DS3316P COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2007 Specifications subject to change without notice. Please check our website for latest information. SMT Power Inductors – DS3316P Series Magnetic shielding and high efficiency are features of the DS3316 family of power inductors. They are de- signed for high performance DC-DC converter applica- tions, especially those requiring shielding. The terminations wrap around the end of the base, ensuring a sound solder fillet and simplifying inspection. Saturation current ratings up to 11 A and rms current ratings as high as 5 A are available. DC resistance as low as 0.021 Ohms keeps power losses to a minimum. L DCR SRF ±20%2 max typ Isat3 Irms4 Part number1 (µH) (Ohms) (MHz) (A) (A) DS3316P-102ML_ 1.0 0.021 140 11.0 5.0 DS3316P-152ML_ 1.5 0.022 120 9.5 4.5 DS3316P-222ML_ 2.2 0.032 80 7.8 3.8 DS3316P-332ML_ 3.3 0.039 70 6.0 3.3 DS3316P-472ML_ 4.7 0.054 40 5.4 2.7 DS3316P-682ML_ 6.8 0.075 38 4.5 2.2 DS3316P-822ML_ 8.2 0.085 36 4.0 2.1 DS3316P-103ML_ 10 0.101 35 3.5 2.0 DS3316P-153ML_ 15 0.150 25 3.0 1.5 DS3316P-223ML_ 22 0.207 19 2.0 1.3 DS3316P-333ML_ 33 0.334 15 1.8 1.1 DS3316P-473ML_ 47 0.472 13 1.4 0.80 DS3316P-683ML_ 68 0.660 10 1.3 0.70 DS3316P-104ML_ 100 1.11 7 1.2 0.60 DS3316P-154ML_ 150 1.55 6 0.80 0.50 DS3316P-224ML_ 220 2.00 5 0.70 0.37 DS3316P-105ML_ 1000 8.30 2 0.32 0.17 Document 187-1 Document 187-1 Revised 09/20/07 1. When ordering, please specify termination and packaging codes: DS3316P-105MLD Termination: L = RoHS compliant gold over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D =1 3″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40°C temperature rise from 25°C ambient. 5. Ambient temperature range:–40°C to +85°C with Irms current +85°C to +125°C with derated current 6. Storage temperature range:Component: –40°C to +125°C Packaging: –55°C to +80°C 7. Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. 8. Electrical specifications at 25°C. See Qualification Standards section for environmental and test data. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. For new designs, consider the MSS1038 as an alter- native to this series. The MSS1038 series is more cost effective, features a smaller footprint, lower profile, lower DCR and better current handling. We will continue to manufacture and support the DS3316 indefinitely.
© Coilcraft, Inc. 2007 Specifications subject to change without notice. Please check our website for latest information. Document 187-2 Document 187-2 Revised 09/20/07 SMT Power Inductors - DS3316P Series Typical L vs Frequency 0.1 100 1000 0.1 1 10 100 Current (A) Inductance (µH) 10 µH 1.0 µH 47 µH 0.100 2,54 0.100 2,54 0.110 2,79 0.115 2,92 0.290 7,37 0.300 7,62 Recommended Land Pattern 0.510 12,95 0.200 5,08 max 0.330 8,38dia max 0.370 9,40 0.190 4,83 dia max Dash number Internal code XXXX 0.145 3,69 Allow an additional 0.02/0,508 in width and 0.01/0,254 in height for optional tin-silver-copper application. tin-lead and Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for details. Weight: 0.82 – 0.87 g Tape and reel: 1000/13″ reel 24 mm tape width For packaging data see Tape and Reel Specifications section. Typical L vs Current Irms Derating -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 25°C Percent of rated rms I