DS52-0005 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Small Size and Low Profile
  • Industry Standard SOIC-8 SMT Plastic Package
  • Superior Repeatability
  • Excellent Amplitude Balance: 0.05 dB Typical
  • Excellent Insertion Loss: 0.3 dB Typical
  • Low Cost
  • DCS-1800 Frequency Coverage

Description

M/A-COM’s DS52-0005 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power splitter is ideally suited for applications where small size, low profile and low cost, without sacrificing performance are required. Typical applications include base station , portables and PCMCIA cards for DCS-1800 European applications. Available in tape and reel. The DS52-0005 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Typical Electrical Specifications1, TA = +25°C Parameter Units Min Typ Max Insertion Loss Above 3.0dB dB — 0.3 0.5 Isolation dB 15 20 — Amplitude Balance dB — 0.1 0.15 Phase Balance ° — 2 4

Ordering Information

DS52-0005 SOIC-8 Lead Plastic Package DS52-0005-TR Forward Tape and Reel1 DS52-0005-RTR Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. SOIC-8 1. All specifications apply with a 50-Ohm source and load impedance.

/G6e North America: Tel. (800) 366-2266, Fax (800) 618-8883 /G6e Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 /G6e Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Specifications subject to change without notice. Visit www.macom.com for additional data sheets and product information. V 3.0 Low Cost Two-Way SMT Power Divider, 1700-1900 MHz DS52-0005 1. Exceeding these limits may cause permanent damage. 2. With Internal load dissipation of 0.125 W maximum. Absolute Maximum Ratings1 Parameter Absolute Maximum Input Power² 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Functional Diagram Typical Performance @ +25°C 2200 2275 2350 2425 2500 FREQUENCY (MHz) PHASE, DEGREES -26 -24 -22 -20 -18 -16 -14 2200 2275 2350 2425 2500 FREQUENCY (MHz) ISOLATION (dB) -1.5 -0.5 2200 2275 2350 2425 2500 FREQUENCY(MHz) INSERTION LOSS (dB) 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2200 2275 2350 2425 2500 FREQUENCY (dB) VSWR (Ratio) Insertions Loss vs. Frequency Isolation vs. Frequency VSWR vs. Frequency Recommended PCB Configuration (Dimensions in Inches) Phase Balance vs. Frequency Relative to RF1