DS59 LUMILEDS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 19
Technical content
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT Automotive grade LUXEON Rebel LEDs are designed and tested to meet and exceed expectations for reliability, performance and lifetime in all vehicle applications. LUXEON Rebel Red-Orange and Amber LEDs are particularly advantageous for both efficient light guide coupling and automotive tail applications, and for high brightness automotive applications. Lumileds automotive color binning structure meets both SAE and ECE color specifications. LUXEON Rebel meets both SAE and ECE color specifications and provides finer granularity than existing systems. LUXEON Rebel, Red-Orange & Amber High flux solution for signaling
applications
FEATUREs ANd BENEFITs PRIMARy APPLIcATIONs High flux output provides flexibility in styling and optical design Rear Fog Low forward voltage results in higher efficacy and lower solution costs Side Marker Electrically isolated thermal pad to reduce thermal management engineering costs Stop/Tail AEC-Q101C qualified and PPAP documentation available Turn
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. i Table of Contents
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. 2 General Information Part Number Nomenclature LUXEON Rebel is tested and binned at 350mA. The part number designation is explained as follows: L X M A - A B C D - E F G H Where: A — designates radiation pattern (value P for Lambertian) B — designates color variant (L for amber, H for red-orange) C — designates color variant (0 for automotive amber and red-orange) D — designates technology (1 for automotive amber and red-orange standard flux direct color; 2 for red-orange high flux direct color) E — reserved for future product offerings FGH — minimum luminous flux (lm) performance Products tested and binned at 350mA follow the part numbering scheme: L X M A - P x 0 x - x x x x LED Lifetime Characteristics Lifetime for solid state lighting devices (LEDs) is defined in terms of lumen maintenance - the percentage of initial light output remaining after a specified period of time - and light output failures such as shorts. These two degradation modes are both considered in Lumileds LED lifetime assessment. LED lifetime performance is based on independent test data, Lumileds historical data from tests run on similar material systems, and internal product reliability testing. Please contact your Lumileds Sales Representative for LUXEON LED product lifetime assessment for your operational conditions. Environmental Compliance Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. The LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH, ELV, and RoHS directives. Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. 3 Flux Characteristics Flux Characteristics for LUXEON Rebel, Junction Temperature, Tj = 25°C [4] Table 1. Performance at Binning Current Typical Performance at Maximum Current Color Part Number [5] Minimum Luminous Flux (lm) FV [1] [3] Binning Current (mA) Typical Luminous Flux (lm) FV [2] [3] Maximum Current (mA) Red-Orange LXMA-PH01-0040 LXMA-PH01-0050 LXMA-PH02-0060 LXMA-PH02-0070 350 350 350 350 122 134 700 700 700 700 Amber LXMA-PL01-0023 LXMA-PL01-0030 LXMA-PL01-0040 23.5 350 350 350 700 700 700 Note for Table 1: 1. Minimum luminous flux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ±6.5% on flux measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Lumileds for more information. 4. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C. 5. Please contact Lumileds for information on custom part numbers. Optical Characteristics Lambertian LUXEON Rebel at Test Current [1], Junction Temperature, Tj = 25°C [8] Table 2. Color Dominant Wavelength (nm) Typical Spectral Half-width [3] (nm) Dl1/2 Typical Temperature Coefficient of Dominant Wavelength (nm/°C) DlD / DTJ Typical Total Included Angle [4] (degrees) u0.90V Typical Viewing Angle [5] (degrees) 2u 1/2Minimum Typical Maximum Red-Orange 613.0 nm 617.0 nm 620.0 nm 20 0.08 160 125 Amber 587.0 nm 590.0 nm 592.0 nm 14 0.10 160 125 Notes for Table 2: 1. LUXEON Rebel is tested and binned at 350mA. 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Lumileds maintains a tolerance of ±0.5 nm for dominant wavelength measurements. 3. Spectral width at 1/2 of the peak intensity. 4. Total angle at which 90% of total luminous flux is captured. 5. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 6. Junction temperature is estimated based on instant measurement at thermal pad temperature of 25°C.
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. 4
Electrical Characteristics
Electrical Characteristics at 350mA for LUXEON Rebel, Junction Temperature, Tj = 25°C Table 3. Part Number Forward Voltage Vf [1] (V) Typical Dynamic Resistance [4] (Ω) RD Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) [3] Ru J-C Minimum Typical Maximum LXMA-PH01-0040 LXMA-PH01-0050 LXMA-PH02-0060 LXMA-PH02-0070 2.31 2.31 1.80 1.80 2.9 2.9 2.10 2.10 3.51 3.51 2.80 2.80 1.5 1.5 0.57 0.57 -2.0 to -4.0 -2.0 to -4.0 -2.0 to -4.0 -2.0 to -4.0 LXMA-PL01-0023 LXMA-PL01-0030 LXMA-PL01-0040 2.31 2.31 2.31 2.9 2.9 2.9 3.51 3.51 3.51 1.3 1.3 1.3 -2.0 to -4.0 -2.0 to -4.0 -2.0 to -4.0 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between TJ = 25°C - 110°C at If = 350mA. 3. Does not include wall plug efficiency. 4. Dynamic resistance is the inverse of the slope in the linear forward voltage model for LEDs. See Forward Voltage vs. Forward Current curves. Typical Electrical Characteristics at 700mA for LUXEON Rebel, Junction Temperature, Tj = 25°C Table 4. Part Number Typical Forward Voltage Vf [1] (V) LXMA-PH01-0040 LXMA-PH01-0050 LXMA-PH02-0060 LXMA-PH02-0070 3.60 3.60 2.30 2.30 LXMA-PL01-0023 LXMA-PL01-0030 LXMA-PL01-0040 3.60 3.60 3.60 Notes for Table 4: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. 5 Absolute Maximum Ratings Table 5a. Parameter Red-Orange/Amber DC Forward Current (mA) 700 Peak Pulsed Forward Current (mA) 700 Average Forward Current (mA) 700 ESD Sensitivity [5] 8kV HBM, 400V MM LED Junction Temperature [1] [3] [4] 135°C Operating Case Temperature [4] -40°C - 135°C Storage Temperature -40°C - 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 Notes for Table 5a: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. 3. LUXEON Rebel Automotive LEDs driven at maximum LED junction temperature will have limited lifetime. 4. Please consult with Lumileds for more information on maximum time durations and forward currents for these temperature ranges. 5. Measured using human body model and machine model (per AEC-Q101C). Absolute Minimum Ratings Table 5b. Parameter Red-Orange/Amber DC Forward Current (mA) 50 JEDEC Moisture Sensitivity Table 6. Level Floor Life Soak Requirements Standard Time Conditions Time Conditions 1 unlimited [ 30°C / 85% RH 168 Hrs. + 5 / -0 Hrs. 85°C / 85% RH
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. 6 Reflow Soldering Characteristics Table 7. Profile Feature Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp - Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Note for Table 7:
- All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. Temperature Profile for Table 7.
Figure 1. Package outline drawing.
- Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens.
- All dimensions are in millimeters.
- The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Figure 4. Relative light output vs. thermal pad temperature for red-orange and amber AlInGaP at Test Current (Monopulse Measurement).
Figure 5. Forward voltage vs. forward current.
Figure 6. Relative luminous flux vs. forward current for red-orange and amber (Monopulse).
Figure 11. Emitter pocket tape packaging.
Figure 12. Emitter reel packaging.
for emitters packaged on a singe reel. All emitters packaged within a reel are of the same 3-variable bin combination. Reels of amber emitters are labeled with a three digit alphanumeric CAT code following the format below. Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters. performance. Not all bins are available in all colors. Table 8. Flux Bins - All Colors
- Photometric luminous flux bin structure for LUXEON Rebel emitters.
Red-Orange LUXEON Rebel Emitters for automotive applications are tested and binned for dominant wavelength. Amber LUXEON Rebel Emitters for automotive applications are tested and binned for dominant wavelength. availability in a particular bin varies by production. Table 11. Forward Voltage Bin Structure for LUXEON Rebel Red-Orange (LXMA-PH01) and Amber (LXMA-PL01) Emitters Table 12. Forward Voltage Bin Structure for LUXEON Rebel Automotive Red-Orange (LXMA-PH02) Emitters
DS59 LUXEON Rebel Red-Orange & Amber Product Datasheet 20140904 ©2015 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. www.lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the light engine leader, delivering innovation, quality, and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit www.lumileds.com.