DS52-0014 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Small Size and Low Profile
- Typical Insertion Loss: 0.6 dB
- Typical Amplitude Balance: 0.2 dB
- 1 Watt Power Handling
- SOT-26 Package
Description
M/A-COM’s DS52-0014 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. The DS52-0014 is fabricated using a passive inte- grated circuit process. The process features full-chip passivation for increased performance and reliability.
Ordering Information
DS52-0014-TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Functional Diagram Pin Configuration Pin No. Function Pin No. Function
1 RF1 (OUT) 4 GND
2 GND 5 GND
3 RF2 (OUT) 6 RF IN
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Rev. V4 DS52-0014 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C1 Parameter Units Min Typ Max Insertion Loss Above 3.0 dB dB — 0.6 0.8 Isolation dB 16 20 — VSWR Input RF1, RF2 Outputs Ratio Ratio 1.2:1 1.1:1 1.4:1 1.3:1 Amplitude Balance dB — 0.2 0.4 Phase Balance Deg. — 1.5 3.0 Test Conditions 1700 - 2000 MHz 1700 - 2000 MHz 1700 - 2000 MHz 1700 - 2000 MHz 1700 - 2000 MHz 1700 - 2000 MHz Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic dis- charge (ESD) and can be damaged by static elec- tricity. Proper ESD c ontrol techniques should be used when handling these devices." 1. All specifications apply with a 50-ohm source and load impedance. 321 .046 .022 Typ. .006 Typ. .056 .020 Typ. Plated Thru Hole
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Rev. V4 DS52-0014 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Amplitude Balance vs. Frequency VSWR vs. Frequency Isolation vs. Frequency Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency Phase Balance vs. Frequency
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Rev. V4 DS52-0014 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. † Reference Application Note M538 for lead-free solder reflow recommendations. SOT-26†