DS3680 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Y Quad 50 mA sink capability Y TTL/LS/COMS or voltage comparator input Y High input common-mode voltage range Y Very low input current Y Fail-safe disconnect feature Y Built-in output clamp diode Connection Diagram Dual-In-Line Package TL/F/5821–1 Top View Order Number DS3680J, DS3680M or DS3680N See NS Package Number J14A, M14A, N14A Logic Diagram TL/F/5821–2 Truth Table Differential Inputs Outputs VID t 2V On VID s 0.8V Off Open Off C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.

Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage (GND to V EEb, and Any Pin) b70V Positive Input Voltage (Input to GND) 20V Negative Input Voltage (Input to V EEb) b5V Differential Voltage ( aIN to bIN) g20V Inductive Load L Ls5h ILs50 mA Output Current b100 mA Storage Temperature b65§Ct o a150§C Maximum Power Dissipation * at 25 §C Cavity Package 1433 mW Molded Dip Package 1398 mW Lead Temperature (Soldering, 4 seconds) 260 * Derate cavity package 9.6 mW/ §C above 25 §C; derate molded dip pack- age 11.2 mW/ §C above 25 §C; derate SO package 8.02 mW/ §C above 25§C. Recommended Operating Conditions Min Max Units Supply Voltage (GND to V EEb) b10 b60 V Input Voltage (Input to GND) b20 20 V Logic ON Voltage ( aIN) Referenced to bIN 2 20 V Logic OFF Voltage ( aIN) Referenced to bIN b20 0.8 V Temperature Range b25 a85 §C Electrical Characteristics (Notes 2 and 3) Symbol Parameter Conditions Min Typ Max Units VIH Logic ‘‘1’’ Input Voltage 2.0 1.3 V VIL Logic ‘‘0’’ Input Voltage 1.3 0.8 V IINH Logic ‘‘1’’ Input Current V IN e 2V 40 100 mA VIN e 7V 375 1000 mA IINL Logic ‘‘0’’ Input Current V IN e 0.4V b0.01 b5 mA VIN eb 7V b1 b100 mA VOL Output ON Voltage I OL e 50 mA b1.6 b2.1 V IOFF Output Leakage V OUT e VEEbb 2 b100 mA IFS Fail-Safe Output Leakage V OUT e VEEb b2 b100 mA(Inputs Open) ILC Output Clamp Leakage Current V OUT e GND 2 100 mA VC Output Clamp Voltage I CLAMP eb 50 mA b2 b1.2 VReferenced to V EEb VP Positive Output Clamp Voltage I CLAMP e 50 mA 0.9 1.2 VReferenced to GND IEE(ON) ON Supply Current All Drivers ON b2 b4.4 mA IEE(OFF) OFF Supply Current All Drivers OFF b1 b100 mA tPD(ON) Propagation Delay to Driver ON L e 1h, R L e 1k, 11 0 msVIN e3V Pulse tPD(OFF) Propagation Delay to Driver OFF L e 1h, R L e 1k, 11 0 msVIN e 3V Pulse Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. Except for ‘‘Operating Temperature Range’’, they are not meant to imply that the device should be operated at these limits. The table of ‘‘Electrical Characteristics’’ provides conditions for actual device operation. Note 2: Unless otherwise specified, the min/max limits of the table of ‘‘Electrical Characteristics’’ apply within the range of the table of ‘‘Operating Conditions’’. All typical values are given for V EEb e 52V, and T A e 25§C. Note 3: All current into device pins shown as positive, out of the device as negative. All voltages are referenced to ground unless otherwise noted.

TL/F/5821–3 TL/F/5821–4 Physical Dimensions inches (millimeter) Ceramic Dual-In-Line Package (J) Order Number DS3680J

Physical Dimensions inches (millimeters) (Continued) Order Number DS3680M Molded Dual-In-Line Package (N) Order Number DS3680N

DS3680 Quad Negative Voltage Relay Driver LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309 Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408 Tel: 1(800) 272-9959 Deutsch Tel: ( a49) 0-180-530 85 85 Tsimshatsui, Kowloon Fax: 1(800) 737-7018 English Tel: ( a49) 0-180-532 78 32 Hong Kong Fran3ais Tel: ( a49) 0-180-532 93 58 Tel: (852) 2737-1600 Italiano Tel: ( a49) 0-180-534 16 80 Fax: (852) 2736-9960 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.