Note 2: Unless otherwise specified Min/Max limits apply across the −55˚C to +125˚C temperature range for the DS9636AM and across the 0˚C to +70˚C range for the DS9636AC. All typicals are given for VCC = 5V and TA = 25˚C. Note 3:All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwisespecified. Note 4:Only one output at a time should be shorted. Note 5:Ratings apply to ambient temperature at 25˚C. Above this temperature, derate J and N packages 10.4 mW/˚C. www.national.com 2

FIGURE 1. AC Test Circuit and Waveforms

FIGURE 2. RS-423 System Application

Physical Dimensionsinches (millimeters) unless otherwise noted Ceramic Dual-In-Line Package (J) Order Number DS9636AJ/883 Molded Dual-In-Line Package (N) Order Number DS9636ACN www.national.com5

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or sys- tems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose fail- ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 DS9636A RS-423 Dual Programmable Slew Rate Line Driver National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.