DS58-0001 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Small Size, Low Profile
  • Superior Repeatability ( Lot-to-Lot Varation)
  • Industry Standard QSOP-20 SMT Plastic Package
  • Typical Isolation: 30 dB
  • Typical Insertion Loss: 1.5 dB
  • Low Cost
  • 1 Watt Power Handling

Description

M/A-COM’s DS58-0001 is an IC-based monolithic power divider in low cost QSOP-20 Plastic Packages. This 8-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The DS58-0001 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. SSOP-20 1. If specific reel size is required, consult factory for part number assignment. Part Number Package DS58-0001 DS58-0001-TR DS58-0001-RTR QSOP 20-Lead Plastic Package Forward Tape and Reel Reverse Tape and Reel 1. All specifications apply with a 50-ohm source and load impedance. Typical Electrical Specifications , TA = +25°C Parameters Units Min. Typ. Max. Insertion Loss Above 9.0 dB dB — 1.5 2.0 Isolation dB 20 30 — Amplitude Balance dB — 0.4 0.8 Phase Balance ° — 5 10

Ordering Information

Low Cost Eight-Way GMIC SMT Power Divider 824 - 960 MHz DS58-0001 Preliminary Specifications .0530/.0690 (1.35/1.75) -B- .3370/.3440 (8.56/8.74) 20-Lead SSOP outline dimensions (All dimensions per JEDEC No. MS-137-AD, Issue C) Dimensions in () are in mm. Unless Otherwise Noted:.XXX= .010 (.XX= 0.25)±± SSOP-20, .150 WIDE R .008/.013 (0.20/0.33) .0040/.0100 (0.10/0.25) .228/.244 (5.79/6.20) PIN 1 PIN 20 .150/.157 (3.81/3.99) 16X .008/.012 (0.20/0.30) .025(0.64) BSC. -A- -C- .016/.050 (0.40/1.27) 0- 8°° .010/.029 x 45 ° CHAMFER (0.25/0.75) .0070/.010 (0.18/0.25) ORIENTATION MARK (OPTIONAL) .010(0.25)M B M .007(0.18)M C SA MB

Low Cost Five-Way GMIC SMT Power Divider DS58-0001 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. The preliminary specifications data sheet contains typical electrical specifications which may change prior to final introduction. V1.A Absolute Maximum Ratings Parameter Absolute Maximum Input Power2 Operating Temperature Storage Temperature 1W CW -40°C to +85°C -65°C to 150°C 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W maximum. Functional Diagram Pins Typical Performance @ +25°C VSWR vs. Frequency Isolation vs. Frequency Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) -1.75 -1.5 -1.25 -0.75 -0.5 -0.25 824 858 892 926 960 Frequency MHz Insertion Loss dB 1.2 1.4 1.6 1.8 824 858 892 926 960 Frequency MHz VSWR Input Output -40 -35 -30 -25 -20 -15 -10 824 858 892 926 960 Frequency MHz Isolation dB