DS64

DS64 LUMILEDS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 26

Technical content

DS64 LUXEON Rebel General Purpose Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT The LUXEON Rebel general purpose white line of LEDs are ideal for all lighting and illumination applications. These flux differentiated parts, like all other LUXEON Rebel LEDs, provide the industry’s best lumen maintenance, superior reliability and quality white light that make them the most widely used power LEDs today. luXEon Rebel General purpose white FEatuREs and BEnEFIts PRImaRy aPPlIcatIons Deliver more usable light and higher flux density Outdoor Optimize applications to reduce size and cost Specialty Small footprint to tightly pack the LEDs for mixing Utilize standard FR4 PCB technology for simplify manufacturing through the use of surface mount technology UL-recognized component [E327436]

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 2 Table of Contents

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 3 Product Nomenclature LUXEON Rebel is tested and binned at 350 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same. The part number designation is explained as follows: L X M L - A B C D - E F G H Where: A — designates radiation pattern (value P for Lambertian) B — designates color (W = White) C — designates tint variant (C = Cool-White or N = Neutral-White) D — designates test current (value 1 for 350 mA) E — reserved for future product offerings FGH — minimum luminous flux (lm) Therefore products tested and binned at 350 mA follow the part numbering scheme: L X M L - P W x 1 - 0 x x x Average Lumen Maintenance Characteristics Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. Lumileds projects that LUXEON Rebel products will deliver, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. This performance is based on independent test data, Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH and RoHS directives. Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). General Product Information

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 4 Luminous Flux Characteristics for LUXEON Rebel, Thermal Pad T emperature=25°C T able 1. Performance at T est Current Typical Performance at Indicated Current Color Part Number Minimum Luminous T est Typical Luminous Drive Flux (lm) Current Flux (lm) Current FV [1] (mA) FV [2] (mA) LXML-PWC1-0090 90 350 160 700 LXML-PWC1-0100 100 350 180 700 LXML-PWC1-0110 110 350 200 700 LXML-PWC1-0120 120 350 220 700 LXML-PWN1-0090 90 350 160 700 LXML-PWN1-0100 100 350 180 700 LXML-PWN1-0110 110 350 200 700 LXML-PWN1-0120 120 350 220 700 Notes for Table 1: 1. Minimum luminous flux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ± 6.5% on flux measurements. 2. Typical luminous flux performance when device is operated within published operating conditions. Flux Performance, Binning, and Supportability LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Lumileds separates LEDs into fixed, easy to design with, minimum luminous flux bins. T o verify supportability of parts chosen for your application design, please consult your Lumileds representative. Luminous Flux Characteristics Cool White Neutral-White Volume Luminous Flux Bins

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 5 Lambertian LUXEON Rebel at T est Current [1] Thermal Pad T emperature = 25°C T able 2. Typical T otal Typical Included Viewing Color T emperature [2, 3, 4] Angle [6] Angle [7] CCT (degrees) (degrees) Color [7, 8] Min. Typ. Max. u0.90V [5] 2u 1/2 Cool-White 4500K 6500K 10,000K 160 120 Neutral-White 3500K 4100K 4500K 160 120 Notes for Table 2: 1. T est current is 350 mA for all LXML-PWx1-0xxx products. 2. CCT ±5% tester tolerance. 3. Typical CRI (Color Rendering Index) for cool-white and neutral-white is 70. 4. Minimum CRI (Color Rendering Index) for cool-white and neutral-white is 65. 5. T otal angle at which 90% of total luminous flux is captured. 6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 7. All white products are built with Indium Gallium Nitride (InGaN). 8. Cool-white and neutral-white power light sources represented here are IEC825 class 2 for eye safety. Optical Characteristics

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 6 Electrical Characteristics at 350 mA for LUXEON Rebel, Part Numbers LXML-PWx1-0xxx, Thermal Pad T emperature = 25ºC T able 3. Typical T emperature Typical Thermal Coefficient of Resistance Forward Voltage Vf [1] Forward Voltage [2] Junction to (V) (mV/°C) Thermal Pad (°C/W) Color Min. Typ. Max. DVf / DTJ Ru J-C Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C = TJ = 110°C at If = 350 mA. Typical Electrical Characteristics at 700 mA for LUXEON Rebel, Part Numbers LXML-PWx1-0xxx, Thermal Pad T emperature = 25ºC [2] T able 4. Typical Forward Voltage Vf [1] Color (V) Cool-White 3.20 Neutral-White 3.20 Notes for Table 4: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C = TJ = 110°C at If = 700 mA.

Electrical Characteristics

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 7 Absolute Maximum Ratings T able 5. Parameter Cool-White/Neutral-White DC Forward Current (mA) 1000 Peak Pulsed Forward Current (mA) 1000 Average Forward Current (mA) 1000 ESD Sensitivity < 8000V Human Body Model (HBM) Class 2 JESD22-A114-B < 400V Machine Model (MM) Class 2 JESD22-A115-B LED Junction Temperature [1] 150°C Operating Case Temperature at 350 mA -40°C - 135°C Storage Temperature -40°C - 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. JEDEC Moisture Sensitivity T able 6. Soak Requirements Level Floor Life Standard Time Conditions Time Conditions 1 unlimited [ 30°C / 168h 85°C / 85% 85% RH + 5 / -0 RH

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 8 Table 7. Profile Feature Lead Free Assembly Ramp-Up Rate (TL to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second max Time 25°C to Peak Temperature 8 minutes max Notes for Table 7: - All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. Reflow Soldering Characteristics JEDEC 020c

Figure 1. Package outline drawing. excessive force to the lens.

• All dimensions are in millimeters.
• The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.

• The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.

Figure 2. Pad configuration. Figure 3. Solder pad layout.

2 ANODE

1 CATHODE

0.4 Cool-White

Figure 5. Relative luminous flux vs. thermal pad temperature.

Figure 6. Forward current vs. forward voltage.

Figure 7. Relative luminous flux or radiometric power vs. forward current for cool-white and neutral-white, Thermal Pad = 25ºC maintained.

Figure 10. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.

Figure 13. Emitter pocket tape packaging

Figure 14. Emitter reel packageing

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 20 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage (V f ). Decoding Product Bin Labeling LUXEON Rebel emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of Cool-White and Neutral-White emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A = Flux bin (J, K, L, M etc.) B and C = Color bin (W0, U0, V0 etc.) D = V f bin (D, E, F , G etc.)

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 21 Luminous Flux Bins Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350 mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 8. Flux Bins Minimum Photometric Flux Maximum Photometric Flux Bin Code (lm) (lm) H 50 60 J 60 70 K 70 80 L 80 90 M 90 100 N 100 110 X 110 120 P 120 130 Y 130 140 Q 140 150 R 150 160

Figure 15. Cool-White bin structure.

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 23 Cool-White LUXEON Rebel emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 4,500K to 10,000K. T able 9. Cool-White Bin Coordinates Typical CCT Typical CCT Bin Code X Y (K) Bin Code X Y (K) 0.274238 0.300667 0.318606 0.310201 Y0 0.303051 0.332708 8000 WQ 0.329393 0.320211 6000 0.307553 0.310778 0.329544 0.310495 0.282968 0.283772 0.319597 0.301303 0.282968 0.283772 0.328636 0.368952 YA 0.307553 0.310778 8000 VM 0.348147 0.385629 5300 0.311163 0.293192 0.346904 0.371742 0.289922 0.270316 0.328823 0.356917 0.301093 0.342244 0.328823 0.356917 XM 0.313617 0.354992 6700 VN 0.346904 0.371742 5300 0.314792 0.344438 0.345781 0.359190 0.303051 0.332708 0.329006 0.345092 0.303051 0.332708 0.329006 0.345092 XN 0.314792 0.344438 6700 V0 0.345781 0.359190 5300 0.316042 0.333222 0.344443 0.344232 0.305170 0.322386 0.329220 0.331331 0.305170 0.322386 0.329220 0.331331 X0 0.316042 0.333222 6700 VP 0.344443 0.344232 5300 0.317466 0.320438 0.343352 0.332034 0.307553 0.310778 0.329393 0.320211 0.307553 0.310778 0.348147 0.385629 XP 0.317466 0.320438 6700 UM 0.367294 0.400290 4750 0.319597 0.301303 0.364212 0.382878 0.311163 0.293192 0.346904 0.371742 0.313617 0.354992 0.346904 0.371742 WM 0.328636 0.368952 6000 UN 0.364212 0.382878 4750 0.328823 0.356917 0.362219 0.371616 0.314792 0.344438 0.345781 0.359190 0.314792 0.344438 0.345781 0.359190 WN 0.328823 0.356917 6000 U0 0.362219 0.371616 4750 0.329006 0.345092 0.359401 0.355699 0.316042 0.333222 0.344443 0.344232 0.316042 0.333222 0.344443 0.344232 W0 0.329006 0.345092 6000 UP 0.359401 0.355699 4750 0.329220 0.331331 0.357079 0.342581 0.317466 0.320438 0.343352 0.332034 0.317466 0.320438 WP 0.329220 0.331331 6000 0.329393 0.320211 0.318606 0.310201 Note for Table 9: - Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.

Neutral-White LUXEON Rebel emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 3,500K to 4,500K.

• Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.

Figure 16. Neutral-White bin structure.

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 25 Forward Voltage Bins Table 11 lists minimum and maximum Vf bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. T able 11. Vf Bins Minimum Forward Voltage Maximum Forward Voltage Bin Code (V) (V) B 2.55 2.79 C 2.79 3.03 D 3.03 3.27 E 3.27 3.51 F 3.51 3.75 G 3.75 3.99

DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Lumileds Holding B.V. neither warranties, nor guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com.