DS16149 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

# Typ 9 ns driving 50 pF # Typ 29 ns driving 500 pF Y Built-in 15 X damping resistor (DS16149/DS36149) Y Same pin-out as DM8096 and DM74366 Schematic Diagram TL/F/7553–1 C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.

Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7.0V Logical ‘‘1’’ Input Voltage 7.0V Logical ‘‘0’’ Input Voltage b1.5V Storage Temperature Range b65§Ct o a150§C Maximum Power Dissipation * at 25 §C Cavity Package 1371 mW Molded Package 1280 mW Lead Temperature (Soldering 10 seconds) 300 *Derate cavity package 9.1 mW/ §C above 25 §C; derate molded package 10.2 m/W §C above 25 §C. Operating Conditions Min Max Units Supply Voltage (V CC) 4.5 5.5 V Temperature (T A) DS16149, DS16179 b55 a125 §C DS36149, DS36179 0 a70 §C Symbol Parameter Conditions Min Typ Max Units VIN(1) Logical ‘‘1’’ Input Voltage 2.0 V VIN(0) Logical ‘‘0’’ Input Voltage 0.8 V IIN(1) Logical ‘‘1’’ Input Current V CC e 5.5V, V IN e 5.5V 0.1 40 mA IIN(0) Logical ‘‘0’’ Input Current V CC e 5.5V, V IN e 0.5V b50 b250 mA VCLAMP Input Clamp Voltage V CC e 4.5V, I IN eb 18 mA b0.75 b1.2 V VOH Logical ‘‘1’’ Output Voltage VCC e 4.5V, I OH eb 10 mA DS16149/DS16179 3.4 4.3 V (No Load) DS36149/DS36179 3.5 4.3 V VOL Logical ‘‘0’’ Output Voltage VCC e 4.5V, I OL e 10 mA DS16149/DS16179 0.25 0.4 V (No Load) DS36149/DS36179 0.25 0.35 V VOH Logical ‘‘1’’ Output Voltage DS16149 2.4 3.5 V (With Load) VCC e 4.5V, I OH eb 1.0 mA DS16179 2.5 3.5 V DS36149 2.6 3.5 V DS36179 2.7 3.5 V VOL Logical ‘‘0’’ Output Voltage DS16149 0.6 1.1 V (With Load) VCC e 4.5V, I OL e 20 mA DS16179 0.4 0.5 V DS36149 0.6 1.0 V DS36179 0.4 0.5 V IID Logical ‘‘1’’ Drive Current V CC e 4.5V, V OUT e 0V, (Note 4) b250 mA IOD Logical ‘‘0’’ Drive Current V CC e 4.5V, V OUT e 4.5V, (Note 4) 150 mA ICC Power Supply Current Disable Inputs e 0V 33 60 mA VCC e 5.5V All Other Inputs e 3V All Inputs e 0V 14 20 mA Switching Characteristics (VCC e 5V, T A e 25§C) (Note 4) Symbol Parameter Conditions Min Typ Max Units tSg Storage Delay Negative Edge (Figure 1 ) CL e 50 pF 4.5 7 ns CL e 500 pF 7.5 12 ns tS’ Storage Delay Positive Edge (Figure 1 ) CL e 50 pF 5 8 ns CL e 500 pF 8 13 ns tF Fall Time (Figure 1 ) CL e 50 pF 5 8 ns CL e 500 pF 22 35 ns

Switching Characteristics (VCC e 5V, T A e 25§C) (Note 4) (Continued) Symbol Parameter Conditions Min Typ Max Units tR Rise Time ( Figure 1 )C L e 50 pF 6 9 ns CL e 500 pF 26 35 ns tLH Delay from Disable Input R L e 2k X to Gnd, 15 22 ns to Logical ‘‘1’’ C L e 50 pF, ( Figure 2 ) tHL Delay from Disable Input R L e 2k X to V CC,1 1 1 8 n s to Logical ‘‘0’’ C L e 50 pF, ( Figure 3 ) Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. Except for ‘‘Operating Temperature Range’’ they are not meant to imply that the devices should be operated at these limits. The table of ‘‘Electrical Characteristics’’ provides conditions for actual device operation. Note 2: Unless otherwise specified min/max limits apply across the b55§Ct o a125§C temperature range for the DS16149 and DS16179 and across the 0 §Ct o a70§C range for the DS36149 and DS36179. All typical values are for T A e 25§C and V CC e 5V. Note 3: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown as max or min on absolute value basis. Note 4: When measuring output drive current and switching response for the DS16179 and DS36179 a 15 X resistor should be placed in series with each output. This resistor is internal to the DS16149/DS36149 and need not be added. Connection Diagram Dual In-Line Package TL/F/7553–2 Top View Order Number DS16149J, DS36149J, DS16179J, DS36179J, DS36149N or DS36179N See NS Package Number J16A or N16A Truth Table Disable Input Input Output DIS 1 DIS2 000 1 001 0 01X 1 10X 1 11X 1 X e Don’t care AC Test Circuits and Switching Time Waveforms tSg,t Sg,t R,t F TL/F/7553–3 FIGURE 1

Physical Dimensions inches (millimeters) Ceramic Dual-In-Line Package (J) Order Number DS16149J, DS36149J DS16179J or DS36179J

DS16149/DS36149, DS16179/DS36179 Hex MOS Drivers Physical Dimensions inches (millimeters) (Continued) Molded Dual-In-Line Package (N) Order Number DS36149N, DS36149N LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309 Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408 Tel: 1(800) 272-9959 Deutsch Tel: ( a49) 0-180-530 85 85 Tsimshatsui, Kowloon Fax: 1(800) 737-7018 English Tel: ( a49) 0-180-532 78 32 Hong Kong Fran3ais Tel: ( a49) 0-180-532 93 58 Tel: (852) 2737-1600 Italiano Tel: ( a49) 0-180-534 16 80 Fax: (852) 2736-9960 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.