DS54-0005 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Low Cost
  • Small Size and Low Profile
  • Industry Standard SOIC-8 SMT Plastic Package
  • Superior Repeatability (Lot-to-Lot Variation)
  • Typical Insertion Loss: 0.8 dB
  • Typical Isolation: 24 dB
  • Typical Amplitude Balance: 0.3 dB

Description

M/A-COM’s DS54-0005 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-8 plastic package. This 4-way power divider is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables, and periph- eral devices (PCMCIA cards) for wireless standards such as GSM, AMPS, CDPD, RAM, and ARDIS. Available in tape and reel. The DS54-0005 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. SOIC-8 1. If specific reel size is required, consult factory for part number assignment. Part Number Package DS54-0005 DS54-0005-TR DS54-0005-RTR SOIC 8-Lead Plastic Packa ge Forward Tape and Reel Reverse Tape and Reel 1. All specifications apply with a 50-ohm source and load impedance. Typical Electrical Specifications , TA= +25ºC Parameters Units Min. Typ. Max. Insertion Loss Above 6.0 dB dB — 0.8 1.1 Isolation dB 20 24 — VSWR Input Output 1.4:1 1.25:1 1.7:1 1.5:1 Amplitude Balance dB — 0.3 0.6 Phase Balance ° — 3 6

Ordering Information

Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz DS54-0005 Preliminary Specifications

Low Cost Three-Way GMIC SMT Power Divider DS54-0005 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. The preliminary specifications data sheet contains typical electrical specifications which may change prior to final introduction. V1.00 Absolute Maximum Ratings Parameter Absolute Maximum Input Power Operating Temperature Storage Temperature 1W CW -40°C to +85°C -65°C to 150°C 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W maximum. Functional Diagram 3 Pins 2, 6, and 7 must be DC and RF grounded. Typical Performance @ +25°C -0.75 -0.5 -0.25 824 858 892 926 960 Frequency MHz Insertion Loss dB 1. 2 1. 4 1. 6 1. 8 824 858 892 926 960 Frequency M Hz VSWR I nput Output VSWR vs. Frequency -10 824 858 892 926 960 Frequency M Hz Phase, degrees RF1 RF2 RF3 RF4 Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) Phase Balance vs. Frequency (Relative to RF1) Is o la tio n vs. Fr equency -40 -35 -30 -25 -20 -15 -10 824 858 892 926 960 Fr equency M Hz Isolation dB RF1- RF2 RF2- RF3 RF3- RF4 RF1- RF4 Isolation vs. Frequency Recommended PIN Configuration