DS54-0005 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Low Cost
  • Small Size and Low Profile
  • Superior Repeatability (Lot-to-Lot Variation)
  • Typical Insertion Loss: 0.8 dB
  • Typical Isolation: 24 dB
  • Typical Amplitude Balance: 0.3 dB
  • SOIC-8 Package

Description

M/A-COM’s DS54-0005 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-8 plastic package. This 4-way power divider is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables, and peripheral devices (PCMCIA cards) for wireless standards such as GSM, AMPS, CDPD, RAM, and ARDIS. Available in tape and reel. The DS54-0005 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for in creased performance and reliability.

Ordering Information

DS54-0005-TR 2000 piece reel Note: Reference Application Note M513 for reel size information. Functional Diagram Pin Configuration Pin No. Function Pin No. Function

1 RF 1 5 RF 3

2 RF IN 6 GND

3 GND 7 GND

4 RF 4 8 RF 2

  1. Pins 2, 6, and 7 must be DC and RF grounded.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 DS54-0005 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = +25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss Above 6.0 dB dB — 0.8 1.1 Isolation dB 20 24 — VSWR Input Output 1.4:1 1.25:1 1.7:1 1.5:1 Amplitude Balance dB — 0.3 0.6 Phase Balance ° — 3 6 Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. RF OUT RF OUT RF OUT RF IN PLATED THRU PLATED THRU RF OUT .244 .072 .000 .030 TYP. .01612X ° .0502X °

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 DS54-0005 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. VSWR vs. Frequency Isolation vs. Frequency Phase Balance vs. Frequency (Relative to RF1) Typical Performance Curves Insertion Loss vs. Frequency (Dashed lines show amplitude balance window)

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 DS54-0005 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations.