DS313 BRIDGELUX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 20

Technical content

Datasheet sections

Bridgelux SMD 2835 1W 9V Thrive Product Data Sheet DS310 Rev. A (08/2019) 1 Bridgelux SMD 2835 1W 9V Thrive™93 Product Data Sheet DS313 BXEN-27R|30R|40R|50R|65R

Bridgelux Thrive™ 93 uses proprietary technology to deliver a smoother spectrum with reduced spectral spikes and reduced blue intensity with the efficiency required to meet retrofit lamp standards. Thrive 93 has been engineered to optimize efficiency while also delivering the color quality metrics required to enable lamps compliant with JA-8 requirements for the California Title-20 energy code, where CRI R1-R8 values of >72 are required and CRI >90 with R9 >50 is desired to facilitate meeting standard compliance.

Features

  • Engineered spectra with reduced blue emission
  • CRI > 90, R9>50, R1-R8 >72
  • High efficiency full spectrum solution
  • No violet chip augmentation
  • Hot color targeted
  • Industry standard 2835 footprint Benefits
  • Full spectrum lighting with fewer spectral spikes
  • Natural and vivid color rendering compliant with regu- latory standards
  • Greater energy savings, lower utility costs
  • Economical, high efficiency solution
  • Uniform and consistent white light under application conditions
  • Ease of design and rapid go-to-market SMD 2835 Thrive

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Product Feature Map Cathode Mark Yellow phosphor Light Emitting Surface (LES) Product Nomenclature The part number designation for Bridgelux SMD 2835 is explained as follows: Product Test Conditions Bridgelux SMD 2835 LEDs are tested and binned with a 10ms pulse of 100mA at Tj (junction temperature)=Tsp (solder point temperature) =25°C. Forward voltage and luminous flux are binned at a Tj=Tsp=25°C, while color is hot targeted at a Tsp of 85°C. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Product Family Color Bin Options Flux Bins Minimum CRI R = Thrive 93 Forward Voltage Bins BXEN – 27 R – 1 3 H – 9 C –00 – 0 – 0 Product Version High Power Die count in parallel Typical Forward Voltage Die count in series Bridgelux SMD LED products come in industry standard package sizes and follow ANSI binning standards. These LEDs are optimized for cost and performance, helping to ensure highly competitive system lumen per dollar performance while addressing the stringent efficacy and reliability standards required for modern lighting applications. Nominal CCT 27 = 2,700K 30 = 3,000K 40 = 4,000K 50 = 5,000K 65 = 6,500K

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Product Selection Guide The following product configurations are available: Table 1: Selection Guide, Pulsed Measurement Data at 100mA (Tj=Tsp=25°C) Part Number1,6 Nomi- nal CCT2 (K) CRI3, 5 (Typical) Nominal Drive Current (mA) Forward Voltage4, 5 (V) Typical Pulsed Flux (lm)4, 5 Typical Power (W) Typical Efficacy (lm/W) Min Typical Max Min Typical Max BXEN-27R-13H-9C-00-0-0 2700 - 100 8.8 9.1 9.6 100 108 112 0.9 119 BXEN-30R-13H-9C-00-0-0 3000 - 100 8.8 9.1 9.6 105 110 115 0.9 121 BXEN-40R-13H-9C-00-0-0 4000 - 100 8.8 9.1 9.6 115 120 125 0.9 132 BXEN-50R-13H-9C-00-0-0 5000 - 100 8.8 9.1 9.6 115 120 125 0.9 132 BXEN-65R-13H-9C-00-0-0 6500 - 100 8.8 9.1 9.6 115 120 125 0.9 132 Table 2: Selection Guide, Pulsed Test Performance at 100mA (T sp = 85°C)7,8 Part Number1,6 Nominal CCT2 (K) CRI3, 5 (Typical) Nominal Drive Current (mA) Forward Voltage5 (V) Pulsed Flux (lm)5 Typical Power (W) Typical Efficacy (lm/W) Typical Pho- tosynthetic Photon Flux9 (µmol/s) Typical Photon Efficiency (µmol/J)Min Typical Max Min Typical Max Notes for Tables 1 & 2: 1. The last 6 characters (including hyphens ‘-’) refer to flux bins, forward voltage bins, and color bin options, respectively. “00-0-0” denotes the full distribution of flux, forward voltage, and 6 SDCM color. Example: BXEN-27R-13H-9C-00-0-0 refers to the full distribution of flux, forward voltage, and color within a 2700K 6-step ANSI standard chromaticity region with a minimum of 90 CRI, 1x3 die configuration, high power, 9.1V typical forward voltage. 2. Product CCT is hot targeted at Tsp = 85°C. Nominal CCT as defined by ANSI C78.377-2011. 3. The listed minimum CRI is 90 and include test tolerance. 4. Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tj=Tsp=25°C. 5. Bridgelux maintains a ±7.5% tolerance on luminous flux measurements, ±0.15V tolerance on forward voltage measurements, and ±2 tolerance on CRI measurements for the SMD 2835. 6. Refer to Table 6 and Table 7 for Bridgelux SMD 2835 Luminous Flux Binning and Forward Voltage Binning information. 7. Typical pulsed test performance values are provided as reference only and are not a guarantee of performance. 8. Typical performance is estimated based on operation under pulsed current with LED emitter mounted onto a heat sink with thermal interface material and the solder point temperature maintained at 85°C. Based on Bridgelux test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected. 9. Photosynthetic Photon Flux is measure of photon flux in the 400nm-700nm region. Table 3: Minimum Color Rendering Index , 100mA, Tsp=85°C 1 Nominal CCT1 R1 R2 R3 R4 R5 R6 R7 R8 R9 2700K 90 90 90 90 90 90 90 72 50 3000K 90 90 90 90 90 90 90 72 50 4000K 90 90 90 90 90 90 90 72 50 5000K 90 90 90 90 90 90 90 72 50 6500K 90 90 90 90 90 90 90 72 50 Note for Table 3: 1. Bridgelux maintains a tolerance of ± 3 on Color Rendering Index R1-R9 measurements.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Spectrum CharacteristicsSpectrum Characteristics Figure 1: Typical Color Spectrum Note for Figure 1: 1. Color spectra measured at typical current for Tsp = 85°C. 2. Spectra are provided as reference only and are not a guarantee of performance . 3. Spectra at other currents will be different from the spectra at typical current. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 380 430 480 530 580 630 680 730 780 Radiant power (norminized to Y100) Wavelength nm 2700K Ref 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 380 430 480 530 580 630 680 730 780 Radiant power (norminized to Y100) Wavelength nm 3000K Ref 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 380 430 480 530 580 630 680 730 780 Radiant power (norminized to Y100) Wavelength nm 4000K Ref 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 380 430 480 530 580 630 680 730 780 Radiant power (norminized to Y100) Wavelength nm 5000K Ref 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 380 430 480 530 580 630 680 730 780 Radiant power (norminized to Y100) Wavelength nm 6500K Ref

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021)

Electrical Characteristics

Table 4: Electrical Characteristics Part Number 1 Drive Current (mA) Forward Voltage (V) 2,3 Typical Temperature Coefficient of Forward Voltage ∆Vf/∆T (mV/ºC) Typical Thermal Resistance Junction to Solder Point4 R j-sp (ºC/W)Minimum Typical Maximum BXEN-XXX-13H-9C-00-0-0 100 8.8 9.1 9.6 -2.76 16 Notes for Table 4: 1. The last 6 characters (including hyphens ‘-’) refer to flux bins, forward voltage bins, and color bin options, respectively. “00-0-0” denotes the full distribution of flux, forward voltage, and 6 SDCM color. Example: BXEN-27R-13H-9C-00-0-0 refers to the full distribution of flux, forward voltage, and color within a 2700K 6-step ANSI standard chromaticity region with a minimum of 90 CRI, 1x3 die configuration, high power, 9.1V typical forward voltage. 2. Bridgelux maintains a tolerance of ± 0.15V on forward voltage measurements. Voltage minimum and maximum values at the nominal drive current are guaranteed by 100% test. 3. Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tsp = 25°C. 4. Thermal resistance value was calculated using total electrical input power; optical power was not subtracted from input power.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Absolute Maximum Ratings Table 5: Maximum Ratings Parameter Maximum Rating LED Junction Temperature (Tj) 125°C Storage Temperature -40°C to +105°C Operating Solder Point Temperature (TSp) -40°C to +105°C Soldering Temperature 260°C or lower for a maximum of 10 seconds Maximum Drive Current 120mA Maximum Peak Pulsed Forward Current1 240mA Maximum Reverse Voltage2 - Moisture Sensitivity Rating MSL 3 Electrostatic Discharge 2kV HBM. JEDEC-JS-001-HBM and JEDEC-JS-001-2012 Notes for Table 5: 1. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 10 ms when operating LED SMD at maximum peak pulsed current specified. Maxi- mum peak pulsed current indicate values where LED SMD can be driven without catastrophic failures. 2. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. no rating is provided.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Product Bin Definitions Table 7: Forward Voltage Bin Definition at 100mA, Tsp=25°C Bin Code Minimum Maximum Unit Condition U 8.8 9.0 V IF=100mA V 9.0 9.2 W 9.2 9.4 X 9.4 9.6 Note for Table 7: 1. Bridgelux maintains a tolerance of ± 0.15V on forward voltage measurements. Table 6 lists the standard photometric luminous flux bins for Bridgelux SMD 2835 LEDs. Although several bins are listed, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 6: Luminous Flux Bin Definitions at 100mA, Tsp=25°C Bin Code Minimum Maximum Unit Condition 5C 100 105 lm IF=100mA 5D 105 110 5E 110 115 5F 115 120 5G 120 125 5H 125 130 Note for Table 6: 1. Bridgelux maintains a tolerance of ± 7.5% on luminous flux measurements.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Product Bin Definitions Table 8: MacAdam Ellipse Color Bin Definitions CCT Color Space Center Point Major Axis Minor Axis Ellipse Rotation Angle Color Bin X Y 2700K 3000K 4000K 5000K 6500K Notes for Table 8: 1. Color binning at Tsp=85°C unless otherwise specified 2. Bridgelux maintains a tolerance of ± 0.007 on x and y color coordinates in the CIE 1931 color space.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Product Bin Definitions Figure 2: C.I.E. 1931 Chromaticity Diagram (Color Targeted at Tsp=85°C) A B D C F E 0.3350 0.3400 0.3450 0.3500 0.3550 0.3600 0.3650 0.3700 0.3750 y x 5000K A B D C F E 0.3150 0.3200 0.3250 0.3300 0.3350 0.3400 0.3450 y x 6500K AB C D F E 0.3900 0.3950 0.4000 0.4050 0.4100 0.4150 0.4200 0.4250 0.4300 y x 2700K B A D C F E 0.3850 0.3900 0.3950 0.4000 0.4050 0.4100 0.4150 0.4200 y x 3000K A B D C F E 0.3600 0.3650 0.3700 0.3750 0.3800 0.3850 0.3900 0.3950 0.4000 y x 4000K

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Mechanical Dimensions Figure 10: Drawing for SMD 2835 Notes for Figure 10: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Unless otherwise specified, tolerances are ± 0.10mm.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Reliability No . Items R而而而eference Standard Test Conditions Drive Current Test Duration Units Failed/Tested

1 Moisture/Reflow Sensitivity J-STD-020E Tsld = 260°C, 10sec,

Precondition: 60°C, 60%RH, 168hr - 3 reflows 0/22

2 Low Temperature Storage JESD22-A119 Ta=-40°C - 1000 hours 0/22

3 High Temperature Storage JESD22-A103D Ta= 105°C - 1000 hours 0/22

4 Low Temperature Operating Life JESD22-A108D Ta=-40°C 100mA 1000 hours 0/22

5 Temperature Humidity Operating

Life JESD22-A101C Tsp=85°C℃, RH=85% 100mA 1000 hours 0/22

6 High Temperature Operating Life JESD22-A108D Tsp=105°C 120mA 1000 hours 0/22

7 Power switching IEC62717:2014 Tsp= 105°C

30 sec on, 30 sec off 120mA 30000 cycles 0/22

8 Thermal Shock JESD22-A106B Ta=-40°C ~100°C;

Dwell : 15min; Transfer: 10sec - 200 cycles 0/22

9 Temperature Cycle JESD22-A104E

Ta=-40°C ~100°C; Dwell at extreme temperature: 15min; Ramp rate < 105°C/min - 200 cycles 0/22 10 Electrostatic Discharge JS-001-2012 HBM, 2KV, 1.5kΩ, 100pF, Alternately positive or negative - - 0/22 Table 9: Reliability Test Items and Conditions Passing Criteria Item Symbol Test Condition Passing Criteria Forward Voltage Vf 100mA ℃Vf<10% Luminous Flux Fv 100mA ℃Fv<30% Chromaticity Coordinates (x, y) 100mA ℃u’v’<0.007 Notes for Table 9: 1. Measurements are performed after allowing the LEDs to return to room temperature 2. Tsld : reflow soldering temperature; Ta : ambient temperature

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Packaging Figure 15: Emitter Reel Packaging Drawings package1 Note for Figure 15: 1. Drawings are not to scale. package2

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) Design Resources Disclaimers Precautions Please contact your Bridgelux sales representative for assistance. MINOR PRODUCT CHANGE POLICY The rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization. CAUTION: CHEMICAL EXPOSURE HAZARD Exposure to some chemicals commonly used in luminaire manufacturing and assembly can cause damage to the LED emitter. Please consult Bridgelux CAUTION: EYE SAFETY Eye safety classification for the use of Bridgelux SMD LED emitter is in accordance with IEC specification EN62778: Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires are classified as Risk Group 1 when operat- ed at or below the maximum drive current. Please use appropriate precautions. It is important that employees working with LEDs are trained to use them safely. CAUTION: RISK OF BURN Do not touch the SMD LED emitter during operation. Allow the emitter to cool for a sufficient period of time before handling. The SMD LED emitter may reach elevated temperatures such that could burn skin when touched. CAUTION CONTACT WITH LIGHT EMITTING SURFACE (LES) Avoid any contact with the LES. Do not touch the LES of the emitter or apply stress to the LES (yellow phosphor resin area). Contact may cause damage to the emitter Optics and reflectors must not be mounted in contact with the LES (yellow phosphor resin area). STANDARD TEST CONDITIONS Unless otherwise stated, LED emitter testing is performed at the nominal drive current.

Bridgelux SMD 2835 1W 9V Thrive93 Product Data Sheet DS313 Rev. B (12/2021) About Bridgelux: Bridging Light and Life™

46410 Fremont Boulevard

Fremont, CA 94538 USA Tel (925) 583-8400 www.bridgelux.com At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires. For more information about the company, please visit bridgelux.com twitter.com/Bridgelux facebook.com/Bridgelux linkedin.com/company/bridgelux-inc-_2 youtube.com/user/Bridgelux WeChat ID: BridgeluxInChina © 2021 Bridgelux, Inc. All rights reserved 2021. Product specifications are subject to change without notice. Bridgelux and the Bridgelux stylized logo design are registered trademarks of Bridgelux, Inc. All other trademarks are the property of their respective owners.