DS56-0001 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Small Size, Low Profile
- Superior Repeatability (Lot-to-lot Variation)
- Industry Standard SOW-16 SMT Plastic Package
- Typical Isolation: 25 dB
- Typical Insertion Loss: 0.3 dB
- Low Cost
- 1 Watt Power Handling
Description
M/A-COM’s DS56-0001 is an IC-based monolithic power divider in a low cost SOW-16 plastic package. This 6-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The DS56-0001 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. SOW-16 1. If specific reel size is required, consult factory for part number assignment. Part Number Package DS56-0001 DS56-0001-TR DS56-0001-RTR SOW 16-Lead Plastic Packa ge Forward Tape and Reel Reverse Tape and Reel 1. All specifications apply with a 50-ohm source and load impedance. Typical Electrical Specifications , TA= +25ºC Parameters Units Min. Typ. Max. Insertion Loss Above 7.0 dB dB — 1.3 1.5 Isolation dB 20 25 — Amplitude Balance dB — 0.2 0.5 Phase Balance ° — 6 8
Ordering Information
Low Cost Six-Way SMT Power Divider 824 - 960 MHz DS56-0001 .013-.020 TYP (0.33-0.51) .0040-.0118 (0.10-0.30) .394-.419 (10.00-10.65) Pin 16 Orientation Mark .010(0.25) M B M -B- .3977-.4133 (10.10-10.50) -A- 0.050(1.27) BSC. .0926-.1043 (7.40-7.60) .010(0.25) M C A M B S 16-Lead SOP outline dimensions Wide body (.300) (All dimensions per JEDEC No. MS-013-AA, Issue C) Dimensions in ( ) are in mm. 0-8 .010-.029 x
45 Chamfer
(0.25-0.75) .016-.050 (0.40-1.27) .0091-.0125 (0.23-0.32) -C- Pin 1 Unless Otherwise Noted: .xxx = 0.010 (.xx = 0.25) .004 (0.10)
Six-Way SMT Power Divider DS56-0001 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V4.00 -0.5 -1.0 -1.5 -2.0 824 858 892 926 960 Frequency (MHz) INSERTION LOSS (dB) -10 -20 -30 -40 ISOLATION (dB) Frequency (MHz) 824 858 892 926 960 Absolute Maximum Ratings Parameter Absolute Maximum Input Power Operating Temperature Storage Temperature 1W CW -40°C to +85°C -65°C to 150°C 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W maximum. Functional Diagram 3. Pins 2, 4, 6, 8, 9, 10, 11, 13, and 15 must be DC and RF grounded. Typical Performance @ +25°C VSWR vs. FrequencyInsertion Loss vs. Frequency Recommended PCB Configuration (Dimensions in Inches) RF 6 (OUT) RF 5 (OUT) RF 4 (OUT)RF 3 (OUT) RF 2 (OUT) RF 1 (OUT) RF IN GND GND GND GND GNDGND GND GND GND TYP. TYP. .016 DIA. PLATED THRU (21X) .050 DIA. PLATED THRU (3X) RF 6 RF 5 RF 4RF 3 RF 2 RF 1 RF IN .067 TYP. .030 TYP..041 .428 .335 .093 Isolation vs. Frequency Frequency (MHz) 2.0 1.8 1.6 1.4 1.2