DS8921_15 TI1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

0.1 µF 5.0 V RI+ RI- RO DO+ DO- DI Product Folder Sample & Buy T echnical Documents Tools & Software Support & Community DS8921,DS8921A,DS8921AT SNLS374D – MAY 1998–REVISED JANUARY 2015 DS8921xDifferentialLineDriverandReceiverPair

1 Features 3 Description

The DS8921, DS8921A, and DS8921AT devices are 1• 12-ns Typical Propagation Delay differential line driver and receiver pairs designed• Output Skew: 0.5 ns Typical specifically for applications meeting the ST506,

  • Meets the Requirements of EIA Standard RS-422 ST412, and ESDI disk drive standards. In addition, these devices meet the requirements of the EIA• Complementary Driver Outputs standard RS-422.• High Differential or Common-Mode Input Voltage Ranges of ±7 V The DS8921x receivers offer an input sensitivity of 200 mV over a ±7 V common mode operating range.• ±0.2 V Receiver Sensitivity Over the Input Voltage Hysteresis is incorporated (typically 70 mV) toRange improve noise margin for slowly changing input• Receiver Input Hysteresis: 70 mV Typical waveforms.
  • DS8921AT Industrial Temperature Operation: The DS8921x drivers are designed to provide(−40°C to +85°C) unipolar differential drive to twisted-pair or parallel wire transmission lines. Complementary outputs are2 Applications logically ANDed and provide an output skew of 0.5 ns (typical) with propagation delays of 12 ns.• Differential Line Driver and Receiver for: – ST506 Disk Drive Standard The DS8921x devices are designed to be compatible with TTL and CMOS.– ST412 Disk Drive Standard – ESDI Disk Drive Standard Device Information(1) – RS-422 Interface PART NUMBER PACKAGE BODY SIZE (NOM) DS8921 SOIC (8) 4.90 mm x 3.91 mm DS8921A PDIP (8) 9.81 mm x 6.35 mmDS8921AT (1) For all available packages, see the orderable addendum at the end of the data sheet. SPACE Typical Application Block Diagram Simplified Functional Block Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.

DS8921,DS8921A,DS8921AT SNLS374D – MAY 1998– REVISED JANUARY 2015 www.ti.com Table of Contents

4 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision C (April 2013) to Revision D Page

  • Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Changes from Revision B (November 2004) to Revision C Page

2 Submit Documentation Feedback Copyright © 1998–2015, Texas Instruments Incorporated

Product Folder Links: DS8921 DS8921A DS8921AT

DS8921,DS8921A,DS8921AT www.ti.com SNLS374D – MAY 1998– REVISED JANUARY 2015

5 Pin Configuration and Functions

8 Pins

NAME NO. DIFFERENTIAL SIGNALING I/O DI 3 I TTL/CMOS Compatible Driver Input DO+, DO– 6, 5 O Inverting and non-inverting differential driver outputs RI+, RI– 8, 7 I Inverting and non-inverting differential receiver inputs RO 2 O Receiver Output Pin POWER GND 4 Power Ground Pin VCC 1 Power Supply pin, provide 5-V supply

6 Specifications

6.1 Absolute Maximum Ratings(1)(2)

Driver Input Voltage −0.5 7 V Output Voltage 5.5 V Receiver Output Sink Current 50 mA Receiver Input Voltage –10 10 V Differential Input Voltage –12 12 V Maximum Package Power Dissipation at 25°C: D Package 730 mW Maximum Package Power Dissipation at 25°C: P Package 1160 mW Derate D Package, above 25°C 9.3 mW/°C Derate P Package, above 25°C 5.8 mW/°C Lead Temperature 260 °C (Soldering, 4 sec.) 260 °C Maximum Junction Temperature 150 °C Storage Temperature, Tstg −65 165 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) If Military/Aerospace specified devices are required, please contact the Texas Instrument Sales Office/ Distributors for availability and specifications. Copyright © 1998–2015, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Links: DS8921 DS8921A DS8921AT

DS8921,DS8921A,DS8921AT SNLS374D – MAY 1998– REVISED JANUARY 2015 www.ti.com

6.2 ESD Ratings

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V(ESD) Electrostatic discharge VCharged-device model (CDM), per JEDEC specification JESD22- ±1500 C101(2) (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

Supply Voltage 4.5 5.5 V Temperature (TA): DS8921/DS8921A 0 70 °C Temperature (TA): DS8921AT −40 85 °C

6.4 Electrical Characteristics

Over operating free-air temperature range unless otherwise noted.(1)(2)(3) TEST CONDITIONS MIN TYP MAX UNIT RECEIVER VTH −7 V ≤ VCM ≤ +7 V −200 ±35 +200 mV VHYST −7 V ≤ VCM ≤ +7 V 15 70 mV RIN VIN = −7 V, +7 V, (Other Input = GND) 4.0 6.0 kΩ VIN = 10 V 3.25 mA IIN VIN = −10 V −3.25 mA VOH IOH = −400 μA 2.5 V VOL IOL = 8 mA 0.5 V ISC VCC = MAX, VOUT = 0 V −15 −100 mA DRIVER VIH 2.0 V VIL 0.8 V IIL VCC = MAX, VIN = 0.4 V −40 −200 μA IIH VCC = MAX, VIN = 2.7 V 20 μA II VCC = MAX, VIN = 7.0 V 100 μA VCL VCC = MIN, IIN = −18 mA −1.5 V VOH VCC = MIN, IOH = −20 mA 2.5 V VOL VCC = MIN, IOL = +20 mA 0.5 V IOFF VCC = 0V, V OUT = 5.5 V 100 μA VT 2.0 V |VOS – VOS| 0.4 V ISC VCC = MAX, VOUT = 0 V −30 −150 mA DRIVER AND RECEIVER ICC VCC = MAX, VOUT = Logic 0 35 mA (1) All currents into device pins are shown as positive values; all currents out of the device are shown as negative; all voltages are referenced to ground unless otherwise specified. All values shown as max or min are classified on absolute value basis. (2) All typical values are VCC = 5 V, TA = 25°C. (3) Only one output at a time should be shorted.

4 Submit Documentation Feedback Copyright © 1998–2015, Texas Instruments Incorporated

Product Folder Links: DS8921 DS8921A DS8921AT

results assume a linear transition between measurement points and are a result of the following equations: Where: DS8921,DS8921A,DS8921AT www.ti.com SNLS374D – MAY 1998– REVISED JANUARY 2015

6.5 Receiver Switching Characteristics

MAX MAX MAXTEST CONDITIONS MIN TYP UNIT8921 8921A 8921AT tpLH CL = 30 pF 14 22.5 20 20 ns (Figure 3 and Figure 4) tpHL CL = 30 pF 14 22.5 20 20 ns (Figure 3 and Figure 4) |tpLH–t pHL| CL = 30 pF 0.5 5 3.5 5 ns (Figure 3 and Figure 4)

6.6 Driver Switching Characteristics: Single-Ended Characteristics

MAX MAX MAXTEST CONDITIONS MIN TYP UNIT8921 8921A 8921AT tpLH CL = 30 pF 10 15 15 15 ns (Figure 5 and Figure 6) tpHL CL = 30 pF 10 15 15 15 ns (Figure 5 and Figure 6) tTLH CL = 30 pF 5 8 8 9.5 ns (Figure 9 and Figure 10) tTHL CL = 30 pF 5 8 8 9.5 ns (Figure 9 and Figure 10) Skew CL = 30 pF(1) 1 5 3.5 3.5 ns (Figure 5 and Figure 6) (1) Difference between complementary outputs at the 50% point.

6.7 Driver Switching Characteristics: Differential Characteristics(1)

MAX MAX MAXTEST CONDITIONS MIN TYP UNIT8921 8921A 8921AT tpLH CL = 30 pF 10 15 15 15 ns (Figure 5, Figure 7, and Figure 8) tpHL CL = 30 pF 10 15 15 15 ns (Figure 5, Figure 7, and Figure 8) |tpLH–t pHL| CL = 30 pF 0.5 6 2.75 2.75 ns (Figure 5, Figure 7, and Figure 8) (1) Differential Delays are defined as calculated results from single ended rise and fall time measurements. This approach in establishing AC performance specifications has been taken due to limitations of available Automatic Test Equipment (ATE). The calculated ATE Tcr = Crossing Point Tra, Trb, Tfa and T fb are time measurements with respect to the input. See Figure 8. Copyright © 1998–2015, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Links: DS8921 DS8921A DS8921AT

6.8 Typical Characteristics

Figure 1. Typical Driver Output Low to High Transition Time Figure 2. Typical Driver Output High to Low Transition Time

7 Parameter Measurement Information

7.1 AC Test Circuits and Switching Diagrams

Figure 3. Test Circuit for Receiver Output Figure 4. Receiver Propagation Delay Figure 5. Driver Test Circuit

6 Submit Documentation Feedback Copyright © 1998–2015, Texas Instruments Incorporated

8 Detailed Description

8.1 Overview

designed specifically for ST506, ST412, and ESDI disk drive standards, as well as RS-422 interface applications. DS8921AT is rated at an extended temperature range of -40°C to +85°C.

8.2 Functional Block Diagram

8.3 Feature Description

The DS8921x devices each contain a differential driver and receiver. output. The receiver offers an input sensitivity of ±200 mV and supports a common-mode input voltage of ±7 V.

8.4 Device Functional Modes

Table 1. Function Table (1) VID is the input differential voltage between RI+ and RI–.

8 Submit Documentation Feedback Copyright © 1998–2015, Texas Instruments Incorporated

9 Application and Implementation

validate and test their design implementation to confirm system functionality.

9.1 Application Information

links where ground reference difference, or noisy environment are common.

9.2 Typical Application

Figure 11 shows a typical implementation of the DS8921x device in a ST506 and ST412 disk drive application. connected across the input pins of the receiver. Figure 11. ST506 and ST412 Application

9.2.1 Design Requirements

  • Apply TTL or LVCMOS signal to driver input at DI
  • Transmit complementary outputs at DO+ and DO-
  • Receive complimentary input signals at RI+ and RI-
  • Receive TTL output signal at RO
  • Use controlled-impedance transmission lines such as printed circuit board traces, twisted-pair wires or parallel wire cable
  • Place terminating resistor at the far end of the differential pair

9.2.2 Detailed Design Procedure

  • Connect VCC and GND pins to the power and ground planes of the printed circuit board, with 0.1-uF bypass capacitor
  • Use TTL/LVCMOS logic levels at DI and RO
  • Use controlled-impedance transmission media for the differential signals DI+- and RO+-
  • Place a terminating resistor at the far-end of the differential pair to avoid reflection
  • Ensure the received complimentary signals at RO+ and RO- are within the signal threshold of ±200 mV

9.2.3 Application Curves

Figure 12. Driver Single-Ended Input Signal Figure 13. Driver Differential Output Signal

10 Submit Documentation Feedback Copyright © 1998–2015, Texas Instruments Incorporated

Figure 14. Receiver Differential Input Signal Figure 15. Receiver Single-Ended Output Signal

10 Power Supply Recommendations

11 Layout

11.1 Layout Guidelines

same as the differential impedance of the transmission line to minimize reflections. It is preferable to connect the VCC and GND pins to the power and ground planes using plated-through-holes. Additionally, a 0.1-µF bypass capacitor should be placed close to the VCC pin across VCC and GND. routed with uniform trace width and spacing to minimize impedance mismatch.

11.2 Layout Example

Figure 16. DS8921 Example Layout

12 Submit Documentation Feedback Copyright © 1998–2015, Texas Instruments Incorporated

12 Device and Documentation Support

12.1 Related Links

resources, tools and software, and quick access to sample or buy. Table 2. Related Links

12.2 Trademarks

All trademarks are the property of their respective owners.

12.3 Electrostatic Discharge Caution

during storage or handling to prevent electrostatic damage to the MOS gates.

12.4 Glossary

This glossary lists and explains terms, acronyms, and definitions.

13 Mechanical, Packaging, and Orderable Information

this document. For browser-based versions of this data sheet, refer to the left-hand navigation.

www.ti.com 19-Mar-2015 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples DS8921AM NRND SOIC D 8 95 TBD Call TI Call TI 0 to 70 DS89 21AM DS8921AM/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 DS89 21AM DS8921AMX NRND SOIC D 8 2500 TBD Call TI Call TI 0 to 70 DS89 21AM DS8921AMX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 DS89 21AM DS8921ATM NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 DS892 1ATM DS8921ATM/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS892 1ATM DS8921M/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 DS892 DS8921MX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 DS892 DS8921N/NOPB ACTIVE PDIP P 8 40 Green (RoHS & no Sb/Br) CU SN | Call TI Level-1-NA-UNLIM 0 to 70 DS8921N (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)

www.ti.com 19-Mar-2015 Addendum-Page 2 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 9-Oct-2014 Pack Materials-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS8921AMX SOIC D 8 2500 367.0 367.0 35.0 DS8921AMX/NOPB SOIC D 8 2500 367.0 367.0 35.0 DS8921MX/NOPB SOIC D 8 2500 367.0 367.0 35.0 PACKAGE MATERIALS INFORMATION www.ti.com 9-Oct-2014 Pack Materials-Page 2

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic”are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated