DS28C16EVKIT MAXIM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- Demonstrates the Features of the DS28C16 DeepCover® SHA-3 I2C Authenticator
- Logs I2C Communication to Aid Firmware Designer’s Understanding of the DS28C16
- 1-Wire/I2C USB Adapter Creates a Virtual COM Port on Any PC
- Fully Compliant with USB Specification v2.0
- Software Runs on Windows 10, Windows 8, and Windows 7
- Convenient On-Board Test Points and TDFN Socket 319-100509; Rev 0; 4/20 Ordering Information appears at end of data sheet. Request DS28C16 Security User Guide Windows is a registered trademark and service mark of Microsoft Corporation. 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. Quick Start Required Equipment This section includes a list of recommended equipment and instructions on how to set up the Windows-based PC for the evaluation software.
- DS9481P-300# USB to 1-Wire/I2C adapter (included)
- DS9121BQ+ TDFN socket board (included)
- DS9121DQ+ TDFN socket board (included)
- DS28C16Q+ (five included)
- DS2477Q+ (five included)
- USB Type A to Micro-USB Type B cable (included)
- PC with a Windows 10, Windows 8, or Windows 7 operating system (64 bit or 32 bit) and a spare USB 2.0 or higher port
- Download DS28C16 Evaluation Kit Light Version software or request full DS28C16 Evaluation Kit software. QTY DESCRIPTION
5 DS28C16 DeepCover SHA-3 I2C Authenticator (8-pin TDFN)
5 DS2477Q+ DeepCover SHA-3 Coprocessor (6-pin TDFN)
1 DS9121BQ+ Socket Board (6-pin TDFN)
1 DS9121DQ+ Socket Board (8-pin TDFN)
1 DS9481P-300# USB to 1-Wire/I2C Adapter
1 USB Type-A to Micro-USB Type-B Cable
Click here for production status of specific part numbers.
Figure 4. Main Program Screen
Maxim Integrated │ 5 www.maximintegrated.com Evaluates: DS28C16 and DS2477DS28C16 Evaluation Kit #Denotes RoHS compliance. Table 1. Program Flows Table 2. I2C Communication Legend Configure Device Configure DS28C16 memory page data, memory page protections, and disable device setup. protections, MAN ID, and device version. Configure Coprocessor Configure DS2477 coprocessor with Master Secret for the Authenticate with Coprocessor flow. Authenticate with Coprocessor Authenticate DS28C16 with DS2477 coprocessor used for cryptographic and I2C operations. Authenticate with Software Authenticate DS28C16 with software used for cryptographic operations. Decrement Counter Decrement the DS28C16 counter. Page 2 must have been set in the Configure Device flow.
Ordering Information
Maxim Integrated │ 6 www.maximintegrated.com Evaluates: DS28C16 and DS2477DS28C16 Evaluation Kit DS28C16 EV Kit Bill of Materials DS28C16 EV Kit Schematic COMMENT DESCRIPTION DESIGNATOR PART NUMBER QUANTITY MANUFACTURE NAME DS28C16 8P TDFN 2x2 Socket DS28C16 8P TDFN 2x2 Socket U1 08QN50T22020 1 Plastronics 0.47uF CAP+,0.47uF,10%,16V,X7R,0603 C1 C0603C474K4RACTU 1 KEMET CORPORATION PMOD Input CONN RCPT .100" 6POS R/A SGL SN J1 SSW-106-02-T-S-RA 1 Samtec Inc. PMOD Output CONN HEADER 6POS .1" GOLD J2 TSW-150-08-G-S-RA 1 Samtec I2C PORT (DNP) CONN RCPT 4POS 0.1 TIN PCB R/A J3 SSQ-104-02-T-S-RA 1 Samtec Extra Port (DNP) CONN HEADER VERT 2POS 2.54MM J4 PEC02SAAN 1 Sullins Connector Solutions DNP RES SMD 10K OHM 1% 1/10W 0603 R1, R2 ERJ-3EKF1002V 2 Panasonic Electronic Components PMOD MaleGND GND SCLSCL GPIO SDA GND 3.3V 3.3V 0.47uF SDA SCL GPIO GND TP1 TP3 TP4TP2 GND 3.3V SDASCL 3.3V3.3V DNP 3.3V DNP 3.3V GND SDA SCL I2C PORT (DNP) SDA PMOD Female DNC3 DNC5 08QN50T22020 SDA 7VCC 8 GND4 EP SCL 6 DS28C16 8P TDFN 2x2 Socket DNC5 DNC3 1 Extra Port (DNP)
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. © 2020 Maxim Integrated Products, Inc. │ 7 Evaluates: DS28C16 and DS2477DS28C16 Evaluation Kit REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 4/20 Initial release —
Revision History
For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https://www.maximintegrated.com/en/storefront/storefront.html.