DS56-0001 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Small Size, Low Profile
- Superior Repeatability (Lot-to-lot Variation)
- Industry Standard SOW-16 SMT Plastic Package
- Typical Isolation: 25 dB
- Typical Insertion Loss: 0.3 dB
- Low Cost
- 1 Watt Power Handling
- SOW-16 Package
Description
M/A-COM’s DS56-0001 is an IC-based monolithic power divider in a low cost SOW-16 plastic package. This 6-way power divider is ideally suited for applica- tions where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The DS56-0001 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability.
Ordering Information
DS56-0001-TR 1000 piece reel DS56-0001SAM Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Diagram1 Pin Configuration Pin No. Function Pin No. Function
1 RF3 (OUT) 9 GND
2 GND 10 GND
3 RF2 (OUT) 11 GND
4 GND 12 RF6 (OUT)
5 RF1 (OUT) 13 GND
6 GND 14 RF5 (OUT)
7 RF IN 15 GND
8 GND 16 RF4 (OUT)
- Pins 2, 4, 6, 8, 9, 10, 11, 13, and 15 must be DC and RF grounded.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Six-Way SMT Power Divider 824 - 960 MHz Rev. V5 DS56-0001 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss Above 7.8 dB dB — 1.3 1.5 Isolation dB 20 25 — Amplitude Balance dB — 0.2 0.5 Phase Balance Deg. — 6 8 Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power4 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to 150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Six-Way SMT Power Divider 824 - 960 MHz Rev. V5 DS56-0001 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Isolation vs. Frequency VSWR vs. Frequency Typical Performance Curves Insertion Loss vs. Frequency
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Six-Way SMT Power Divider 824 - 960 MHz Rev. V5 DS56-0001 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. SOW-16† † Reference Application Note M538 for lead-free solder reflow recommendations.