DS22 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Highest Flux per LED in the world
  • Very long operating life (up to100k hours)
  • Available in white, green, cyan, blue, red and amber
  • Highly efficient collimating optics provide tight beams
  • More energy efficient than incandescent and most halogen lamps
  • Low voltage DC operated
  • Cool beam, safe to the touch
  • Instant light (less than 100 ns)
  • Fully dimmable
  • No UV
  • Superior ESD protection Typical Applications
  • Decorative lighting
  • Architectural detail lighting
  • Uplighters/Downlighters/Orientation lighting
  • Entertainment lighting
  • Bollards Luxeon Ring is available in white, green, cyan, blue, red, and amber.

Luxeon Ring 2 Document #: DS22 (10/05) Mechanical Dimensions Notes: 1. Connector on board AMP type, code 2-179123-2; Mating connector – AMP receptacle housing assembly, code 173977-2 2. Slots in aluminum-core PCB for M3 or #4 mounting screw. 3. Drawing not to scale. 4. All dimensions are in millimeters. Ring with 12 LEDs Ring with 6 LEDs Notes: 1. Connector on board AMP type, code 2-179123-2; Mating connector – AMP receptacle housing assembly, code 173977-2 2. Slots in aluminum-core PCB for M3 or #4 mounting screw. 3. Drawing not to scale. 4. All dimensions are in millimeters.

Luxeon Ring 3 Document #: DS22 (10/05) Circuit Diagram Flux Characteristics at 700mA, Junction Temperature, T J = 25 oC Configuration Color Part Number Minimum Luminous Flux (lm) ΦV [1,2] Typical Luminous Flux (lm) ΦV [2] White LXHL-NWE6 140 250 Green LXHL- NM96 140 300 Ring 12-up Cyan LXHL- NE96 140 300 Blue [3] LXHL- NB96 40 100 Red LXHL- ND92 310 450 Amber LXHL- NL92 240 425 White LXHL- NWE7 70 125 Green LXHL- NM97 70 150 Ring 6-up Cyan LXHL- NE97 70 150 Blue [3] LXHL- NB97 20 50 Red LXHL- ND93 155 225 Amber LXHL- NL93 120 215 Notes: 1. Minimum luminous flux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of +/-10% for luminous flux measurements. 2. Flux values for Luxeon Ring with optics. Luxeon types with even higher luminous flux levels will become available in the future. Please consult your Lumileds Authorized Distributor or Lumileds sales representative for more information. 3. Minimum flux value for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, the minimum luminous flux will vary over the Lumileds’ blue color range. Luminous flux will range from minimums of 30 lm for 12-Up and 15 lm for 6-Up Rings at 460nm to typicals of 150 lm for 12-Up and 75 lm for 6-Up Rings at 480nm due to this effect. Although the luminous power efficiency is lower in the short blue wavelength range, radiometric power efficiency increases as wavelength decreases. For more information, consult the Luxeon Design Guide, available upon request. Ring with 12 LEDs 1 2 1 2 Ring with 6 LEDs

Luxeon Ring 4 Document #: DS22 (10/05) Optical Characteristics at 700mA, Junction Temperature, T J = 25 oC Dominant Wavelength[1] λD or Color Temperature[2] CCT Spectral Half- width[3] (nm) temperature coefficient of dominant wavelength (nm/oC) Viewing Angle per LED[4] (Degrees) Typical Candela on Axis per LED[8] Color Min. Typ. Max. ∆λ1/2 ∆λD/ ∆ΤJ 2θ 1/2 (Cd) White 4500 K 5500 K 10,000 K --- --- 10 250 Green 520 nm 530 nm 550 nm 35 0.04 10 600 Cyan 490 nm 505 nm 520 nm 30 0.04 10 600 Blue 460 nm 470 nm 490 nm 25 0.04 10 200 [5] Red 620.5 nm 627 nm 645 nm 20 0.05 10 660 Amber 584.5 nm 590 nm 597 nm 14 0.09 10 540 Electrical Characteristics at 700mA, Junction Temperature, T J = 25 oC Ring 12-Up Forward Voltage[1] (V) VF Dynamic resistance[2] Temp coefficient of forward voltage[3] (mV/oC) Thermal resistance, junction to board[4] Color Part Number Min. Typ. Max. (Ω) RD ∆VF/ ∆TJ (oC/W) RθJ-B White LXHL-NWE6 16 21 24 3 -12 1.7 Green LXHL-NM96 16 21 24 3 -12 1.7 Cyan LXHL-NE96 16 21 24 3 -12 1.7 Blue LXHL-NB96 16 21 24 3 -12 1.7 Red LXHL-ND92 14 18 21 7.2 -12 1.9 Amber LXHL-NL92 14 18 21 7.2 -12 1.9 Ring 6-Up Forward Voltage (V) VF Dynamic resistance[1] Temp coefficient of forward voltage[2] (mV/oC) Thermal resistance, junction to board[3] Color Part Number Min. Typ. Max. (Ω) RD ∆VF/ ∆TJ (oC/W) RθJ-B White LXHL-NWE7 8 10 12 1.5 -6 3.3 Green LXHL-NM97 8 10 12 1.5 -6 3.3 Cyan LXHL-NE97 8 10 12 1.5 -6 3.3 Blue LXHL-NB97 8 10 12 1.5 -6 3.3 Red LXHL-ND93 7 9 11 3.6 -6 3.8 Amber LXHL-NL93 7 9 11 3.6 -6 3.8 Absolute Maximum Ratings Parameter White/Green/Cyan/Blue Red/Amber DC Forward Current ( mA) [1] 700 770 Peak Pulsed Forward Current (mA) 1000 1100 Average Forward Current ( mA) 700 700 ESD Sensitivity [2] ± 16,000V HBM LED Junction Temperature ( oC) 135 120 Aluminum-Core PCB Temperature (oC) 105 105 Storage & Operating Temperature ( oC) -40 to +75 -40 to +75 Notes: 1. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. 2. CRI (Color Rendering Index) for White product is 70. 3. Spectral width at ½ of the peak intensity. 4. θ ½ is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 5. Typical candela on axis per LED for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, candela values will vary over the LumiLeds blue color range. 6. All red and amber products built with Aluminum Indium Gallium Phosphide (AlInGaP). 7. All white, green, cyan and blue products built with Indium Gallium Nitride (InGaN). 8. All power light sources represented here are IEC825 Class 2 for eye safety. Notes: 1. Lumileds maintains a tolerance of +/-0.06 Volts per LED for voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See Figures 3a and 3b . 3. Measured between 25 oC ≤ TJ ≤ 110 oC at I F = 700mA. 4. To determine the junction temperature, multiply by total array power. For best optical and lifetime performance, additional heat sinking is required . Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For more information, consult Luxeon Design Guide, available upon request. 2. LEDs are not designed to be driven in reverse bias. Please consult Lumileds’ information.

Luxeon Ring 7 Document #: DS22 (10/05) Representative Spatial Radiation Pattern Average Lumen Maintenance Characteristics Lifetime for solid-state lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial light output remaining after a specified period of time. Lumileds projects that Luxeon products will deliver on average 70% lumen maintenance at 50,000 hours of operation. This performance is based on independent test data, Lumileds historical data from tests run on similar material systems, and internal Luxeon reliability testing. This projection is based on constant current 350 mA operation per LED (700 mA for Ring) with junction temperature maintained at or below 90°C. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Figure 7. Representative Spatial Radiation Pattern for one Luxeon LED with optics, all colors. Note: For more detailed technical information regarding Luxeon radiation patterns, please consult your Lumileds Authorized Distributor or Lumileds sales representative. 100 Angular Displacement - Degrees Relative Intensity (%) -40 0 40-30 -20 -10 10 20 30

Luxeon Ring 8 Document #: DS22 (10/05) About Luxeon Luxeon is the new world of solid-state lighting (LED) technology. Luxeon Power Light Source Solutions offer huge advantages over conventional lighting and huge advantages over other LED solutions. Luxeon enables partners to create and market products that, until now, were impossible to create. This means the opportunity to create products with a clear competitive advantage in the market. Products that are smaller, lighter, sleeker, cooler, and brighter. Products that are more fun to use, more efficient, and more environmentally conscious than ever before possible! Company Information Luxeon is developed, manufactured and marketed by Lumileds Lighting, LLC. Lumileds is a world-class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands. Production capabilities in San Jose, California and Malaysia. Lumileds is pioneering the high-flux LED technology and bridging the gap between solid state LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the Lighting world. Lumileds may make process or materials changes affecting the performance or other characteristics of Luxeon. These products supplied after such change will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. Lumileds www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6111 US Toll free: 1-888-589-3662 Asia: 800-5864-5337 Europe: 00 800 443 88 873 Fax: +1 408-435-6855 Email us at info@lumileds.com Lumileds Lighting, U.S., LLC

370 West Trimble Road

San Jose, CA 95131 Product specifications are subject to change without notice.