DS53-0005 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Small Size and Low Profile
  • SOIC-8 Package
  • Excellent Amplitude and Phase Balance
  • Superior Repeatability
  • Typical Insertion Loss: 1.0 dB
  • Typical Isolation: 18 dB
  • 1 Watt Power Handling

Description

M/A-COM’s DS53-0005 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-8 plastic package. This 3-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low co st are required. Typi- cal applications include personal communication systems and other communication applications where size and PCB real estate are at a premium. Available in tape and reel. The DS53-0005 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability.

Ordering Information

DS53-0005-TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Functional Diagram Electrical Specifications: TA = 25°C1 Parameter Units Min Typ Max Insertion Loss above 4.8 dB dB — 1.0 1.4 Isolation dB 12 18 — VSWR Input Ratio — 1.8:1 2.0:1 Amplitude Balance dB — 0.3 0.6 Phase Balance Deg. — 7 14 1. All specifications apply with a 50-ohm source and load impedance. Pin Configuration Pin No. Function Pin No. Function

1 GND 5 RF3

2 RF IN 6 GND

3 GND 7 RF2

4 GND 8 RF1

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Three-Way GMIC SMT Power Divider, 1850 - 1990 MHz Rev. V4 DS53-0005 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power 4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125W maximum. Recommended PIN Configuration Typical Performance Curves Insertion Loss (Dashed lines show amplitude balance window) VSWR Isolation 0.0 0.5 1. 0 1. 5 2.0 1 850 1 888 1 925 1 963 2000 Fre qu e n cy (MHz ) Insertion Loss (dB) 1. 0 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 1. 8 1. 9 2.0 18 50 18 8 8 19 2 5 19 6 3 2 0 0 0 Fre qu e n cy (MHz ) VSWR 1 850 1 888 1 925 1 963 2000 F requency (MHz) Isolation (dB) RF1 -RF2 RF2-RF3 RF1 -RF3

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Three-Way GMIC SMT Power Divider, 1850 - 1990 MHz Rev. V4 DS53-0005 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves Phase Balance (Relative to RF1) -1 0 1 850 1 888 1 925 1 963 2000 Fre qu e n cy (MHz ) Phase (degrees) RF1 RF2 RF3 SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations.