DS52-0007 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Small Size and Low Profile
  • Industry Standard SOT-25 SMT Plastic Package
  • Typical Isertion Loss: 1.0 dB
  • Typical Amplitude Balance 0.1 dB
  • 1 Watt Power Handling

Description

M/A- COM’s DS52-0007 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-25 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. The DS52-0007 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Typical Electrical Specifications1, TA = +25°C Parameter Units Min Typ Max Insertion Loss above 3.0dB dB — 1.0 1.1 Isolation dB 15 22 — VSWR RF Input RF1, RF2 Outputs 1.6 : 1 1.3 : 1 1.8 : 1 1.5 : 1 Amplitude Balance dB — 0.1 0.25 Phase Balance Degrees — 2.0 4.0 1. All specifications apply with a 50-Ohm source and load impedance. Low Cost Two-Way GMIC SMT Power Divider 2200 - 2500 MHz DS52-0007

Ordering Information

DS52-0007 SOT-25Lead Plastic Package DS52-0007-TR Forward Tape and Reel1 DS52-0007-RTR Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. SOT-25 All lower dimensions are in millimeters

Low Cost Two-Way GMIC SMT Power Divider — 2200 - 2500MHz DS52-0007 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V2.00 S1502 A 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W Maximum. Absolute Maximum Ratings1 Parameter Absolute Maximum Input Power2 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Recommended PCB Configuration Typical Performance @ +25°C 2200 2275 2350 2425 2500 FREQUENCY (MHz) PHASE , DEGREES Phase Balance Vs Frequency Relative to RF1 Functional Diagram VSWR Vs Frequency 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2200 2275 2350 2425 2500 FREQUENCY (dB) VSWR (Ratio) Isolation Vs Frequency -26 -24 -22 -20 -18 -16 -14 2200 2275 2350 2425 2500 FREQUENCY (MHz) ISOLATION (dB ) Insertion Loss Vs Frequency -1.5 -0.5 2200 2275 2350 2425 2500 FREQUENCY(MHz) INSERTION LOSS (dB) CIRCUIT MATERIAL: FR-4, .016 THICK (Dimensions in Inches) INPUT OUTPUT