DS55-0004 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Small Size, Low Profile
- Superior Repeatability (Lot-to-Lot Variation)
- Industry Standard SOIC-16 SMT Plastic Package
- Typical Isolation: 26 dB
- Typical Insertion Loss: 0.7 dB
- Low Cost
- 1 Watt Power Handling
- SOIC-16 Package
Description
M/A-COM’s DS55-0004 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-16 plastic package. This 5-way power divider is ideally suited for applications where PCB real estate is at a premium and part count re- duction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The DS55-0004 is fabricated using a passive- integrated circuit process. The process features full-chip passivation for increased performance and reliability.
Ordering Information
DS55-0004-TR 1000 piece reel DS55-0004-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Block Diagram Pin Configuration Pin No. Function Pin No. Function
1 GND 9 GND
2 GND 10 GND
3 GND 11 RF5
4 RF2 12 GND
5 GND 13 RF4
6 RF1 14 GND
7 GND 15 RF3
8 RF IN 16 GND
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Five-Way GMIC SMT Power Divider 824-896 MHz Rev. V3 DS55-0004 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = +25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss Above 7.0dB dB — 0.7 1.2 Isolation dB 21 26 — VSWR Input — — 1.4:1 1.6:1 VSWR Output — — 1.2:1 1.5:1 Amplitude Balance dB — 0.2 0.6 Phase Balance ° — 5 10 Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power3 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With Internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. VSWR vs. Frequency Isolation vs. Frequency Phase Balance vs. Frequency (Relative RF1) Typical Performance Curves Insertion Loss vs. Frequency (Dashed lines show amplitude balance window)
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Five-Way GMIC SMT Power Divider 824-896 MHz Rev. V3 DS55-0004 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. † Reference Application Note M538 for lead-free solder reflow recommendations. SOIC-16†