DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Metal silicon junction, majority carrier conduction
  • For surface mounted applications
  • Low power loss, high efficiency
  • High forward surge current capability
  • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Absolute Maximum Ratings and Electrical characteristics Ratings at ambient temperature unless otherwise specified.Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20 % 25 C 20 40 Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Max Instantaneous Forward Voltage at 2 A Maximum DC Reverse Current at Rated DC Reverse Voltage Operating Junction Te mperature Range DS22W DS24W DS26W DS28W DS210W DS212W DS215W DS220W PINNING PIN

DESCRIPTION

Marking Code: DS22W ---S22 DS24W ---S24 DS26W ---S26 DS28W ---S28 DS210W ---S210 DS212W ---S212 DS215W ---S215 DS220W ---S220 Weight 17mg 0.0006 oz Simplified outline SOD-123FH and symbol T = 2 5 Ca T =100 Ca VRRM VRMS VDC IF(AV) IFSM VF IR Cj Tj Symbols TstgStorage Temperature Range 100 100 0.55 0 .70 0.85 220 -55 ~ +1 50 C 1 Measured at 1MHz and applied reverse voltage of 4 V D.C. 120 120 150 105 150 200 140 200 0.95 0.3 4050 70 84 S 2 2 0 DS22W THRU DS220W 2016-08 REV:O1 I2T A S10.37Typical Current Squared Time

FFig.4 Typical Junction Capacitance 0.1 Junction Capacitanc ( e pF) Reverse Voltage (V) 100 200 500 1001 DS22W/DS24W DS26W-DS220W T =25J eC 0.1 0 0.4 1.4 Fig.3 Typical Forward Characteristic Instaneou F s orward C urren ( tA ) Instaneous Forward Voltage (V) 1.0 DS22W/DS24W DS26W/DS28W DS210W/DS212W DS215W/DS220W Fig.1 Forward Current Derating Curve 0.5 1.0 1.5 2.0 2.5 3.0 0.0 25 50 75 100 125 150 Averag F e orwar C d urren ( tA ) Ambient Temperature ( eC) 6LQJOHSKDVHKDOIZ DYH+] UHVLVWLYHRULQGXFW L YHORDG /)0 10 1001 Fig.5 Maximum Non-Repetitive Peak Forward Surage Current kaeP) A( tnerruC egaruS drawroF Number of Cycles at 60Hz 8.3 ms Single Half Sine Wave (JEDEC Method) DS22W-DS28W DS210W-DS220W Fig.2 Typical Reverse Characteristics Instaneou sC urren ( tμ A )Reverse 20 40 60 800 T =25J eC T =100J eC Percent of Rated Peak Reverse Voltage ˄˅ 100 10 0 101 10 2 10 3 10 4 T= 7 5J eC DS22W/DS24W DS26W-DS220W RATING AND CHARACTERISTICS CURVES (DS22W THRU DS220W)

Plastic surface mounted package; 2 leads A A C ğ$// 5281' VAM e UNIT mm max min mil max min 7.9 4.7 114 102 150 138 ACDE HE ğ 1.1 0.8 e Bottom View HE ğ$// 5281' E D E gpad pad TopView 0.9 0.7 g g The recommended mounting pad size 2.0 (79) 1.2 (47) mm (mil)Unit ˖ 1.2 (47) 1.2 (47)

  • • Recommended condition of flow soldering 2 to 5 min more than 1 min less than 10s 100°C 120°C 245°C 265°C Temperatur o eS f olderin ( g° C ) Preliminary Heating Soldering Cooling (in air) 100 150 200 250 300
  • Recommended condition of reflow soldering Recommended peak temperature is over 245 eC. If peak temperature is below 245 °C, you may adjust the following parameters; time length of peak temperature (longer), time length of soldering (longer), thickness of solder paste (thicker) Temperature: 350°C Time: 3s max. Times: one time
  • Condition of hand soldering
  • Remark: Lead free solder paste (96.5Sn/3.0Ag/0.5Cu) Temperatur o eS f olderin ( g° C ) Pre Heating Rate 1 to 5°C / s Preliminary Heating 130 to 170°C, 50 to 120s Soldering 230°C 20 to 30s Cooling more than 60s Reflow Heating Rate 1 to 5°C / s Peak Temperature 245 to 260°C, 10s max. 100 150 200 250 300 2 times max.

PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE GROSS WEIGHT(Kg) EA PER REEL COMPONENT SPACE TAPE SPACE (mm) CARTON SIZE (mm) (mm) EA PER CARTON REEL DIA SOD-123FH 3,000 --- --- 178 390*205*31 120,000 6.964-W/T PACKING CODE (mm) EA PER BOX 15,000 INNER

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE