DS29 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Drive Circuitry and Connector Included
  • Choice of connector type
  • Light Source Sufficient for SAE/ECE/JIS HMSL Requirements
  • Rugged and Compact
  • Standard Design for Multiple Vehicle Applications
  • Life of Vehicle Light Source
  • Cost effective LED Solution for HMSL Applications Benefits HPWG-N 500 HPWG-N 506 HPWG-N 501 HPWG-N 507 HPWG-N 502 HPWG-N 508 HPWG-N 503 HPWG-N 550 HPWG-N 504 HPWG-N 551 HPWG-N 505 HPWG-N 552 SnapLED High Mount Stop Light Array Technical Data DS29 Using Lumiled's patented solderless clinch technology and SnapLED emitters, this six-LED linear assembly is an integrated LED stop-lamp solution complete with control circuitry. In addition to three types of power connector, the HMSL product line offers vehicle designers a choice of three flux output levels for use on exterior mounts or for implementation behind the rear glass. Furthermore, SnapLED offers two radiation pattern options for use where greater luminous intensity is required. Where enhanced reliability is needed, high- voltage protection circuitry is provided. SnapLED HMSL features a compact and rugged design and provides a cost effective source for vehicle high-mount-stop lamps. SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02)

Selection Guide (all lamps are TS AlInGaP Red-Orange and voltage is 12.8 volts) Total flux ΦV (lm)[1,2] Power Input (W) Part Number Description Min. Max. Min. Max. HPWG-N500 HMSL with pin connector 19.0 30.0 1.6 1.9 HPWG-N501 HMSL with pin connector 28.0 45.0 3.1 3.5 HPWG-N502 HMSL with pin connector 36.0 58.0 3.1 3.5 HPWG-N503 HMSL with varistor & hole connector 19.0 30.0 1.6 1.9 HPWG-N504 HMSL with varistor & hole connector 28.0 45.0 3.1 3.5 HPWG-N505 HMSL with varistor & hole connector 36.0 58.0 3.1 3.5 HPWG-N506 HMSL with wire connector 19.0 30.0 1.6 1.9 HPWG-N507 HMSL with wire connector 28.0 45.0 3.1 3.5 HPWG-N508 HMSL with wire connector 36.0 58.0 3.1 3.5 HPWG-N550 HMSL with narrow angle light beam 19.0 30.0 1.6 1.9 HPWG-N551 HMSL with narrow angle light beam 28.0 45.0 3.1 3.5 HPWG-N552 HMSL with narrow angle light beam 36.0 58.0 3.1 3.5 Circuit Schematic SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Notes: 1. Total integrated flux of the array at Vin = 12.8 V, R th junction-ambient = 12.9°C/W, which assumes that the array is attached to a thermally absorbing substrate. To determine junction temperature, multiply R th by power consumption and add to ambient temperature. 2. ΦV is the total usable flux measured after the lamp has stabilized

SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Side View Notes: 1. See HPWS-TH00 or HPWT-TH00 datasheet for emitter specifications. 2. Dimensions are in millimeters (inches). 3. Dimensions without tolerances are nominal.

Absolute Maximum Ratings at T A = 25 °C Parameter HPWG-N5xx Units DC Input Operating Voltage[1] 16 V Power Dissipation 7.0 W Reverse Voltage (IR = 200 μA) 500 V Operating Temperature Range(12.8V-13.5V) [2] -40 to +85 °C Storage Temperature Range -55 to +100 °C LED Junction Temperature 125 °C High Temperature Chamber 125 (2 hrs.) °C Optical and Electrical Characteristics Operational Forward Voltage VF (Volts) Color Dominant Wavelength λd (nm) [1,2] Device type Min. Max. Min. Max. HPWG-N50x 9 16 611 634 SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Notes: 1. 16V operation is allowed at Tambient=25°C only. 2. Temperature range for sustained operation based on Rth-junction- ambient=12.9°C/W. Notes: 1. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. The dominant wavelength does not vary between emitters by more than 8nm within the same assembly.

Lumileds is a world-class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands. Production capabilities in San Jose, California and Malaysia. Lumileds is pioneering the high-flux LED technology and bridging the gap between solid-state LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the Lighting world. SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) LUMILEDS www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6044 US Toll free: 877-298-9455 Europe: +31 499 339 439 Fax: 408-435-6855 Email us at info@lumileds.com Lumileds Lighting, LLC

370 West Trimble Road

San Jose, CA 95131 ©2002 Lumileds Lighting. All rights reserved. Lumileds Lighting is a joint venture between Agilent Technologies and Philips Lighting. Luxeon is a trademark of Lumileds Lighting, LLC. Product specifications are subject to change without notice. Lumileds may make process or materials changes affecting the performance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders.