DS311 BRIDGELUX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 22

Technical content

Datasheet sections

Bridgelux SMD 2835 1W 9V Thrive Product Data Sheet DS310 Rev. A (08/2019) 1 Bridgelux SMD 2835 0.2W 3V Thrive™ Product Data Sheet DS311

  • Full consistent spectrum with fewer spectral spikes
  • Natural and vivid color rendering
  • Greater energy savings, lower utility costs
  • Economical, high efficiency solution
  • Uniform and consistent white light under application conditions
  • Ease of design and rapid go-to-market
  • Enables greater design flexibility and platform color consistency SMD 2835 Thrive

Features

  • Engineered spectra to closely match natural light
  • R1-R15>90,high CRI, Rf and Rg values
  • High efficiency full spectrum solution
  • No violet chip augmentation
  • Hot color targeted
  • Industry standard 2835 footprint
  • Broad product platform availability (SMDs and COBs)

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Product Feature Map Cathode Mark Yellow phosphor Light Emitting Surface (LES) Product Nomenclature The part number designation for Bridgelux SMD 2835 is explained as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Product Family Color Bin Options Flux Bins Minimum CRI Forward Voltage BinsNominal CCT BXEN – 27 S – 1 1 L – 3 C – 00 – 0 – 0 Product Version Low Power Die count in parallel Typical Forward Voltage Die count in series Bridgelux SMD LED products come in industry standard package sizes and follow ANSI binning standards. These LEDs are optimized for cost and performance, helping to ensure highly competitive system lumen per dollar performance while addressing the stringent efficacy and reliability standards required for modern lighting applications. Example : S = Thrive Example : 27 = 2,700K

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) The following product configurations are available: Table 1: Selection Guide, Pulsed Measurement Data at 60mA (Tj=Tsp=25°C) Part Number1,6 Nominal CCT2 (K) CRI3, 5 (Typical) Nominal Drive Current (mA) Forward Voltage4, 5 (V) Typical Pulsed Flux (lm)4, 5 Typical Power (W) Typical Efficacy (lm/W)Min Typical Max Min Typical Max Table 2: Selection Guide, Pulsed Test Performance at 60mA (T sp = 55°C)7,8 Part Number1,6 Nominal CCT2 (K) CRI3, 5 (Typical) Nominal Drive Current (mA) Forward Voltage5 (V) Typical Pulsed Flux (lm)5 Typical Power (W) Typical Efficacy (lm/W)Min Typical Max Min Typical Max Notes for Tables 1 & 2: 1. The last 6 characters (including hyphens ‘-’) refer to flux bins, forward voltage bins, and color bin options, respectively. “00-0-0” denotes the full distribution of flux, forward voltage, and color bin. Example: BXEN-27S-11L-3C-00-0-0 refers to the full distribution of flux, forward voltage, and color within a 2700K 6-step ANSI standard chromaticity region with a minimum of 95.5 CRI, 1x1 die configuration, low power, 2.90V typical forward voltage. 2. Product CCT is hot targeted at Tsp = 55°C. Nominal CCT as defined by ANSI C78.377-2011. 3. Listed CRIs are typical values and include test tolerance. 4. Products tested under pulsed condition (10ms pulse width) at nominal drive current . 5. Bridgelux maintains a ±7.5% tolerance on luminous flux measurements, ±0.15V tolerance on forward voltage measurements, and ±3 tolerance on CRI measurements for the SMD 2835. 6. Refer to Table 6 and Table 7 for Bridgelux SMD 2835 Luminous Flux Binning and Forward Voltage Binning information. 7. Typical pulsed test performance values are provided as reference only and are not a guarantee of performance. 8. Typical performance is estimated based on operation under pulsed current with LED emitter mounted onto a heat sink with thermal interface material and the solder point temperature maintained at 55°C. Based on Bridgelux test setup, values may vary depending on the thermal design of the luminaire and the exposed environment to which the product is subjected. Product Selection Guide

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Spectrum Characteristics Figure 1: Typical Color Spectrum Note for Figure 1: 1. Color spectra measured reference by nominal current for Tsp = 55°C. Spectral Matching to Natural Light Humans have evolved and thrived for millions of years under the sun’s natural daylight. While discussions continue regarding the development of LED prod- ucts with artificial spectra aimed at increasing productivity and focus or helping with relaxation, the long-term physiological effects of such altered environ- ments on humans remains unknown. Bridgelux Thrive is engineered to provide the closest match to natural light using proprietary chip, phosphor and packaging technology. Bridgelux is working with our customers and industry partners to define new metrics to describe and quantify this spectral matching; going beyond today’s quality of light metrics such as CRI and TM-30. Table 3: Typical Color Rendering Index and TM-30 Values, 60mA, Tsp=55°C 1 Nominal CCT1 Rf Rg R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 2700K 95 99 98 99 97 96 97 97 97 96 92 92 92 92 92 92 92 3000K 95 99 97 98 96 97 97 97 97 97 92 92 92 92 92 92 92 3500K 95 99 97 98 96 97 98 96 97 97 92 92 92 92 92 92 92 4000K 95 99 96 98 96 97 97 97 98 97 92 92 92 92 92 92 92 5000K 95 99 97 98 97 96 97 96 97 98 92 92 92 92 92 92 92 5700K 95 99 98 97 97 97 97 96 97 97 92 92 92 92 92 92 92 6500K 95 99 98 98 96 97 97 96 97 97 92 92 92 92 92 92 92 Note for Table 3: 1. Bridgelux maintains a tolerance of ± 3 on Color Rendering Index R1-R15 measurements and TM-30 measurements. 2. Rn reference by Nominal Drive Current will have deviations when changed drive current . 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 380 430 480 530 580 630 680 730 780 2700K 3000K 3500K 4000K 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 380 430 480 530 580 630 680 730 780 5000K 5700K 6500K

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023)

Electrical Characteristics

Table 4: Electrical Characteristics Part Number 1 Drive Current (mA) Forward Voltage (V) 2,3 Typical Temperature Coefficient of Forward Voltage ∆Vf/∆T (mV/ºC) Typical Thermal Resistance Junction to Solder Point3 R j-sp (ºC/W)Minimum Typical Maximum BXEN-XXX-11L-3C-00-0-0 60 2.7 2.9 3.1 -1.20 27 Notes for Table 4: 1. Bridgelux maintains a tolerance of ± 0.15V on forward voltage measurements. Voltage minimum and maximum values at the nominal drive current are guaranteed by 100% test. 2. Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tsp = 25°C. 3. Thermal resistance value was calculated using total electrical input power; optical power was not subtracted from input power.

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Absolute Maximum Ratings Table 5: Maximum Ratings Parameter Maximum Rating LED Junction Temperature (Tj) 125°C Storage Temperature -40°C to +105°C Operating Solder Point Temperature (TSp) -40°C to +105°C Soldering Temperature 260°C or lower for a maximum of 10 seconds Maximum Drive Current 100mA Maximum Peak Pulsed Forward Current1 200mA Maximum Reverse Voltage2 - Moisture Sensitivity Rating MSL 3 Electrostatic Discharge 2kV HBM. JEDEC-JS-001-HBM and JEDEC-JS-001-2012 Notes for Table 5: 1. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 10 ms when operating LED SMD at maximum peak pulsed current specified. Maxi- mum peak pulsed current indicate values where LED SMD can be driven without catastrophic failures. 2. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. no rating is provided.

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Product Bin Definitions Table 6 lists the standard photometric luminous flux bins for Bridgelux SMD 2835 LEDs. Although several bins are listed, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 6: Luminous Flux Bin Definitions at 60mA, Tsp=25°C Bin Code Minimum Maximum Unit Condition 19 20 22 lm IF=60mA 1A 22 24 1B 24 26 1C 26 28 Note for Table 6: 1. Bridgelux maintains a tolerance of ± 7.5% on luminous flux measurements. Table 7: Forward Voltage Bin Definition at 60mA, Tsp=25°C Bin Code Minimum Maximum Unit Condition 9 2.7 2.8 V IF=60mA A 2.8 2.9 B 2.9 3.0 C 3.0 3.1 Note for Table 7: 1. Bridgelux maintains a tolerance of ± 0.1V on forward voltage measurements.

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Product Bin Definitions Table 8: MacAdam Ellipse Color Bin Definitions Notes for Table 8: 1. Color binning at Tsp=55°C unless otherwise specified 2. Bridgelux maintains a tolerance of ± 0.007 on x and y color coordinates in the CIE 1931 color space. CCT Color Space Center Point Major Axis Minor Axis Ellipse Rotation Angle Color Bin X Y 2700K 3000K 3500K 4000K 5000K 5700K 6500K

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Product Bin Definitions Figure 8: C.I.E. 1931 Chromaticity Diagram ( Hot Color Targeted at Tsp=55°C) A B D C 0.3900 0.3950 0.4000 0.4050 0.4100 0.4150 0.4200 0.4250 0.4300 CIE_y CIE_x 2700K B A D C 0.3800 0.3850 0.3900 0.3950 0.4000 0.4050 0.4100 0.4150 0.4200 0.4250 CIE_y CIE_x 3000K B A D C 0.3700 0.3750 0.3800 0.3850 0.3900 0.3950 0.4000 0.4050 0.4100 0.4150 CIE_y CIE_x 3500K C D A 0.3550 0.3600 0.3650 0.3700 0.3750 0.3800 0.3850 0.3900 0.3950 0.4000 0.4050 CIE_y CIE_x 4000K C D A 0.3350 0.3400 0.3450 0.3500 0.3550 0.3600 0.3650 0.3700 0.3750 CIE_y CIE_x 5000K C D A 0.3250 0.3300 0.3350 0.3400 0.3450 0.3500 0.3550 0.3600 CIE_y CIE_x 5700K C D A 0.3100 0.3150 0.3200 0.3250 0.3300 0.3350 0.3400 0.3450 CIE_y CIE_x 6500K

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Mechanical Dimensions Figure 17: Drawing for SMD 2835 Notes for Figure 17: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Unless otherwise specified, tolerances are ± 0.10mm.

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Reliability No . Items R而而而eference Standard Test Conditions Drive Current Test Duration Units Failed/Tested

1 Moisture/Reflow Sensitivity J-STD-020E Tsld = 260°C, 10sec,

Precondition: 60°C, 60%RH, 168hr - 3 reflows 0/20

2 Low Temperature Storage JESD22-A119 Ta=-40°C - 1000 hours 0/20

3 High Temperature Storage JESD22-A103D Ta= 105°C - 1000 hours 0/20

4 Low Temperature Operating Life JESD22-A108D Ta=-40°C 60mA 1000 hours 0/20

5 Temperature Humidity Operating

Life JESD22-A101C Tsp=85°C℃, RH=85% 60mA 1000 hours 0/20

6 High Temperature Operating Life JESD22-A108D Tsp=105°C 100mA 1000 hours 0/20

7 Power switching IEC62717:2014 Tsp= 105°C

30 sec on, 30 sec off 100mA 30000 cycles 0/20

8 Thermal Shock JESD22-A106B Ta=-40°C ~100°C;

Dwell : 15min; Transfer: 10sec - 200 cycles 0/20

9 Temperature Cycle JESD22-A104E

Ta=-40°C ~100°C; Dwell at extreme temperature: 15min; Ramp rate < 105°C/min - 200 cycles 0/20 10 Electrostatic Discharge JS-001-2012 HBM, 2KV, 1.5kΩ, 100pF, Alternately positive or negative - - 0/20 Table 9: Reliability Test Items and Conditions Passing Criteria Item Symbol Test Condition Passing Criteria Forward Voltage Vf 60mA ℃Vf<10% Luminous Flux Fv 60mA ℃Fv<30% Chromaticity Coordinates (x, y) 60mA ℃u’v’<0.007 Notes for Table 9: 1. Measurements are performed after allowing the LEDs to return to room temperature 2. Tsld : reflow soldering temperature; Ta : ambient temperature

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Figure 18 : Reflow Profile Reflow Characteristics Profile Feature Lead Free Assembly Temperature Min. (Ts_min) 160°C Temperature Max. (Ts_max) 205°C Time (ts) from Ts_min to Ts_max 60-150 seconds Ramp-Up Rate (TL to Tp) 3 °C/second Liquidus Temperature (TL) 220 °C Time (TL) Maintained Above TL 60-150 seconds Peak Temp( Tp) 260 °C max. Time (Tp) Within 5 °C of the Specified Classification Temperature (Tc) 25 seconds max.

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Packaging Figure 21: Emitter Reel Packaging Drawings package1 Note for Figure 21: 1. Drawings are not to scale. package2 4*55.25K 55.25K 13*4.25K

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) Design Resources Disclaimers Precautions Please contact your Bridgelux sales representative for assistance. MINOR PRODUCT CHANGE POLICY The rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization. CAUTION: CHEMICAL EXPOSURE HAZARD Exposure to some chemicals commonly used in luminaire manufacturing and assembly can cause damage to the LED emitter. Please consult Bridgelux CAUTION: EYE SAFETY Eye safety classification for the use of Bridgelux SMD LED emitter is in accordance with IEC specification EN62778: Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires are classified as Risk Group 1 when operat- ed at or below the maximum drive current. Please use appropriate precautions. It is important that employees working with LEDs are trained to use them safely. CAUTION: RISK OF BURN Do not touch the SMD LED emitter during operation. Allow the emitter to cool for a sufficient period of time before handling. The SMD LED emitter may reach elevated temperatures such that could burn skin when touched. CAUTION CONTACT WITH LIGHT EMITTING SURFACE (LES) Avoid any contact with the LES. Do not touch the LES of the emitter or apply stress to the LES (yellow phosphor resin area). Contact may cause damage to the emitter Optics and reflectors must not be mounted in contact with the LES (yellow phosphor resin area). STANDARD TEST CONDITIONS Unless otherwise stated, LED emitter testing is performed at the nominal drive current.

Bridgelux SMD 2835 0.2W 3V Thrive Product Data Sheet DS311 Rev. D (09/2023) About Bridgelux: Bridging Light and Life™ © 2023 Bridgelux, Inc. All rights reserved 2023. Product specifications are subject to change without notice. Bridgelux and the Bridgelux stylized logo design are registered trademarks of Bridgelux, Inc. All other trademarks are the property of their respective owners.

46410 Fremont Boulevard

Fremont, CA 94538 USA Tel (925) 583-8400 Fax (925) 583-8401 www.bridgelux.com At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires. For more information about the company, please visit bridgelux.com twitter.com/Bridgelux facebook.com/Bridgelux youtube.com/user/Bridgelux WeChat ID: BridgeluxInChina https:/ /www.linkedin.com/company/bridgelux-inc-_2