DS54-0006 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Low Cost
  • Small Size and Low Profile
  • Excellent Repeatability (Lot-to-Lot Variation)
  • Typical Isolation: 23 dB
  • Typical Amplitude Balance: 0.8 dB
  • Typical Insertion Loss: 1.4 dB
  • SOIC-16 Package

Description

M/A-COM’s DS54-0006 is an IC-based monolithic power splitter/combiner in a low cost SOIC-16 plastic package. This device is ideally suited for applica- tions where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infra- structure, portables, and peripheral devices (PCMCIA cards) for wireless standards such as PCS, PCN, DECT, PHS, and DCS-1800. Available in Tape and Reel. The DS54-0006 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability.

Ordering Information

DS54-0006-TR 1000 piece reel DS54-0006-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Block Diagram1 Pin Configuration Pin No. Function Pin No. Function

1 GND 9 GND

2 GND 10 GND

3 GND 11 RF 4 OUT

4 RF 2 OUT 12 GND

5 GND 13 RF 3 OUT

6 RF 1 OUT 14 GND

7 GND 15 GND

8 RF IN 16 GND

  1. All unused pins must be RF and DC grounded.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Rev. V4 DS54-0006 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss above 6.0 dB dB — 1.4 1.7 Isolation 1700 - 2000 dB 18 23 — VSWR Output Input 1700 – 1880 Input 1880 – 2000 1.2:1 1.6:1 1.4:1 1.7:1 2.0:1 1.7:1 Amplitude Balance dB — 0.8 1.3 Phase Balance Deg — 5 10 Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power 4 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves @25ºC Amplitude Balance vs. Frequency Insertion Loss vs. Frequency

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Rev. V4 DS54-0006 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Isolation vs. Frequency Phase Balance vs. Frequency Typical Performance Curves @25ºC I/P VSWR vs. Frequency O/P VSWR vs. Frequency

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Rev. V4 DS54-0006 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. SOIC-16† † Reference Application Note M538 for lead-free solder reflow recommendations.