DS58 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 24

Technical content

DS58 LUXEON Rebel White & PC Amber Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT LUXEON Rebel LEDs for automotive has the longest history in high power exterior lighting applications that are specifically designed and tested to meet and exceed expectations for reliability, performance and lifetime in all vehicle applications. LUXEON Rebel meets both SAE and ECE color specifications and provides finer granularity than existing systems. LUXEON Rebel, White & PC Amber Styling solution for front turn and side marker applications FEATUREs ANd BENEFITs PRIMARy APPLICATIONs Drive at maximum current for upto 230 lumens for reduced LED count Back-up Low thermal resistance for lower heat sink costs Daytime Running Lights Electrically isolated thermal pad to reduce thermal management engineering costs - Position AEC-Q101C qualified and PPAP documentation available Side Marker Turn

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. 2 General Information Product Nomenclature LUXEON Rebel is tested and binned at 350mA. The part number designation is explained as follows: L X M A - A B C D - E F G H Where: A — designates radiation pattern (value P for Lambertian) B — designates color variant (W for Automotive White, L for PC Amber) C — designates color variant (0 for Automotive White) D — designates technology (1 for Automotive White; 2 for PC Amber) E — reserved for future product offerings FGH — minimum luminous flux (lm) performance Products tested and binned at 350mA follow the part numbering scheme: L X M A - P x 0 x - x x x x LED Lifetime Characteristics Lifetime for solid state lighting devices (LEDs) is defined in terms of lumen maintenance - the percentage of initial light output remaining after a specified period of time - and light output failures such as shorts. These two degradation modes are both considered in Lumileds LED lifetime assessment. LED lifetime performance is based on independent test data, Lumileds historical data from tests run on similar material systems, and internal product reliability testing. Please contact your Lumileds Sales Representative for LUXEON LED product lifetime assessment for your operational conditions. Environmental Compliance Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. The LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH, ELV, and RoHS directives. Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. 3 Flux Characteristics Flux Characteristics for LUXEON Rebel, Junction Temperature, Tj = 25°C [4] Table 1. Performance at Binning Current Typical Performance at Maximum Current Color Part Number [5] Minimum Luminous Flux (lm) FV [1] [3] Binning Current (mA) Typical Luminous Flux (lm) FV [2] [3] Maximum Current (mA) Automotive White LXMA-PW01-0110 LXMA-PW01-0120 LXMA-PW01-0130 110 120 130 350 350 350 199 216 233 700 700 700 PC Amber LXMA-PL02-0090 LXMA-PL02-0100 LXMA-PL02-0110 100 110 350 350 350 170 187 204 700 700 700 Note for Table 1: 1. Minimum luminous flux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ± 6.5% on flux measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Lumileds for more information. 4. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C. 5. Please contact Lumileds for information on custom part numbers. Optical Characteristics Lambertian LUXEON Rebel at Test Current [1], Junction Temperature, Tj = 25°C [9] Table 2. Color Color Temperature [2], [3] CCT Typical Spectral Half-width [5] (nm) Dl1/2 Typical Temperature Coefficient of Dominant Wavelength (nm/°C) DlD / DTJ Typical Total Included Angle [6] u0.90V Typical Viewing Angle [7] 2u 1/2Minimum Typical Maximum Automotive White [8] 3800 K 5500 K 6300 K — — 160° 120° PC Amber [8] 588.0 nm 591.0 nm 592.0 nm 80 0.10 160° 120° Notes for Table 2: 1. LUXEON Rebel is tested and binned at 350mA. 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. CCT ±5% tester tolerance. 4. CRI (Color Rendering Index) for white product types is 70 typical. 5. Spectral width at 1/2 of the peak intensity. 6. Total angle at which 90% of total luminous flux is captured. 7. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 8. All white and PC Amber products are built with Indium Gallium Nitride (InGaN). 9. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C.

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. 4

Electrical Characteristics

Electrical Characteristics at 350mA for LUXEON Rebel, Junction Temperature, Tj = 25°C Table 3. Part Number Forward Voltage Vf [1] (V) Typical Dynamic Resistance [4] (Ω) RD Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) [3] Ru J-C Minimum Typical Maximum LXMA-PW01-0110 LXMA-PW01-0120 LXMA-PW01-0130 2.55 2.55 2.55 2.92 2.92 2.92 3.27 3.27 3.27 .30 .30 .30 -2.0 to -4.0 -2.0 to -4.0 -2.0 to -4.0 LXMA-PL02-0090 LXMA-PL02-0100 LXMA-PL02-0110 2.55 2.55 2.55 2.92 2.92 2.92 3.27 3.27 3.27 0.36 0.36 0.36 -2.0 to -4.0 -2.0 to -4.0 -2.0 to -4.0 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between TJ = 25°C - 110°C at If = 350mA. 3. Does not include wall plug efficiency. 4. Dynamic resistance is the inverse of the slope in the linear forward voltage model for LEDs. See Forward Voltage vs. Forward Current curves. Typical Electrical Characteristics at 700mA for LUXEON Rebel, Junction Temperature, Tj = 25°C Table 4. Part Number Typical Forward Voltage Vf [1] (V) LXMA-PW01-0110 LXMA-PW01-0120 LXMA-PW01-0130 3.06 3.06 3.06 LXMA-PL02-0090 LXMA-PL02-0100 LXMA-PL02-0110 3.06 3.06 3.06 Notes for Table 4: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. 5 Absolute Maximum Ratings Table 5a. Parameter Automotive White PC Amber DC Forward Current (mA) 700 700 Peak Pulsed Forward Current (mA) 1000 700 Average Forward Current (mA) 700 700 ESD Sensitivity [5] 8kV HBM, 400V MM 8kV HBM, 400V MM LED Junction Temperature [1] [3] [4] 150°C 135°C Operating Case Temperature [4] -40°C - 150°C -40°C - 135°C Storage Temperature -40°C - 135°C -40°C - 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 See Note 2 Notes for Table 5a: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. 3. LUXEON Rebel Automotive LEDs driven at maximum LED junction temperature will have limited lifetime. 4. Please consult with Lumileds for more information on maximum time durations and forward currents for these temperature ranges. 5. Measured using human body model and machine model (per AEC-Q101C). Absolute Minimum Ratings Table 5b. Parameter Automotive White PC Amber DC Forward Current (mA) 50 50 JEDEC Moisture Sensitivity Table 6. Level Floor Life Soak Requirements Standard Time Conditions Time Conditions 1 unlimited [ 30°C / 85% RH 168 Hrs. + 5 / -0 Hrs. 85°C / 85% RH

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. 6 Reflow Soldering Characteristics Table 7. Profile Feature Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp - Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Note for Table 7:

  • All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. Temperature Profile for Table 7.

Figure 1. Package outline drawing.

  1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens.
  2. All dimensions are in millimeters.
  3. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
  1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.

files are available at www.lumileds.com. Figure 2. Solder pad layout.

Figure 19. Emitter pocket tape packaging.

Figure 20. Emitter reel packaging.

for emitters packaged on a singe reel. All emitters packaged within a reel are of the same 3-variable bin combination. Reels of PC Amber emitters are labeled with a three digit alphanumeric CAT code following the format below. Reels of Automotive White emitters are labeled with a four digit alphanumeric CAT code following the format below. Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters. performance. Not all bins are available in all colors. Table 8. Flux Bins - All Colors

  1. Photometric luminous flux bin structure for LUXEON Rebel emitters.

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. 20 Color Bin Structure LUXEON Rebel Automotive White Color Bin Structure LUXEON Rebel emitters for Automotive White applications are tested and binned by x,y coordinates. Table 9. Bin Code X Y Typical CCT (K) Bin Code X Y Typical CCT (K) WN 0.328816 0.329006 0.316035 0.314789 0.356915 0.345100 0.333218 0.344429 6000 TN 0.381106 0.378264 0.362219 0.364212 0.393747 0.382458 0.371616 0.382878 4300 WO 0.329006 0.329225 0.317472 0.316035 0.345100 0.331336 0.320439 0.333218 6000 TO 0.378264 0.374075 0.359401 0.362219 0.382458 0.365822 0.355699 0.371616 4300 WP 0.329225 0.329389 0.318609 0.317472 0.331336 0.320204 0.310206 0.320439 6000 TP 0.374075 0.370582 0.357079 0.359401 0.365822 0.351953 0.342581 0.355699 4300 VN 0.346991 0.345780 0.329006 0.328816 0.372678 0.359192 0.345100 0.356915 5300 SN 0.396279 0.392368 0.378264 0.381106 0.403508 0.390932 0.382458 0.393747 3950 VO 0.345780 0.344449 0.329225 0.329006 0.359192 0.344234 0.331336 0.345100 5300 SO 0.392368 0.387071 0.374075 0.378264 0.390932 0.373899 0.365822 0.382458 3950 Notes for Table 9: 1. Lumileds maintains a tester tolerance of ± 0.005 on x, y color coordinates.

  1. WN, WO, WP, VN, VO are supportable.
  2. TN, TO, TP, SN, SO are not supportable for new programs.

Figure 21. LUXEON Rebel Automotive White color binning structure graphical representation. Coordinates listed in Table 9.

  1. LUXEON Rebel PC Amber emitters are tested and binned by x, y coordinates.
  2. Lumileds maintains a tester tolerance of ± 0.005 on x, y coordinates.
  3. Test conditions of 350mA with current pulse duration of 20ms.

in a particular bin varies by production. Table 11. Forward Voltage Bin Structure for LUXEON Rebel Automotive White, PC Amber and Amber Emitters Figure 22. LUXEON Rebel Automotive PC Amber binning structure graphical representation. Coordinates listed in Table 11.

DS58 LUXEON Rebel White & PC Amber Product Datasheet 20150324 ©2015 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. www.lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the light engine leader, delivering innovation, quality, and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit www.lumileds.com.