DS4E-ML2-DC5V

DS1E-M-DC12V NAIS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

35.24 1.387 9.9 .390 9.8 .386 DS1E .590 9.9 .390 9.8 .386 DS2E .787 9.9 .390 9.8 .386

FEATURES

• High sensitivity: 200 mW pick-up power 100 mW pick-up power types available
• Latching types available
• High switching capacity: 60 W, 125 V A
• High breakdown voltage: 1,500 V FCC surge between open contacts 1,000 V AC between open contacts
• DIP-1C type can be used with 14 pin IC socket 2C type can be used with 16 pin IC socket, 4C type can be used with 2 sets of 14 pin IC sockets
• Gold-cap silver palladium types available for 2 Form C type
• Bifurcated contacts are standard SPECIFICATIONS Contact * Gold capped silver-palladium contact also available for 2 Form C 10 operations at

0.1 A 50 V DC resistive

Coil (polarized) (at 20 C 68 * For 1 Form C high sensitive types. Characteristics (at 20 C 68 Arrangement 1 Form C, 2 Form C, 4 Form C Initial contact resistance, max. (By voltage drop 6 V DC 1 A) 50 m W Contact material Gold-clad sliver Rating (resistive) Max. switching power 60 W, 125 VA Max. switching voltage

220 V DC, 250 V AC

Max. switching current

2 A DC, AC

Max. carrying current 3 A DC, AC Expected life (min. operations) Mechanical (at 600 cpm) (1 Form C 2 coil latching type: 10 Electrical

2 A 30 VDC resistive 5

M type Single side stable Minimum operating power Approx. 200 mW Nominal operating power Approx. 400 mW 1 coil latching Minimum set and reset power Approx. 90 mW Nominal set and reset power Approx. 180 mW 2 coil latching Minimum set and reset power Approx. 180 mW Nominal set and reset power Approx. 360 mW S type Single side stable Minimum operating power Approx. 100 mW (128 mW)* Nominal operating power Approx. 200 mW 1 coil latching Minimum set and reset power Approx. 45 mW (58 mW)* Nominal set and reset power Approx. 90 mW 2 coil latching Minimum set and reset power Approx. 90 mW (115 mW)* Nominal set and reset power Approx. 180 mW Max. operating speed 20 cpm at rated load 50 cps at low level load Initial insuration resistance* Min. 100 M W (at 500 V DC) Initial break- down volt- age* Type of relay (DS1-S type) (Other types) Between open contacts 500 Vrms 1,000 Vrms Between contacts sets — 1,000 Vrms Between contacts and coil1,000 Vrms 1,500 Vrms FCC surge voltage between contacts and coil 1,500 V (Expect DS1-S type) Operate time* (at nominal voltage) Approx. 3 ms Release time (without diode)* (at nominal voltage) Approx. 2 ms Set time* (at nominal voltage) Approx. 3 ms Reset time* (at nominal voltage) Approx. 3 ms Temperature rise (at nominal voltage, Contact current: 2A) Max. 65 C Shock resistance Functional* 1C, 2C:Min. 490 m/s {50 G} 4C:Min. 294 m/s {30 G} Destructive* Min. 980 m/s {100 G} Vibration resistance Functional* 10 to 55 Hz at double amplitude of 3.3 mm Destructive 10 to 55 Hz at double amplitude of 5 mm Conditions for operation, transport and storage* (Not freezing and condens- ing at low temperature) Ambient temp. –40 C to +70 C –40 F to +158 F Humidity 5 to 85% R.H. Unit weight 1 Form C Approx. 3.2g .11oz 2 Form C Approx. 4g .14oz 4 Form C Approx. 7g .25oz FCC (Federal Communication Commission) re- quests following standard as Breakdown Voltage specification. 10 ms 1500V 750V 160 ms Remarks * Specifications will vary with foreign standards certification ratings. Measurement at same location as "Initial breakdown voltage" section Detection current: 10 mA Excluding contact bounce time Half-wave pulse of sine wave: 11ms; detection time: 10 m s Half-wave pulse of sine wave: 6ms Detection time: 10 m s Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) mm inch

• Telecommunication equipment
• Office equipment
• Computer peripherals
• Security equipment
• Measuring instrumentation

ORDERING INFORMATION

1: 1 Form C 2: 2 Form C 4: 4 Form C *Reverse polarity types available (add suffix-R). Standard packing: Carton: 50 pcs.; Case: 500 pcs. E M R *L2 DC 48 V Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V Classification of type E: Amber sealed type Sensitivity M: 400 mW nominal operating power S: 200 mW nominal operating power Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching TYPES Single side stable 1 coil latching 2 coil latching Notes: 1. Reverse polarity types available (add suffix-R). 2. Standard packing: carton: 50 pcs.; case: 500 pcs. Nominal Voltage, V DC Part No.

1 Form C 2 Form C 4 Form C

M (400 mW) type 1.5 DS1E-M-DC1.5V DS2E-M-DC1.5V DS4E-M-DC1.5V

3 DS1E-M-DC3V DS2E-M-DC3V DS4E-M-DC3V

5 DS1E-M-DC5V DS2E-M-DC5V DS4E-M-DC5V

6 DS1E-M-DC6V DS2E-M-DC6V DS4E-M-DC6V

9 DS1E-M-DC9V DS2E-M-DC9V DS4E-M-DC9V

12 DS1E-M-DC12V DS2E-M-DC12V DS4E-M-DC12V

24 DS1E-M-DC24V DS2E-M-DC24V DS4E-M-DC24V

48 DS1E-M-DC48V DS2E-M-DC48V DS4E-M-DC48V

S (200 mW) type 1.5 DS1E-S-DC1.5V DS2E-S-DC1.5V DS4E-S-DC1.5V

3 DS1E-S-DC3V DS2E-S-DC3V DS4E-S-DC3V

5 DS1E-S-DC5V DS2E-S-DC5V DS4E-S-DC5V

6 DS1E-S-DC6V DS2E-S-DC6V DS4E-S-DC6V

9 DS1E-S-DC9V DS2E-S-DC9V DS4E-S-DC9V

12 DS1E-S-DC12V DS2E-S-DC12V DS4E-S-DC12V

24 DS1E-S-DC24V DS2E-S-DC24V DS4E-S-DC24V

48 DS1E-S-DC48V DS2E-S-DC48V DS4E-S-DC48V

Nominal Voltage, V DC Part No. M (180 mW) type 1.5 DS1E-ML-DC1.5V DS2E-ML-DC1.5V DS4E-ML-DC1.5V

3 DS1E-ML-DC3V DS2E-ML-DC3V DS4E-ML-DC3V

5 DS1E-ML-DC5V DS2E-ML-DC5V DS4E-ML-DC5V

6 DS1E-ML-DC6V DS2E-ML-DC6V DS4E-ML-DC6V

9 DS1E-ML-DC9V DS2E-ML-DC9V DS4E-ML-DC9V

12 DS1E-ML-DC12V DS2E-ML-DC12V DS4E-ML-DC12V

24 DS1E-ML-DC24V DS2E-ML-DC24V DS4E-ML-DC24V

48 DS1E-ML-DC48V DS2E-ML-DC48V DS4E-ML-DC48V

S (90 mW) type 1.5 DS1E-SL-DC1.5V DS2E-SL-DC1.5V DS4E-SL-DC1.5V

3 DS1E-SL-DC3V DS2E-SL-DC3V DS4E-SL-DC3V

5 DS1E-SL-DC5V DS2E-SL-DC5V DS4E-SL-DC5V

6 DS1E-SL-DC6V DS2E-SL-DC6V DS4E-SL-DC6V

9 DS1E-SL-DC9V DS2E-SL-DC9V DS4E-SL-DC9V

12 DS1E-SL-DC12V DS2E-SL-DC12V DS4E-SL-DC12V

24 DS1E-SL-DC24V DS2E-SL-DC24V DS4E-SL-DC24V

48 DS1E-SL-DC48V DS2E-SL-DC48V DS4E-SL-DC48V

Nominal Voltage, V DC Part No. M (360 mW) type 1.5 DS1E-ML2-DC1.5V DS2E-ML2-DC1.5V DS4E-ML2-DC1.5V

3 DS1E-ML2-DC3V DS2E-ML2-DC3V DS4E-ML2-DC3V

5 DS1E-ML2-DC5V DS2E-ML2-DC5V DS4E-ML2-DC5V

6 DS1E-ML2-DC6V DS2E-ML2-DC6V DS4E-ML2-DC6V

9 DS1E-ML2-DC9V DS2E-ML2-DC9V DS4E-ML2-DC9V

12 DS1E-ML2-DC12V DS2E-ML2-DC12V DS4E-ML2-DC12V

24 DS1E-ML2-DC24V DS2E-ML2-DC24V DS4E-ML2-DC24V

48 DS1E-ML2-DC48V DS2E-ML2-DC48V DS4E-ML2-DC48V

S (180 mW) type 1.5 DS1E-SL2-DC1.5V DS2E-SL2-DC1.5V DS4E-SL2-DC1.5V

3 DS1E-SL2-DC3V DS2E-SL2-DC3V DS4E-SL2-DC3V

5 DS1E-SL2-DC5V DS2E-SL2-DC5V DS4E-SL2-DC5V

6 DS1E-SL2-DC6V DS2E-SL2-DC6V DS4E-SL2-DC6V

9 DS1E-SL2-DC9V DS2E-SL2-DC9V DS4E-SL2-DC9V

12 DS1E-SL2-DC12V DS2E-SL2-DC12V DS4E-SL2-DC12V

24 DS1E-SL2-DC24V DS2E-SL2-DC24V DS4E-SL2-DC24V

48 DS1E-SL2-DC48V DS2E-SL2-DC48V DS4E-SL2-DC48V

(at 20 C 68 Single side stable 1 coil latching 2 coil latching Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Coil resistance, W 10%) Maximum allowable, V DC (at 50 C 122

1 Form C 2, 4 Form C 1 Form C 2, 4 Form C

M type 6 4.2 4.2 0.6 90 7.2 9 12 8.4 8.4 1.2 360 14.4 18 24 16.8 16.8 2.4 1440 28.8 36 48 33.6 33.6 4.8 5760 57.6 72 S type 3 2.4 2.1 0.3 45 4.8 6 5 4.0 3.5 0.5 125 8.0 10 6 4.8 4.2 0.6 180 9.6 12 9 7.2 6.3 0.9 405 14.4 18 12 9.6 8.4 1.2 720 19.2 24 24 19.2 16.8 2.4 2880 28.4 48 48 38.6 33.6 4.8 11520 76.8 96 Nominal voltage, V DC Reset Set, V DC (max.) Coil resistance, W 10%) Maximum allowable, V DC (at 50 C 122 M type 3 2.1 2.1 50 3.6 4.5 5 3.5 3.5 139 6 7.5 6 4.2 4.2 200 7.2 9 9 6.3 6.3 450 10.8 13.5 12 8.4 8.4 800 14.4 18 24 16.8 16.8 3200 28.8 36 48 33.6 33.6 12800 57.6 72 S type 1.5 1.2 1.05 25 2.4 3 3 2.4 2.1 100 4.8 6 5 4.0 3.5 278 8.0 10 6 4.8 4.2 400 9.6 12 9 7.2 6.3 900 14.4 18 12 9.6 8.4 1600 19.2 24 24 19.2 16.8 6400 38.4 48 48 38.4 33.6 25600 76.8 96 Nominal voltage, V DC Reset Set, V DC (max.) Coil resistance, W 10%) Maximum allowable, V DC (at 50 C 122

1 Form C 2,4 Form C Coil l Coil ll 1 Form C 2,4 Form C

M type 3 2.1 2.1 25 3.6 4.5 5 3.5 3.5 69.4 6 7.5 6 4.2 4.2 100 7.2 9 9 6.3 6.3 225 10.8 13.5 12 8.4 8.4 400 14.4 18 24 16.8 16.8 1600 28.8 36 48 33.6 33.6 6400 57.6 72 S type 3 2.4 2.1 50 4.8 6 5 4.0 3.5 139 8.0 10 6 4.8 4.2 200 9.6 12 9 7.2 6.3 450 14.4 18 12 9.6 8.4 800 19.2 24 24 19.2 16.8 3200 38.4 48 48 38.4 33.6 12800 76.8 96

1 Form C

Single side stable, 1 coil latching, 2 coil latching General tolerance: 0.3 .012 7.62 .300 5.6 .221 0.6 .024 5.08 .200 0.6 .024 3.4 .134 9.9 .340 9.3 .366 .590 5.08 .200 0.6 .024 .590 9.9 .390 7.62 .300 7.62 .300 PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching Tolerance: 0.1 .004 2.54 .100 7.62 .300 2.54 .100 5-0.9 dia 5-.035 dia 2.54 .100 7.62 .300 2.54 .100 6-0.9 dia 6-.035 dia Schematic (Bottom view) Single side stable Deenergized condition 1 coil latching Diagram shows the "reset" position when terminals 1 and 6 are energized. Energize with reverse polarity to transfer contacts. 2 coil latching Diagram shows the "reset" position when terminals 3 and 6 are energized. Energize terminals 1 and 3 to transfer contacts. N.O. N.C. COM

• A polarity bar showing the relay direction can replace the schematic. SET RST COM SET SET RST RST COM

2 Form C

Single side stable, 1 coil latching, 2 coil latching General tolerance: 0.3 .012 5.08 .200 5.08 .200 0.6 .024 3.4 .134 9.9 .340 9.3 .366 .787 7.62 .300 9.9 .390 0.6 .024 7.62 .300 5.6 .221 5.08 .200 5.08 .200 5.08 .2002.54 .100 0.6 .024 .787 PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching Tolerance: 0.1 .004 2.54 .100 7.62 .300 2.54 .100 8-0.9 dia 8-.035 dia matching 16 pin IC socket 2.54 .100 7.62 .300 2.54 .100 10-0.9 dia 10-.035 dia Schematic (Bottom view) Single side stable Deenergized condition 1 coil latching Diagram shows the "reset" position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts. 2 coil latching Diagram shows the "reset" position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. N.O. N.O. COM N.C. COM N.C.

• A polarity bar showing the relay direction can replace the schematic. SET SET COM RST COM RST Set Reset SET SET COM RST COM RST

4 Form C

Single side stable, 1 coil latching, 2 coil latching General tolerance: 0.3 .012 2.54 .100 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 0.6 .024 3.4 .134 9.9 .340 9.3 .366 35.24 1.387 7.62 .300 9.9 .390 0.6 .024 7.62 .300 5.6 .2215.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 0.6 .024 35.24 1.387 PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching Tolerance: 0.1 .004 7.62 .300 2.54 .100 2.54 .100 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 · 3 .100 · 3 14-0.9 dia 14-.035 dia 7.62 .300 2.54 .100 2.54 .100 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 .100 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 2.54 · 2 .100 · 2 16-0.9 dia 16-.035 dia Schematic (Bottom view) Single side stable Deenergized condition 1 coil latching Diagram shows the "reset" position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts. 2 coil latching Diagram shows the "reset" position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. N.O. N.O. N.O. N.O. COM N.C. COM COM COM N.C. N.C. N.C.

• A polarity bar showing the relay direction can replace the schematic. SET SET SET SET COM RST COM COM COM RST RST RST SET SET SET SET COM RST COM COM Reset Set COM RST RST RST REFERENCE DATA 1. Maximum switching capacity 2. Life curve (Resistive load) 3. Contact reliability for AC loads Sample: DS2E-M-DC24V 10 pcs. Cycle rate: 20 cpm. Detection level: 200 mW 10mV 10V 100V 1,000V 10µA 100mA 1A Switching current Contact voltage 100 1,000 102 Switching current, A No. of operations, ·10

30 V DC

125 V DC

0.1 0.2 0.5 1.0 2.0 5.0 10.0 30.0 50.0 70.0 95.0 99.0 99.9 100 100 1 ,000 1A 125V AC 0.5A 250V AC 0.3A 250V AC0.5A 125V AC No. of operations, ·10 Weibull probability data F(t), % mm inch

4-(1). Coil termperature rise (2 Form C single side stable type) Point measured: Inside the coil Ambient temperature: 18° to 19°C 64° to 66°F 4-(2). Coil tempeature rise (4 Form C single side stable type) Point measured: Inside the coil Ambient temperature: 17° to 18°C 63° to 64°F 4-(3). Coil temperature rise (2 Form C 2 coil latching type) Point measured: Inside the coil Ambient temperature: 20° to 21°C 68° to 70°F 0 100 110 Coil applied voltage, %V Temperature rise, °C 0 100 110 Coil applied voltage, %V Temperature rise, °C 0 100 110 Coil applied voltage, %V Temperature rise, °C Reset coil Set coil 4-(4). Coil temperature rise (4 Form C 2 coil latching type) Point measured: Inside the coil Ambient temperature: 20°C 68°F 5. Operate and release time characteristics (2 Form C single side stable type) Test condition: Without diode connected to coil in par- allel 6-(1). Influence of adjuacent mounting (1 Form C) 0 100 110 Coil applied voltage, %V Temperature rise, °C Reset coil Set coil 1 0 80 100 120 Release time (mean) Operate time (mean) Coil applied voltage, % Operate and release time, ms –10 –10 .197 .394 Inter-relay distance , mm inch Pick-up voltage Drop-out voltage (1) (2) (3) OFF OFF ON ON OFF OFF ON ON Rete of change, % Rete of change, % 6-(2). Influence of adjacent mounting (2 Form C) 6-(3). Influence of adjacent mounting (4 Form C) –10 –10 .197 .394 OFF OFF ON ON OFF OFF ON ON Inter-relay distance , mm inch Pick-up voltage Drop-out voltage (1) (2) (3) Rete of change, % Rete of change, % –80 –60 –40 –20 .394 .787 OFF OFF ON ON OFF OFF ON ON Inter-relay distance , mm inch Pick-up voltage (1) (2) (3) Rete of change, % –80 –60 –40 –20 .394 .787 OFF OFF ON ON OFF OFF ON ON Inter-relay distance , mm inch Drop-out voltage (1) (2) (3) Rete of change, % For Cautions for Use, see Relay Technical Information 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.