DS23 LUMILEDS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
High Luminance Uniform Color Low Power Consumption Low Thermal Resistance Low Profile Meets SAE/ECE/JIS Automotive Color Requirements Packaged in tubes for use with automatic insertion equipment Typical
Applications
Automotive Exterior Lighting Electronic Signs and Signals Specialty Lighting HPWA-MH00-XXXX HPWT-MH00-XXXX HPWA-DH00-XXXX HPWT-DH00-XXXX HPWT-RD00-XXXX HPWT-BH00-XXXX HPWT-MD00-XXXX HPWT-RL00-XXXX HPWT-DD00-XXXX HPWT-ML00-XXXX HPWT-BD00-XXXX HPWT-DL00-XXXX HPWT-RH00-XXXX HPWT-BL00-XXXX HPWN-MB00-XXXX HPWN-MC00-XXXX HPWN-MG00-XXXX
SuperFlux LEDs Technical Datasheet DS05 (11/07) 2 Selection Guide Table 1. TToottaall FFlluuxx ΦΦVV ((LLMM)) @@ TToottaall IInncclluuddeedd VViieeww AAnnggllee 7700 mmAA[1]((HHPPWWAA,, HHPPWWTT)) AAnnggllee θθ00..9900 VV 2θθ11//22 5500 mmAA ((HHPPWWNN)) ((DDeeggrreeeess)) [[22]] ((DDeeggrreeeess)) HPWA-MH00 AS AlInGaP 2.0 95 90 HPWA-DH00 Red-Orange 60 55 HPWT-RD00 44 X 88 25x68 HPWT-MD00 TS AlInGaP 3.8 100 70 HPWT-DD00 Red 60 50 HPWT-BD00 50 30 HPWT-RH00 44 X 88 25x68 HPWT-MH00 TS AlInGaP 5.0 100 70 HPWT-DH00 Red-Orange 60 50 HPWT-BH00 50 30 HPWT-RL00 44 X 88 25x68 HPWT-ML00 TS AlInGaP 2.5 100 70 HPWT-DL00 Amber 60 50 HPWT-BL00 50 30 HPWN-MB00 InGaN Blue 2.0 110 90 HPWN-MC00 InGaN Cyan 5.0 110 90 HPWN-MG00 InGaN Green 4.5 110 90 Notes: 1.Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. (RθJ-A = 200°C/W, TA = 25ºC) 2.θ0.90 V is the included angle at which 90% of the total luminous flux is captured.
SuperFlux LEDs Technical Datasheet DS05 (11/07) 3 Outline Drawings Notes: 1.Dimensions are in millimeters (inches). 2.Dimensions without tolerances are nominal.
SuperFlux LEDs Technical Datasheet DS05 (11/07) 4 Absolute Maximum Ratings at TA = 25ºC Table 2. Parameter HPWA HPWT HPWN Units DC Forward Current [1] 70 70 50 mA Power Dissipation 187 221 233 mW Reverse Voltage (IR = 100 μA) 10 10 0.55 V Operating Temperature Range -40 to +100 ºC Storage Temperature Range -55 to +100 ºC High Temperature Chamber 125ºC, 2 Hours LED Junction Temperature 125ºC Solder Conditions [2] Preheat Temperature 85 +/- 15°C, 20 sec (Max 30 sec) Solder Temperature 235 +/- 5°C, 2.5 +/- 0.5 sec [1.5mm (0.06 in) below seating plane Notes: 1.De-rate as shown in Figures 4a, 4b and 4c. 2.Detail wave soldering instructions found in Application Brief AB13. Optical Characteristics at TA = 25°C, IF = 70 mA (HPWA, HPWT), IF = 50 mA (HPWN), RθθJ-A = 200°C/W Table 3. TToottaall TToottaall LLuummiinnoouuss CCoolloorr,, TToottaall VViieewwiinngg SSttaabbiilliizzeedd IInnssttaannttaanneeoouuss IInntteennssiittyy ttoo DDoommiinnaanntt IInncclluuddeedd PPeeaakk AAnnggllee FFlluuxx FFlluuxx TToottaall FFlluuxx WWaavveelleennggtthh AAnnggllee θθ00..9900 VV WWaavveelleennggtthh 22θθ11//22 vv DDeevviiccee ΦΦvv ((llmm)) [1] ΦΦvv ((llmm)) [2] IIvv((ccdd))//ΦΦvv((llmm)) λλdd ((nnmm))[3] ((DDeeggrreeeess))[4] λλppeeaakk ((nnmm)) [3] ((DDeeggrreeeess)) HPWA-MH00 2.0 2.4 0.6 618 95 624 90 HPWA-DH00 0.8 60 55 HPWT-RD00 1.3 44x88 25x68 HPWT-MD00 3.8 4.6 0.6 630 100 640 70 HPWT-DD00 1.1 60 50 HPWT-BD00 2.0 50 30 HPWT-RH00 1.3 44x88 25x68 HPWT-MH00 5.0 6.2 0.6 620 100 626 70 HPWT-DH00 1.1 60 50 HPWT-BH00 2.0 50 30 HPWT-RL00 1.3 44x88 25x68 HPWT-ML00 2.5 4.0 0.6 594 100 596 70 HPWT-DL00 1.1 60 50 HPWT-BL00 2.0 50 30 HPWN-MB00 2.0 2.0 0.9 470 110 460 90 HPWN-MC00 5 5.2 0.9 505 110 503 90 HPWN-MG00 4.5 4.7 0.9 525 110 520 90 Notes: 1.Total Stabilized Flux Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized to Tj ~ 60°C. 2.Total Instantaneous Flux Φv is the total luminous flux output as measured with an integrating sphere at 20ms duration. 3.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device at Tj ~ 60 °C. 4.θ0.90 V is the included angle at which 90% of the total luminous flux is captured.
SuperFlux LEDs Technical Datasheet DS05 (11/07) 5 Electrical Characteristics at TA=25°C Table 4. FFoorrwwaarrdd VVoollttaaggee VVFF ((VVoollttss)) RReevveerrssee BBrreeaakkddoowwnn CCaappaacciittaannccee TThheerrmmaall @@ VVRR ((VVoollttss))[[11]] CC ((ppFF)) RReessiissttaannccee SSppeeeedd ooff IIFF == 7700mmAA ((HHPPWWAA,, HHPPWWTT)) @@ IIRR == 110000 VVFF == 00,, RRθθJJ--PPIINN RReessppoonnssee IIFF == 5500 mmAA ((HHPPWWNN)) μμAA FF == 11MMHHzz.. ((°°CC//WW)) τss ((nnss)) [[22]] DDeevviiccee HPWA-xH00 1.83 2.2 2.67 10 20 40 155 20 HPWT-xD00 2.19 2.6 3.03 10 20 40 125 20 HPWT-xH00 2.19 2.6 3.03 10 20 40 125 20 HPWT-xL00 2.19 2.6 3.15 10 20 40 125 20 Notes: 1.Operation in reverse bias is not recommended. 2.τs is the time constant, e -t/τs.
SuperFlux LEDs Technical Datasheet DS05 (11/07) 8 SuperFlux Product Binning This section provides bin selection assistance for SuperFlux LEDs. Additional category and label details for SuperFlux product can be found in AB20-7. Product availability varies by color and other factors, and not all bin-selection combinations are avai l- able. Contact your Philips Lumileds representative for further assistance. LLuummiinnoouuss FFlluuxx BBiinnss PPaarrtt BBiinn MMiinniimmuumm MMaaxxiimmuumm NNuummbbeerr CCooddee LLuummiinnoouuss FFlluuxx LLuummiinnoouuss FFlluuxx @@ 7700 mmAA ((HHPPWWAA,, HHPPWWTT)) @@ 7700 mmAA ((HHPPWWAA,, HHPPWWTT)) @@ 5500 mmAA ((HHPPWWNN)) [[11]] @@ 5500 mmAA ((HHPPWWNN)) [[11]] HPWA-MH00 B 1 1.8 HPWA-DH00 C 1.5 2.4 HPWT-RD00 D 2 3 HPWT-MD00 E 2.5 3.6 HPWT-DD00 F 3 4.2 HPWT-BD00 G 3.5 4.8 HPWT-RH00 E 2.5 3.6 HPWT-MH00 F 3 4.2 HPWT-DH00 G 3.5 4.8 HPWT-BH00 H 4 6.1 J 5 7.3 HPWT-RL00 C 1.5 2.4 HPWT-ML00 D 2 3 HPWT-DL00 E 2.5 3.6 HPWT-BL00 E 2.5 3.6 HPWN-MB00 - 1 - HPWN-MC00 - 3 - HPWN-MG00 - 3 - Note: 1.Total Luminous Flux as measured with an integrating sphere after the device has stabilized. T j ~ 60°C DDoommiinnaanntt WWaavveelleennggtthh BBiinnss,, RReedd--OOrraannggee MMiinniimmuumm DDoommiinnaanntt MMaaxxiimmuumm DDoommiinnaanntt BBiinn CCooddee WWaavveelleennggtthh ((nnmm)) WWaavveelleennggtthh ((nnmm)) 1 611 617 2 615 621 3 619 629 DDoommiinnaanntt WWaavveelleennggtthh BBiinnss,, RReedd MMiinniimmuumm DDoommiinnaanntt MMaaxxiimmuumm DDoommiinnaanntt BBiinn CCooddee WWaavveelleennggtthh ((nnmm)) WWaavveelleennggtthh ((nnmm)) 0 622 645 DDoommiinnaanntt WWaavveelleennggtthh BBiinnss,, AAmmbbeerr MMiinniimmuumm DDoommiinnaanntt MMaaxxiimmuumm DDoommiinnaanntt BBiinn CCooddee WWaavveelleennggtthh ((nnmm)) WWaavveelleennggtthh ((nnmm)) 1 587 591 2 589 594 9 592 595 3 592 597
SuperFlux LEDs Technical Datasheet DS05 (11/07) 9 FFoorrwwaarrdd VVoollttaaggee BBiinnss,, RReedd,, RReedd--OOrraannggee,, aanndd AAmmbbeerr @@ 7700 mmAA MMiinniimmuumm MMaaxxiimmuumm BBiinn CCooddee VVoollttaaggee VVoollttaaggee 1 2.19 2.43 2 2.31 2.55 3 2.43 2.67 4 2.55 2.79 5 2.67 2.91 6 2.79 3.03 7 2.91 3.15
©2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.luxeon.com www.lumiledsfuture.com For technical assistance or the location of your nearest sales office contact any of the following: North America: 1 888 589 3662 americas@futurelightingsolutions.com Europe: 00 800 443 88 873 europe@futurelightingsolutions.com Asia Pacific: 800 5864 5337 asia@futurelightingsolutions.com Japan: 800 5864 5337 japan@futurelightingsolutions.com Company Information LUXEON® is developed, manufactured and marketed by Philips Lumileds Lighting Company. Philips Lumileds is a world-class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands and production capabilities in San Jose and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high-flux LED technology leader and is dedicated to bridging the gap between solid-state LED technology and the lighting world. Philips Lumileds technology, LEDs and systems are enabling new applications and markets in the lighting world. Philips Lumileds may make process or materials changes affecting the perform- ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders.