DS3686 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Y TTL/LS/CMOS compatible inputs Y High impedance inputs (PNP’s) Y High output voltage breakdown (65V typ) Y High output current capability (300 mA max) Y Internal protection circuit eliminates need for output protection diode Y Output breakdown protection if V CC supply is lost Y Low V CC power dissipation (90 mW (typ) both outputs ‘‘ON’’) Y Voltage and current levels compatible for use in tele- phone relay applications Connection Diagrams Metal Can Package TL/F/5822–1 Top View Pin 4 is in electrical contact with the case Order Number DS3686H See NS Package Number H08C Truth Table Positive logic: AB e X A B Output X 00 1 10 1 01 1 11 0 Logic ‘‘0’’ output ‘‘ON’’ Logic ‘‘1’’ output ‘‘OFF’’ Dual-In-Line Package TL/F/5822–2 Top View Order Number DS3686J-8 or DS3686N See NS Package Number J08A or N08E C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.

Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 15V Output Voltage 56V Storage Temperature Range b65§Ct o a150§C Maximum Power Dissipation * at 25 §C Cavity Package 1133 mW Molded Package 1022 mW Lead Temperature (Soldering, 4 seconds) 260 *Derate cavity package 7.6 mW/ §C above 25 §C; derate molded package 8.2 mW/§C above 25 §C; derate TO-5 package 5.2 mW/ §C above 25 §C. Operating Conditions Min Max Units Supply Voltage, V CC 4.75 5.25 V Temperature, T A 0 g70 §C Electrical Characteristics (Notes 2 and 3) Symbol Parameter Conditions Min Typ Max Units VIH Logical ‘‘1’’ Input Voltage R L e 180X,V L e 54V, V O s 2.5V 2.0 V IIH Logical ‘‘1’’ Input Current V CC e Max, V IN e 5.5V 0.01 40 mA VIL Logical ‘‘0’’ Input Voltage R L e 180X,V L e 54V, V O s 53.8V 0.8 V IIL Logical ‘‘0’’ Input Current V CC e Max, V IN e 0.4V b150 b250 mA VCD Input Clamp Voltage V CC e 5V, I CLAMP eb 12 mA, T A e 25§C b1.0 b1.5 V VOH Output Breakdown V CC e Max, V IN e 0V, I OUT e 5m A 5 6 6 5 V IOH Output Leakage V CC e Max, V IN e 0.4V, V OUT e 54V 0.5 250 mA VOL Output ON Voltage V CC e Min, DS3686 I OL e 100 mA 0.85 1.0 V VIN e 2.4V IOL e 300 mA 1.0 1.2 V ICC(1) Supply Current (Both Drivers) V CC e Max, V IN e 0V, Outputs Open 2 4 mA ICC(0) Supply Current (Both Drivers) V CC e Max, V IN e 3V, Outputs Open 18 28 mA tPD0 Propagation Delay to a Logical ‘‘0’’ C L e 15 pF, V L e 10V, R L e 50X 50 ns(Output Turn ON) T A e 25§C, V CC e 5V tPD1 Propagation Delay to a Logical ‘‘1’’ C L e 15 pF, V L e 10V, R L e 50X 1 ms(Output Turn OFF) T A e 25§C, V CC e 5V Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. Except for ‘‘Operating Temperature Range’’ they are not meant to imply that the devices should be operated at these limits. The table of ‘‘Electrical Characteristics’’ provides conditions for actual device operation. Note 2: Unless otherwise specified min/max limits apply across the 0 §Ct o a70§C range for the DS3686. All typicals are given for V CC e 5V and T A e 25§C. Note 3: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown as max or min on absolute value basis.

TL/F/5822–3 AC Test Circuit and Switching Time Waveforms TL/F/5822–4 Note 1: The pulse generator has the following characteristics: PRR e 100 kHz, 50% duty cycle, Z OUT e 50X,t r e tf s 10 ns. Note 2: CL includes probe and jig capacitance. TL/F/5822–5

Physical Dimensions inches (millimeters) Metal Can Package (H) Order Number DS3686H

Physical Dimensions inches (millimeters) (Continued) Ceramic Dual-In-Line Package (J) Order Number DS3686J-8

DS3686 Dual Positive Voltage Relay Driver Physical Dimensions inches (millimeters) (Continued) Molded Dual-In-Line Package (N) Order Number DS3686N LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309 Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408 Tel: 1(800) 272-9959 Deutsch Tel: ( a49) 0-180-530 85 85 Tsimshatsui, Kowloon Fax: 1(800) 737-7018 English Tel: ( a49) 0-180-532 78 32 Hong Kong Fran3ais Tel: ( a49) 0-180-532 93 58 Tel: (852) 2737-1600 Italiano Tel: ( a49) 0-180-534 16 80 Fax: (852) 2736-9960 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.