DS63 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 21

Technical content

DS063 LUXEON Rebel Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT FEATURES AND BENEFITS PRIMARY APPLICATIONS Specified CCT & CRI combinations Downlights 1/4th ANSI binning Lamps High efficacy for sustainable design Specialty Lighting More light delivered at operating temperature Exceeds ENERGY STAR® lumen maintenance requirements UL-recognized component [E352519] ILLUMINATION

  • LUXEON Rebel Plus
  • LUXEON T For NEW designs consider this replacement product: LUXEON Rebel LEDs deliver optimized combinations of light quality and light output needed for a variety of lighting applications. In addition to delivering specified correlated color temperature and color rendering combinations, these emitters deliver the efficacy, lifetime and reliability that all LUXEON LEDs are renowned for. LUXEON Rebel Reliable high-power LED that gives you the design flexibility and performance you need
  • LUXEON TX
  • LUXEON Z ES NO LONGER ORDERABLE

DS063 LUXEON Rebel Product Datasheet 20160627 ©2016 Lumileds Holding B.V. All rights reserved. i Table of Contents NO LONGER ORDERABLE

DS063 LUXEON Rebel Product Datasheet 20160627 ©2016 Lumileds Holding B.V. All rights reserved. 2 General Information Part Number Nomenclature LUXEON Rebel Illumination emitters are tested and binned at 350mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25°C typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same. The LUXEON Rebel Illumination Portfolio is a series of power LED emitters designed for illumination. The part number designations are explained as follows: L X M 3 - A B C D Where: A — designates radiation pattern (value P for Lambertian) B — designates color (W for White) C — designates nominal CCT D — designates test current (value 1 for 350mA) Average Lumen Maintenance Characteristics Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. Lumileds projects that LUXEON Rebel products will deliver, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of up to 700mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. This performance is based on independent test data, Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely REACH and the RoHS directive. Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). NO LONGER ORDERABLE

DS063 LUXEON Rebel Product Datasheet 20160627 ©2016 Lumileds Holding B.V. All rights reserved. 3 Product Selection for LUXEON Rebel Thermal Pad Temperature = 25°C Table 1. Nominal CCT Part Number Minimum CRI Typical CRI Typical Min Luminous Flux FV Typ Luminous Flux FV 2700K LXM3-PW81 80 85 18 65 88 3000K LXM3-PW71 80 85 22 66 94 3500K LXM3-PW61 80 85 30 67 95 4000K LXM3-PW51 80 85 28 75 103 Notes for Table 1: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements and ±2 on CRI measurements. 2. Test current is 350mA. Optical Characteristics LUXEON Rebel at Test Current [1, 5], Thermal Pad Temperature = 25°C Table 2. Nominal CCT Color Temperature [2] CCT Typical Total Included Angle [3] (°C) u0.90V Typical Viewing Angle [4] (°C) 2u 1/2Minimum Typical Maximum 2700K 2580K 2725K 2870K 160° 120° 3000K 2870K 3045K 3220K 160° 120° 3500K 3220K 3465K 3710K 160° 120° 4000K 3710K 3985K 4260K 160° 120° Notes for Table 2: 1. Test current is 350mA. 2. CCT ±5% tester tolerance. 3. Total angle at which 90% of total luminous flux is captured. 4. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 5. All white products are built with Indium Gallium Nitride (InGaN). NO LONGER ORDERABLE

DS063 LUXEON Rebel Product Datasheet 20160627 ©2016 Lumileds Holding B.V. All rights reserved. 4

Electrical Characteristics

Electrical Characteristics at 350mA, Thermal Pad Temperature = 25°C Table 3. Part Number Forward Voltage Vf [1] (V) Typ. Temperature Coefficient of Forward Voltage [2] (mV/°C) DVf / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C Minimum Typical Maximum Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C = TJ = 110°C at If = 350mA. Absolute Maximum Ratings Table 4. Parameter Maximum Performance DC Forward Current (mA) [3] 700 Peak Pulsed Forward Current (mA) [3] 700 Average Forward Current (mA) [3] 700 ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A JESD22-A114-E LED Junction Temperature [1, 3] 135°C Operating Case Temperature at 350mA -40°C - 135°C Storage Temperature -40°C - 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. 3. Maximum Ratings of 1000mA forward drive current or LED junction temperature of 150°C can be applied for device operation not to exceed 60 seconds. JEDEC Moisture Sensitivity Table 5. Level Floor Life Soak Requirements Standard Time Conditions Time Conditions 1 unlimited [ 30°C / 85% RH 168h + 5 / - 0 85°C / 85% RH NO LONGER ORDERABLE

DS063 LUXEON Rebel Product Datasheet 20160627 ©2016 Lumileds Holding B.V. All rights reserved. 5 Reflow Soldering Characteristics Temperature profile for Table 7. Table 6. Profile Feature Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature (TL) 217°C Time Maintained Above Temperature (TL) (tL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp - Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Notes for Table 6: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. JEDEC 020c NO LONGER ORDERABLE

  1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens.
  2. All dimensions are in millimeters.
  3. The thermal pad is electrically isolated from the anode and cathode contact pads.

Figure 1. Package outline drawing.

  1. The thermal pad is electrically isolated from the anode and cathode contact pads.
  2. The photograph shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7 K/W.

2 ANODE

1 CATHODE

Figure 2. Pad configuration. Figure 3. Solder pad layout.

Figure 8. Relative light output vs. thermal pad temperature.

Figure 15. Emitter pocket tape packaging.

Figure 16. Emitter reel packaging.

emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Table 7 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350mA). Not all bins are available in all colors. Table 7. Flux Bins - All Colors

Figure 17. LUXEON Rebel ANSI 1/4th quadrant bin structure.

LUXEON Rebel emitters are tested and binned by x,y coordinates.

32 Color Bins, CCT Range 2580K to 7040K

Table 8. LUXEON Rebel ANSI 1/4th Quadrant Bin Coordinates Table 8 continued on next page.

Table 8. LUXEON Rebel ANSI 1/4th Quadrant Bin Coordinates, Continued

  1. Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.

in a particular bin varies by production run and by product performance. Table 9. Vf Bins

Product Datasheet 20160627 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines visit lumileds.com. ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com NO LONGER ORDERABLE