DS56 LUMILEDS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 33
Technical content
LUXEON® Rebel is an ultra-compact, surface-mount, high-power LED that delivers elevated standards for light output, flux density and manufacturability. Offering industry-leading flux density, lumens per package and power handling capabilities, LUXEON Rebel enables you to create never before possible lighting applications and: deliver more useable light and higher flux density optimize applications to reduce size and cost tightly pack the LEDs for color mixing applications engineer more robust applications utilize standard FR4 PCB technology simplify manufacturing through the use of surface mount technology. LUXEON® Rebel LUXEON Rebel Technology Leadership 150°C Junction Temperature Industry leading lumen perform- ance, > 100 lumens in cool white at 350mA 350mA — 1000mA drive current High efficacy, flux density and lumens per package Industry best moisture sensitivity level—JEDEC Level 1 unlimited floor life - no need for reconditioning Lead-free reflow solder JEDEC 020c compatible RoHS Compliant Autoclave compliant— JESD22 A-102 Industry best lumen maintenance—50,000 hours life at 700 mA with 70% lumen maintenance Electrically isolated thermal pad Available in all colors. power light source
LUXEON Rebel Datasheet DS56 (7/07) 2 Table of Contents
LUXEON Rebel Datasheet DS56 (7/07) 3 Product Nomenclature LUXEON Rebel is tested and binned at 350mA. The part number designation is explained as follows: L X M L - A B C D - E F G H Where: A — designates radiation pattern (value P for Lambertian) B — designates color (see LUXEON Rebel Binning and Labelling section) C — designates color variant (0 for direct colored variants, C for Cool-White, N for Neutral-White and W for Warm-White) D — designates test current (value 1 for 350 mA) E — reserved for future product offerings FGH — minimum luminous flux (lm) or radiometric power (mW) performance Therefore products tested and binned at 350 mA follow the part numbering scheme: L X M L - P x x 1 - x x x x Average Lumen Maintenance Characteristics Lifetime for solid-state lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial l ight output remaining after a specified period of time. Philips Lumileds projects that cool-white, neutral-white, warm-white, green, cyan, blue and royal-blue LUXEON Rebel products will deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. Philips Lumileds projects that red, red-orange and amber LUXEON Rebel products will deliver, on average, 70% lumen mainte- nance (B50, L70) at 50,000 hours of operation at a forward current of 350 mA. This projection is based on constant current operation with junction temperature maintained at or below 110°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems , and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achie ve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercu ry, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). Visual Appearance of LUXEON Rebel All lighted LUXEON Rebel product will provide comparable Lambertian beam performance, suitable for use with commercially available optical systems. Without power, LED die within different reels may appear visually different. Please contact your Phi lips Lumileds or Future Electronics respresentative for further information.
LUXEON Rebel Datasheet DS56 (7/07) 4 Green Cyan Warm-White Neutral-White Cool-White Blue Royal-Blue Flux Characteristics for LUXEON Rebel—Thermal Pad Temperature = 25°C Table 1. PPeerrffoorrmmaannccee aatt TTeesstt CCuurrrreenntt TTyyppiiccaall PPeerrffoorrmmaannccee aatt IInnddiiccaatteedd CCuurrrreenntt MMiinniimmuumm LLuummiinnoouuss TTyyppiiccaall LLuummiinnoouuss FFlluuxx ((llmm)) oorr FFlluuxx ((llmm)) oorr RRaaddiioommeettrriicc TTeesstt RRaaddiioommeettrriicc DDrriivvee PPoowweerr ((mmWW)) CCuurrrreenntt PPoowweerr ((mmWW)) CCuurrrreenntt CCoolloorr PPaarrtt NNuummbbeerr ΦΦVV [1] [3] ((mmAA)) ΦΦVV [2] [3] ((mmAA)) LXML-PWC1-0040 40 350 80 700 LXML-PWC1-0050 50 350 95 700 LXML-PWC1-0070 70 350 130 700 LXML-PWC1-0080 80 350 145 700 LXML-PWC1-0090 90 350 160 700 LXML-PWC1-0100 100 350 180 700 LXML-PWN1-0040 40 350 80 700 LXML-PWN1-0050 50 350 95 700 LXML-PWN1-0070 70 350 130 700 LXML-PWN1-0080 80 350 145 700 LXML-PWW1-0040 40 350 80 700 LXML-PWW1-0050 50 350 95 700 LXML-PWW1-0060 60 350 110 700 LXML-PM01-0040 40 350 80 700 LXML-PM01-0050 50 350 95 700 LXML-PM01-0070 70 350 130 700 LXML-PM01-0080 80 350 145 700 LXML-PE01-0030 30 350 65 700 LXML-PE01-0040 40 350 80 700 LXML-PE01-0060 60 350 110 700 LXML-PE01-0070 70 350 130 700 LXML-PB01-0008 8.2 350 19 700 LXML-PB01-0010 10.7 350 22 700 LXML-PB01-0013 13.9 350 27 700 LXML-PB01-0018 18.1 350 38 700 LXML-PB01-0023 23.5 350 48 700 LXML-PR01-0175 175 mW 350 325 mW 700 LXML-PR01-0225 225 mW 350 400 mW 700 LXML-PR01-0275 275 mW 350 525 mW 700 Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Philips Lumileds or Future Electronics for more information.
Table 1. Continued
- Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips
Lumileds maintains a tolerance of ± 6.5% on flux and power measurements.
- Typical luminous flux performance is when device is operated within published operating conditions.
- LUXEON Rebel products with even higher luminous flux and levels will become available in the future. Please consult
Philips Lumileds or Future Electronics for more information.
LUXEON Rebel Datasheet DS56 (7/07) 6 Optical Characteristics Lambertian LUXEON Rebel at Test Current[1] Thermal Pad Temperature = 25°C Table 2. TTyyppiiccaall TTeemmppeerraattuurree TTyyppiiccaall DDoommiinnaanntt WWaavveelleennggtthh [2] λλDD,, TTyyppiiccaall CCooeeffffiicciieenntt ooff TToottaall TTyyppiiccaall PPeeaakk WWaavveelleennggtthh [3] λλPP,, SSppeeccttrraall DDoommiinnaanntt IInncclluuddeedd VViieewwiinngg oorr CCoolloorr TTeemmppeerraattuurree [4] HHaallff--wwiiddtthh [6] WWaavveelleennggtthh AAnnggllee [7] AAnnggllee [8] CCCCTT ((nnmm)) ((nnmm//ooCC)) ((ddeeggrreeeess)) ((ddeeggrreeeess)) Cool-White 4500 K 6500 K 10,000 K N/A N/A 160 140 Neutral-White 3500 K 4100 K 4500 K N/A N/A 160 140 Warm-White 2670 K 3100 K 3500 K N/A N/A 160 140 Green 520 nm 530 nm 550 nm 30 0.05 160 140 Cyan 490 nm 505 nm 520 nm 30 0.04 160 140 Blue 460 nm 470 nm 490 nm 33 0.05 160 140 Royal-Blue [3] 440 nm 455 nm 460 nm 24 0.04 160 140 Red 620.5 nm 627 nm 645 nm 29 0.05 160 140 Red-Orange 613.5 nm 617 nm 620.5 nm 28 0.08 160 140 Amber 584.5 nm 590 nm 597 nm 28 0.10 160 140 Notes for Table 2: 1. Test current is 350 mA for all LXML-Pxx1-0xxx products. 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. Royal-Blue product is binned by radiometric power and peak wavelength rather than photometric lumens. Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. 4. CCT ±5% tester tolerance. 5. Typical CRI (Color Rendering Index) for Cool-White is 70, Neutral-White is 75 and Warm-White is 80. 6. Spectral width at ½ of the peak intensity. 7. Total angle at which 90% of total luminous flux is captured. 8. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 9. All white, green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN). 10. All red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP). 11. Cool-White, Neutral-White, Warm-White, Blue and Royal-Blue power light sources represented here are IEC825 class 2 for eye safety.
LUXEON Rebel Datasheet DS56 (7/07) 7
Electrical Characteristics
Electrical Characteristics at 350mA for LUXEON Rebel, Part Numbers LXML-Pxx1-0xxx, Thermal Pad Temperature = 25ºC Table 3. TTyyppiiccaall TTeemmppeerraattuurree TTyyppiiccaall TTyyppiiccaall CCooeeffffiicciieenntt ooff TThheerrmmaall DDyynnaammiicc FFoorrwwaarrdd RReessiissttaannccee FFoorrwwaarrdd VVoollttaaggee VVff [1] RReessiissttaannccee [2] VVoollttaaggee [3] JJuunnccttiioonn ttoo ((VV)) ((ΩΩ)) ((mmVV//ooCC)) TThheerrmmaall PPaadd ((ooCC//WW)) Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 8 and 9. 3. Measured between 25°C = T J = 110°C at If = 350 mA. Typical Electrical Characteristics at 700mA for LUXEON Rebel, Part Numbers LXML-Pxx1-0xxx, Thermal Pad Temperature = 25ºC Table 4. TTyyppiiccaall FFoorrwwaarrdd VVoollttaaggee VVff CCoolloorr ((VV)) Cool-White 3.40 Neutral-White 3.40 Warm-White 3.40 Green 3.40 Cyan 3.40 Blue 3.40 Royal-Blue 3.40 Red 3.60 Red-Orange 3.60 Amber 3.60 Notes for Table 4: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 8 and 9. 3. Measured between 25°C = T J = 110°C at If = 700 mA.
LUXEON Rebel Datasheet DS56 (7/07) 8 Absolute Maximum Ratings Table 5. PPaarraammeetteerr CCooooll--WWhhiittee // NNeeuuttrraall--WWhhiittee // WWaarrmm--WWhhiittee RReedd // RReedd--OOrraannggee // AAmmbbeerr // GGrreeeenn // CCyyaann // BBlluuee // RRooyyaall--BBlluuee DC Forward Current (mA) 1000 700 Peak Pulsed Forward Current (mA) 1000 700 Average Forward Current (mA) 1000 700 ESD Sensitivity < 8000V Human Body Model (HBM) < 8000V Human Body Model (HBM) Class 2 JESD22-A114-B Class 2 JESD22-A114-B < 400V Machine Model (MM) < 400V Machine Model (MM) Class 2 JESD22-A115-B Class 2 JESD22-A115-B LED Junction Temperature[1] 150°C 135°C Operating Case Temperature at 350mA -40°C - 135°C -40°C - 120°C Storage Temperature -40°C - 135°C -40°C - 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 See Note 2 Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. JEDEC Moisture Sensitivity Table 6. SSooaakk RReeqquuiirreemmeennttss LLeevveell FFlloooorr LLiiffee SSttaannddaarrdd TTiimmee CCoonnddiittiioonnss TTiimmee CCoonnddiittiioonnss ((hhoouurrss)) 1 unlimited ≤ 30°C / 168 85°C / 85% 85% RH + 5/-0 RH
LUXEON Rebel Datasheet DS56 (7/07) 9 Reflow Soldering Characteristics Table 7. PPrrooffiillee FFeeaattuurree LLeeaadd FFrreeee AAsssseemmbbllyy Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Time Maintained Above Temperature (TL) 217°C Time Maintained Above Time (t L) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp - Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Notes for Table 7: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. JEDEC 020c
- Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device
that can be damaged by excessive force to the lens.
- All dimensions are in millimeters.
- The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Figure 1. Package Outline Drawing.
LUXEON Rebel Datasheet DS56 (7/07) 19 Current Derating Curve for 1000mA drive current Cool-White, Neutral-White, Warm-White, Green, Cyan, Blue and Royal-Blue 200 400 600 800 1000 1200 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C IF - Forward Current mA 15°C/W 25°C/W Figure 16: Maximum forward current vs. ambient temperature, based on T JMAX = 150ºC.
LUXEON Rebel Datasheet DS56 (7/07) 23 Emitter Pocket Tape Packaging
LUXEON Rebel Datasheet DS56 (7/07) 24 Emitter Reel Packaging
LUXEON Rebel Datasheet DS56 (7/07) 25 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the tech - nical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (V F). Decoding Product Bin Labeling LUXEON Rebel Emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emit- ters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Format of Labeling for Emitters Reels of Green, Cyan, Blue, Royal-Blue, Red, Red-Orange and Amber Emitters are labeled with a three digit alphanumeric CAT code following the format below. ABC A = Flux bin (J, H, J, K etc.) B = Color bin (2, 4, 6 etc.) C = V F bin (D, E, F, G etc.) Reels of Cool-White, Neutral-White and Warm-White Emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A = Flux bin (J, H, J, K etc.) B and C = Color bin (W0, U0, V0 etc.) C = V F bin (D, E, F, G etc.)
LUXEON Rebel Datasheet DS56 (7/07) 26 Luminous Flux Bins Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performanc e. Not all bins are available in all colors. Table 8. FFlluuxx BBiinnss -- AAllll CCoolloorrss ((eexxcceepptt RRooyyaall--BBlluuee)) MMiinniimmuumm PPhhoottoommeettrriicc FFlluuxx MMaaxxiimmuumm PPhhoottoommeettrriicc FFlluuxx BBiinn CCooddee ((llmm)) ((llmm)) A 8.2 10.7 B 10.7 13.9 C 13.9 18.1 D 18.1 23.5 E 23.5 30 F3 0 4 0 G4 0 5 0 H5 0 6 0 J6 0 7 0 K7 0 8 0 L8 0 9 0 M 90 100 N 100 120 P 120 140 Q 140 160 R 160 180 S 180 200 T 200 220 U 220 240 V 240 260 W 260 280 X 280 300
LUXEON Rebel Datasheet DS56 (7/07) 27 Table 9. FFlluuxx BBiinnss -- RRooyyaall--BBlluuee OOnnllyy ((tteesstteedd aanndd bbiinnnneedd aatt 335500mmAA)) MMiinniimmuumm RRaaddiioommeettrriicc FFlluuxx MMaaxxiimmuumm RRaaddiioommeettrriicc FFlluuxx BBiinn CCooddee ((mmWW)) ((mmWW)) A 175 225 B 225 275 C 275 350 D 350 425 E 425 500 F 500 600 G 600 700 H 700 800 J 800 900 K 900 1000 Cool-White Bin Structure Figure 23: Cool-White Bin Structure.
Cool-White Bin Coordinates Cool-White LUXEON Rebel Emitters are tested and binned by x,y coordinates.
19 Color Bins, CCT Range 10,000K to 4,500K
Table 10. CCooooll--WWhhiittee BBiinn CCoooorrddiinnaatteess TTyyppiiccaall CCCCTT TTyyppiiccaall CCCCTT BBiinn CCooddee XX YY ((KK)) BBiinn CCooddee XX YY ((KK)) 0.274238 0.300667 0.318606 0.310201 Y0 0.303051 0.332708 8000 WQ 0.329393 0.320211 6000 0.307553 0.310778 0.329544 0.310495 0.282968 0.283772 0.319597 0.301303 0.282968 0.283772 0.328636 0.368952 YA 0.307553 0.310778 8000 VM 0.348147 0.385629 5300 0.311163 0.293192 0.346904 0.371742 0.289922 0.270316 0.328823 0.356917 0.301093 0.342244 0.328823 0.356917 XM 0.313617 0.354992 6700 VN 0.346904 0.371742 5300 0.314792 0.344438 0.345781 0.359190 0.303051 0.332708 0.329006 0.345092 0.303051 0.332708 0.329006 0.345092 XN 0.314792 0.344438 6700 V0 0.345781 0.359190 5300 0.316042 0.333222 0.344443 0.344232 0.305170 0.322386 0.329220 0.331331 0.305170 0.322386 0.329220 0.331331 X0 0.316042 0.333222 6700 VP 0.344443 0.344232 5300 0.317466 0.320438 0.343352 0.332034 0.307553 0.310778 0.329393 0.320211 0.307553 0.310778 0.348147 0.385629 XP 0.317466 0.320438 6700 UM 0.367294 0.400290 4750 0.319597 0.301303 0.364212 0.382878 0.311163 0.293192 0.346904 0.371742 0.313617 0.354992 0.346904 0.371742 WM 0.328636 0.368952 6000 UN 0.364212 0.382878 4750 0.328823 0.356917 0.362219 0.371616 0.314792 0.344438 0.345781 0.359190 0.314792 0.344438 0.345781 0.359190 WN 0.328823 0.356917 6000 U0 0.362219 0.371616 4750 0.329006 0.345092 0.359401 0.355699 0.316042 0.333222 0.344443 0.344232 0.316042 0.333222 0.344443 0.344232 W0 0.329006 0.345092 6000 UP 0.359401 0.355699 4750 0.329220 0.331331 0.357079 0.342581 0.317466 0.320438 0.343352 0.332034 0.317466 0.320438 WP 0.329220 0.331331 6000 0.329393 0.320211 0.318606 0.310201 Note for Table 10: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 28
LUXEON Rebel Datasheet DS56 (7/07) 29 Neutral-White Bin Structure Neutral-White LUXEON Rebel Emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 4,500K to 3,500K Table 11. NNeeuuttrraall--WWhhiittee BBiinn CCoooorrddiinnaatteess TTyyppiiccaall CCCCTT TTyyppiiccaall CCCCTT BBiinn CCooddee XX YY ((KK)) BBiinn CCooddee XX YY ((KK)) 0.367294 0.400290 0.378264 0.382458 TM 0.385953 0.412995 4300 S0 0.392368 0.390932 3950 0.381106 0.393747 0.387071 0.373899 0.364212 0.382878 0.374075 0.365822 0.364212 0.382878 0.374075 0.365822 TN 0.381106 0.393747 4300 SP 0.387071 0.373899 3950 0.378264 0.382458 0.382598 0.359515 0.362219 0.371616 0.370582 0.351953 0.362219 0.371616 0.402270 0.422776 T0 0.378264 0.382458 4300 RM 0.420940 0.432618 3650 0.374075 0.365822 0.414776 0.416097 0.359401 0.355699 0.396279 0.403508 0.359401 0.355699 0.396279 0.403508 TP 0.374075 0.365822 4300 RN 0.414776 0.416097 3650 0.370582 0.351953 0.408593 0.399525 0.357079 0.342581 0.392368 0.390932 0.385953 0.412995 0.392368 0.390932 SM 0.402270 0.422776 3950 R0 0.408593 0.399525 3650 0.396279 0.403508 0.402113 0.382156 0.381106 0.393747 0.387071 0.373899 0.381106 0.393747 0.387071 0.373899 SN 0.396279 0.403508 3950 RP 0.402113 0.382156 3650 0.392368 0.390932 0.396564 0.367284 0.378264 0.382458 0.382598 0.359515 Note for Table 11: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. Figure 24: Neutral-White Bin Structure.
Warm-White LUXEON Rebel Emitters are tested and binned by x,y coordinates. 16 Color Bins, CCT Range 3,500K to 2,670K Table 12. WWaarrmm--WWhhiittee BBiinn CCoooorrddiinnaatteess TTyyppiiccaall CCCCTT TTyyppiiccaall CCCCTT BBiinn CCooddee XX YY ((KK)) BBiinn CCooddee XX YY ((KK)) 0.420940 0.432618 0.453820 0.445980 QM 0.438458 0.440399 3375 NM 0.470507 0.450832 2950 0.431186 0.423386 0.461404 0.433334 0.414776 0.416097 0.445639 0.428680 0.414776 0.416097 0.445639 0.428680 QN 0.431186 0.423386 3375 NN 0.461404 0.433334 2950 0.423956 0.406472 0.452512 0.416241 0.408593 0.399525 0.437578 0.411632 0.408593 0.399525 0.437578 0.411632 Q0 0.423956 0.406472 3375 N0 0.452512 0.416241 2950 0.416487 0.389001 0.443600 0.399111 0.402113 0.382156 0.429373 0.394281 0.402113 0.382156 0.429373 0.394281 QP 0.416487 0.389001 3375 NP 0.443600 0.399111 2950 0.409996 0.373814 0.435591 0.383714 0.396564 0.367284 0.422124 0.378952 0.438458 0.440399 0.470507 0.450832 PM 0.453820 0.445980 3150 MM 0.486648 0.454191 2760 0.445639 0.428680 0.476733 0.436634 0.431186 0.423386 0.461404 0.433334 0.431186 0.423386 0.461404 0.433334 PN 0.445639 0.428680 3150 MN 0.476733 0.436634 2760 0.437578 0.411632 0.467132 0.419632 0.423956 0.406472 0.452512 0.416241 0.423956 0.406472 0.452512 0.416241 P0 0.437578 0.411632 3150 M0 0.467132 0.419632 2760 0.429373 0.394281 0.457663 0.402866 0.416487 0.389001 0.443600 0.399111 0.416487 0.389001 0.443600 0.399111 PP 0.429373 0.394281 3150 MP 0.457663 0.402866 2760 0.422124 0.378952 0.448994 0.387515 0.409996 0.373814 0.435591 0.383714 Note for Table 12: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 30 Figure 25: Warm-White Bin Structure.
LUXEON Rebel Datasheet DS56 (7/07) 31 Color Bins Green, Cyan and Blue LUXEON Rebel Emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Green Emitters Table 13. MMiinniimmuumm DDoommiinnaanntt WWaavveelleennggtthh MMaaxxiimmuumm DDoommiinnaanntt WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 1 520 525 2 525 530 3 530 535 4 535 540 5 540 545 6 545 550 Dominant Wavelength Bin Structure for Cyan Emitters Table 14. MMiinniimmuumm DDoommiinnaanntt WWaavveelleennggtthh MMaaxxiimmuumm DDoommiinnaanntt WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 1 490 495 2 495 500 3 500 505 4 505 510 5 510 515 6 515 520 Dominant Wavelength Bin Structure for Blue Emitters Table 15. MMiinniimmuumm DDoommiinnaanntt WWaavveelleennggtthh MMaaxxiimmuumm DDoommiinnaanntt WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 1 460 465 2 465 470 3 470 475 4 475 480 5 480 485 6 485 490 Royal-Blue Luxeon Rebel Emitters are tested and binned for peak wavelength. Peak Wavelength Bin Structure for Royal-Blue Emitters Table 16. MMiinniimmuumm PPeeaakk WWaavveelleennggtthh MMaaxxiimmuumm PPeeaakk WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 3 440 445 4 445 450 5 450 455 6 455 460 7 460 465 8 465 470
LUXEON Rebel Datasheet DS56 (7/07) 32 Red, Red-Orange and Amber LUXEON Rebel Emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Red Emitters Table 17. MMiinniimmuumm DDoommiinnaanntt WWaavveelleennggtthh MMaaxxiimmuumm DDoommiinnaanntt WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 4 620.5 631.0 5 631.0 645.0 Dominant Wavelength Bin Structure for Red-Orange Emitters Table 18. MMiinniimmuumm DDoommiinnaanntt WWaavveelleennggtthh MMaaxxiimmuumm DDoommiinnaanntt WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 2 613.5 620.5 Dominant Wavelength Bin Structure for Amber Emitters Table 19. AAmmbbeerr DDoommiinnaanntt WWaavveelleennggtthh BBiinnss MMiinniimmuumm DDoommiinnaanntt WWaavveelleennggtthh MMaaxxiimmuumm DDoommiinnaanntt WWaavveelleennggtthh BBiinn CCooddee ((nnmm)) ((nnmm)) 1 584.5 587.0 2 587.0 589.5 4 589.5 592.0 6 592.0 594.5 7 594.5 597.0 Forward Voltage Bins Table 20 lists minimum and maximum VF bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 20. VVFF BBiinnss MMiinniimmuumm FFoorrwwaarrdd VVoollttaaggee MMaaxxiimmuumm FFoorrwwaarrdd VVoollttaaggee BBiinn CCooddee ((VV)) ((VV)) A 2.31 2.55 B 2.55 2.79 C 2.79 3.03 D 3.03 3.27 E 3.27 3.51 F 3.51 3.75 G 3.75 3.99
©2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.luxeon.com www.lumiledsfuture.com For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or askluxeon@futureelectronics.com Europe: 00 800 443 88 873 or luxeon.europe@futureelectronics.com Asia: 800 5864 5337 or lumileds.asia@futureelectronics.com Company Information Philips Lumileds Lighting Company is a world class supplier of Light Emitting Diodes (LEDs) and produces billions of LEDs annually. Philips Lumileds is a fully integrated supplier producing core LED material in all three base colors (red, green, blue) and white. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands as well as production capabilities in San Jose, Penang Malaysia and Singapore. Founded in 1999, Philips Lumileds is the high-flux LED technology leader and is dedicated to bridging the gap between solid-state LED technology and the lighting world. Philips Lumileds technologies, LEDs and systems are enabling new applications and markets in the lighting world. Philips Lumileds may make process or materials changes affecting the perform- ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders.