DS8830_15 TI1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 19

Technical content

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Single 5-V Supply /C0068Differential Line Operation /C0068Dual Channels /C0068TTL Compatibility /C0068Short-Circuit Protection of Outputs /C0068Output Clamp Diodes to Terminate Line Transients /C0068High-Current Outputs /C0068Quad Inputs /C0068Single-Ended or Differential AND/NAND Outputs /C0068Designed for Use With Dual Differential Drivers SN55182 and SN75182 /C0068Designed to Be Interchangeable With National Semiconductor DS7830 and DS8830

description

The DS8830, SN55183, and SN75183 dual differential line drivers are designed to provide differential output signals with high current capability for driving balanced lines, such as twisted pair, at normal line impedances without high power dissipation. These devices can be used as TTL expander/phase splitters, because the output stages are similar to TTL totem-pole outputs. The driver is of monolithic single-chip construction, and both halves of the dual circuits use common power supply and ground terminals. The SN55183 is characterized for operation over the full military temperature range of –55°C to 125°C. The DS8830 and SN75183 are characterized for operation from 0°C to 70°C. Copyright  1998, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. GND VCC SN55183 ...J O R W PACKAGE SN75183 ...D O R N PACKAGE DS8830 ... N PACKAGE (TOP VIEW) 3 2 1 20 19 91 01 11 2 1 3 NC NC NC NC SN55183 . . . FK PACKAGE (TOP VIEW)1B NC 2Y 2D GND NC CCV THE DS8830 AND SN55183 ARE NOT RECOMMENDED FOR NEW DESIGNS NC – No internal connection

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic symbol† † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, N, and W packages. logic diagram (positive logic) Pin numbers shown are for the D, J, N, and W packages. Positive logic: y = ABCD, Z = ABCD

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 schematic (each driver) A B C D 4 kΩ 3.2 kΩ GND Y 9 Ω 300 Ω Z VCC 3 kΩ 545 Ω 2 kΩ 545 Ω 3 kΩ 300 Ω2 kΩ 9 Ω V V 1, 10 2, 11 3, 12 4, 13 6, 8 5, 9 Resistor values shown are nominal. Pin numbers shown are for the D, J, N, and W packages.

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to network ground terminal. 2. Not more than one output should be shorted to ground at any one time. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR ABOVE T A = 25°C TA = 70°C POWER RATING TA = 125°C POWER RATING D 950 mW 7.6 mW/°C 608 mW – FK ‡ 1375 mW 11.0 mW/ °C 880 mW 275 mW J‡ 1375 mW 11.0 mW/ °C 880 mW 275 mW N 1150 mW 9.2 mW/ °C 736 mW – W ‡ 1000 mW 8.0 mW/°C 640 mW 200 mW ‡ In the FK, J, and W packages, SN55183 chips are alloy mounted and SN75183 chips are glass mounted. recommended operating conditions SN55183 DS8830, SN75183 UNIT MIN NOM MAX MIN NOM MAX Supply voltage, VCC 4.5 5 5.5 4.75 5 5.25 V High-level input voltage, VIH 2 2 V Low-level input voltage, VIL 0.8 0.8 V High-level output current, IOH –40 –40 mA Low-level output current, IOL 40 40 mA Operating free-air temperature, TA –55 125 0 70 °C

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998 5POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended ranges of VCC and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP † MAX UNIT VOH High level output voltageY (AND) outputs VIH =2V IOH = –0.8 mA 2.4 VVOH High-level output voltage Y (AND) outputs VIH = 2 V IOH = –40 mA 1.8 3.3 V VOL Low level output voltage Y (AND) outputs VIL=08V IOL = 32 mA 0.2 VVOL Low-level output voltage Y (AND) outputs VIL = 0.8 V IOL = 40 mA 0.22 0.4 V VOH High level output voltageZ (NAND) outputs VIL=08V IOH = –0.8 mA 2.4 VVOH High-level output voltage Z (NAND) outputs VIL = 0.8 V IOH = –40 mA 1.8 3.3 V VOL Low level output voltage Z (NAND) outputs VIH =2V IOL = 32 mA 0.2 VVOL Low-level output voltage Z (NAND) outputs VIH = 2 V IOL = 40 mA 0.22 0.4 V IIH High-level input current VIH = 2.4 V 120 µA II Input current at maximum input voltage VIH = 5.5 V 2 mA IIL Low-level input current VIL = 0.4 V –4.8 mA IOS Short-circuit output current‡ VCC = 5 V, TA =125°C § –40 –100 –120 mA ICC Supply current (average per driver) VCC = 5 V, All inputs at 5 V,No load 10 18 mA † All typical values are at VCC = 5 V, TA = 25°C. ‡ Not more than one output should be shorted to ground at a time, and duration of the short circuit should not exceed one second. § TA = 125°C is applicable to SN55183 only. switching characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT tPLH Propagation delay time, low- to high-level Y outputAND gates C L = 15 pF, See FIgure 1(a) 8 12 ns tPHL Propagation delay time, high- to low-level Y outputAND gates C L = 15 pF, See FIgure 1(a) 12 18 ns tPLH Propagation delay time, low- to high-level Z outputNAND gates C L = 15 pF, See FIgure 1(a) 6 12 ns tPHL Propagation delay time, high- to low-level Z outputNAND gates C L = 15 pF, See FIgure 1(a) 6 8 ns tPLH Propagation delay time, low- to high-level differential output Y output with respect to Z output, R L = 100 Ω in series with 5000 pF, See Figure 1(b) 9 16 ns tPHL Propagation delay time, high- to low-level differential output Y output with respect to Z output, R L = 100 Ω in series with 5000 pF, See Figure 1(b) 8 16 ns

6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

1.5 VInput

NOTES: A. The pulse generators have the following characteristics: ZO = 50 Ω , tr ≤ 10 ns, tf ≤ 10 ns, tw = 0.5 µs, PRR ≤ 1 MHz. B. C L includes probe and jig capacitance. C. Waveforms are monitored on an oscilloscope with ri ≥ 1 MΩ . Figure 1. Test Circuits and Voltage Waveforms

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998

8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TYPICAL CHARACTERISTICS † Figure 6 TA – Free-Air Temperature – °C – Propagation Delay Time – ns PROPAGATION DELAY TIME (DIFFERENTIAL OUTPUT) vs FREE-AIR TEMPERATURE ÏÏÏÏÏÏ ÏÏÏÏÏÏ VCC = 5 V See Figure 1(b) ÏÏÏ ÏÏÏ tPHL ÏÏÏ ÏÏÏ tPLH tpd –50 –25 0 25 125–75 100 7550 Figure 7 – Total Power Dissipation – mW TOTAL POWER DISSIPATION (BOTH DRIVERS) vs FREQUENCY f – Frequency – MHz ÁÁ ÁÁ ÁÁ PD ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ VCC = 5 V No Load Input: 3-V Square Wave TA = 25°C 240 220 200 180 160 140 120 100 0.1 1 0.4 4 10 40 100 † Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.

DS8830, SN55183, SN75183 DUAL DIFFERENTIAL LINE DRIVERS SLLS093D – OCTOBER 1972 – REVISED APRIL 1998 9POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

APPLICATION INFORMATION

(see Note B)Noninverting Input Strobe 0.002 µF (see Note A) 1/2 ’182 VCC = 5 V GND Y Z GND VCC = 5 V 1/2 ’183 Inputs D C B A R T NOTES: A. When the inputs are open circuited, the output is high. A capacitor may be used for dc isolation of the line-terminating resistor. At the frequency of operation, the impedance of the capacitor should be relatively small. B. Use of a capacitor to control response time is optional. Example: let f = 5 MHz C = 0.002 µF Z(circuit) /C009116/C0087 Z(circuit) /C00431 2/C0112fC /C0043 1 2/C0112/C04665 /C0032106/C0467/C04660.002/C003210/C00426/C0467 Inverting Input Figure 8. Transmission of Digital Data Over Twisted-Pair Line

www.ti.com 17-Dec-2015 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples 5962-7900901VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-7900901VC A SNV55183J 7900901CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7900901CA SNJ55183J DS8830N OBSOLETE PDIP N 14 TBD Call TI Call TI 0 to 70 SN55183J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 SN55183J SN75183D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 SN75183 SN75183DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 SN75183 SN75183N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75183N SN75183NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75183N SN75183NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 SN75183 SNJ55183J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7900901CA SNJ55183J (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)

www.ti.com 17-Dec-2015 Addendum-Page 2 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN55183, SN55183-SP, SN75183 :

  • Catalog: SN75183 , SN55183
  • Military: SN55183
  • Space: SN55183-SP NOTE: Qualified Version Definitions:
  • Catalog - TI's standard catalog product
  • Military - QML certified for Military and Defense Applications
  • Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 Pack Materials-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75183NSR SO NS 14 2000 367.0 367.0 38.0 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 Pack Materials-Page 2

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic”are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated