DS650DC-3

DS650DC-3 ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

©2020 Advanced Energy Industries, Inc. ARTESYN DS650DC-3/ DS850DC-3 Distributed Power Bulk Front-End Total Output Power: 650 - 850 Watts +3.3vdc Stand-by Output Standard Telco input range -39 V to -72 VDC DATA SHEETAdvanced Energy's Artesyn DS650DC and DS850DC series bulk front end power supplies are the DC-input versions of their DS650 and DS850 AC-input counterparts. Mechanically identical to the AC versions, these products allow system operation from a Telco style 48 Vdc input. Rated at 650 and 850 watts respectively, the power supplies provide a choice of 12 V, 24 V or 48 V output. Each model also provides a 3.3 V or optional 5.5 V standby output. Standard features include active current sharing, internal ORing FETs and an EEPROM for storing service data to facilitate efficient field replacement. An I C communication interface is provided for FRU EEPROM data. SPECIAL FEATURES  1U X 2U form factor  15.4W/ in  +12Vdc output  +3.3vdc stand-by (5V standby - consult factory)  No minimum load required  Hot plug operation  N + 1 redundant  Internal OR’ing fets  Active current sharing 2PSU shared from 30% to 100% 4PSU shared from 20% to100%  Built-in cooling fan (40mm x 28mm)  I C communication Interface bus  EEPROM for FRU data  Amber/green bi-color LED status  Internal fan speed control  Fan fail tach output signal  One year warranty SAFETY  UL/cUL 60950 (UL recognized)  NEMKO+ CB report EN60950  CE mark  China CCC DC Input Connector input shown

2 advancedenergy.com DS650DC-3/DS850DC-3 ELECTRICAL SPECIFICATIONS LOGIC CONTROL Input Input ra nge: -40 Vdc to -75 Vdc Efficiency: > 80% typical Conducted EMI: FCC Subpart J EN55022 Class B Radiated EMI: FCC Subpart J EN55022 Class B Hold up time: 1 ms @48 Vdc Output Main DC voltage: +12 V @ 70 A; DS850DC +12 V @ 52.5 A; DS650DC Stand-By: +3.3 Vsb @ 6A (5V @ 4A available) Adjustment range: Factory Set, no pot adjustments Regulation: +12 Vdc; +5%/-5% +3.3 Vsb; +5%/-5% Overcurrent: +12 Vdc; 77A - 105A - DS850DC; +12 Vdc 57.75 A - 78.75 A; DS650DC latches off if overcurrent lasts over 1 second, otherwise it is auto recovery. +3.3 vsb, 9A max (hiccup mode) Overvoltage: +12 Vdc; 13.2 - 14.4 Vdc +3.3 Vsb; 3.76 - 4.30 Vdc Under voltage: +12 Vdc; 9 - 10.8V (latch off) Turn-on delay: 2 Second max +12VOutput Rise Time: 10 - 300 mS, Monotonic Rise PS_SEATED TTL logic LOW if power supply is seated into system connector. This is a short pin. A logic HIGH if the PSU is removed. PWR GOOD Active TTL HiIGH when output is within regulation limits. DC Input OK A LOW logic level if the input voltage is within allowable limits. A TTL logic HIGH level, and a 5mS early warning signal before 12.0v DC output loss of regulation. Temp OK A TTL logic HIGH, when operating within allowable temperature range. PS_INHIBIT/PS_KILL When left open power supply operation will be inhibited. When the power supply is inserted into the system, this pin will be pulled low by the system and turn the power supply on.

advancedenergy.com 3 DS650DC-3/DS850DC-3 ENVIRONMENTAL SPECIFICATIONS

ORDERING INFORMATION

Tolerance Total Regulation Minimum Current Maximum Current Output Ripple P/P DS850DC-3 12.0 Vdc

3.3 Vsb*

± 0.2% ± 1% ± 5% ± 5% 0 A 0 A 70 A 6.0 A 120 mV 50 mV DS850DC-3-003 12.0 Vdc

5 Vsb*

± 0.2% ± 1% ± 5% ± 5% 0 A 0 A 70 A 4.0 A 120 mV 50 mV DS850DC-3-004 (Reverse airflow)

12.0 Vdc

± 0.2% ± 1% ± 5% ± 5% 0 A 0 A 70 A 6.0 A 120 mV 50 mV DS650DC-3 12.0 Vdc ± 0.2% ± 1% ± 5% ± 5% 0 A 0 A 52.5 A 6.0 A 120 mV 50 mV DS650DC-3-002 12.0 Vdc ± 0.2% ± 1% ± 5% ± 5% 0 A 0 A 52.5 A 4.0 A 120 mV 50 mV DS650DC-3-003 (Reverse airflow) ± 0.2% ± 1% ± 5% ± 5% 0 A 0 A 52.5 A 6.0 A 120 mV 50 mV Operating temperature: 0 to 50 °C, unimpeded airflow Storage temperature: -40 °C to +85 °C Altitude, operating: 10,000 ft Electromagnetic susceptibility/Input transients: -EN61000-3-2, -3-3 -EN55024:1998 RoHS & lead-free compliant (no tantalum caps.) Humidity: 20 to 90% RH, non-condensing Shock and vibration specificatons complies with Astec Std. Specifications. MTBF (observed) 500K Hrs at 80% load

4 advancedenergy.com DS650DC-3/DS850DC-3 MECHANICAL DRAWING Power Supply Condition LED Green/Amber No AC power to all PSU OFF AC present/Standby outpus ON, Main output OFF Blinking Green Power supply DC outputs ON and OK Solid Green Main output failure (OCP , OVP , UVP) Blinking Amber Fan Fail, OTP , Standby output OCP/UVP Solid Amber Terminal block input shown

advancedenergy.com 5 DS650DC-3/DS850DC-3 DC OUTPUT CONNECTOR PINOUT ASSIGNMENT P1 - POWER SUPPLY SIDE MATING CONNECTOR (SYSTEM SIDE) Male connector as viewed from the rear of the supply: D1 D2 D3 D4 D5 D6 PB1 PB2 PB3 PB4 PB5 PB6 C1 C2 C3 C4 C5 C6 B1 B2 B3 B4 B5 B6 A1 A2 A3 A4 A5 A6

1 FCI Power Blade 51721 series

2 Molex Power Connector

1 FCI Power Blade

2 FCI Power Blade

6 advancedenergy.com DS650DC-3/DS850DC-3 PIN ASSIGNMENTS Pin Signal Name PB 1 +12V RETURN PB 2 +12V RETURN PB 3 +12V RETURN PB 4 +12V PB 5 +12V PB 6 +12V A1 PS_ON A2 +12V RMT SENSE RETURN A3 TEMP_OK A4 PS_SEATED ( Power Supply Seated) A5 +3V3 STAND-BY A6 +3V3SB RETURN B1 DC input OK B2 +12V RMT SENSE B3 +12V CURRENT SHARE B4 PS_INHIBIT/PS_KILL B5 +3V3 STAND-BY B6 +3V3SB RETURN C1 SDA (I C Data Signal) C2 SCL (I C Clock Signal)* C3 POWER GOOD C4 FAN FAIL (Fan Fail Signal) C5 +3V3 STAND-BY C6 +3V3SB RETURN D1 A0 (I C Address BIT 0 Signal) D2 A1 (I C Address BIT 1 Signal) D3 S_INT (Alarm) D4 +3V3 STAND-BY RMT SENSE D5 +3V3 STAND-BY D6 +3V3SB RETURN *Supports I C standard mode (100 kHz) only

ENG-DS650DC-3/DS850DC-3-235-01 12.10 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.