DS2106SY IRI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

FEATURES

¾ Wide current range ¾ High voltage ratings up to 4000 V ¾ High surge current capabilities ¾ Diffused junction ¾ Hockey PUK version TYPICAL APPLICATIONS ¾ Co nverters ¾ Power supplies ¾ Machine tool controls ¾ High power drives ¾ Medium traction applications INTERNATIONAL STANDARD RECOVERY DIODE (Y ) TECHNICAL DATA VRRM (V) VRSM (V) www.rectifierindia.com April 2011 DEVICE TYPE DS2106SY 4040 4000 3800 3600 DS2106SY 3838 DS2106SY 3636 39 00 3700 DS2106SY 4100 CURRENT RATINGS Tcase = 75oC unless otherwise stated Symbol Parameter Conditions Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current UnitsMax. Half wave resistive load 3830 A - 6016 A - 5597 A Half wave resistive load 2525 A - 3966 A - 3421 A A ll data sheet.com

www.rectifierindia.com April 2011 Symbol Parameter Conditions Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value IF Continuous (direct) forward current UnitsMax. Half wave resistive load, Tcase = 100oC 2850 A Tcase = 100oC 4475 A Tcase = 100oC 4190 A Half wave resistive load, Tcase = 100oC 1920 A Tcase = 100oC 3014 A Tcase = 100oC 2500 A Tcase = 100oC unless otherwise stated SURGE RATINGS Conditions 10ms half sine; Tcase = 150oC VR = 50% VRRM - 1/4 sine 10ms half sine; Tcase =150oC VR = 0 Max. UnitsSymbol Parameter IFSM Surge (non-repetitive) forward current I2tI 2t for fusing IFSM Surge (non-repetitive) forward current I2t I2t for fusing A2s 62.5 kA 12.5 x 106 A2s 50.0 kA 1.96 x 106 THERMAL AND MECHANICAL DATA dc Conditions Min. Max. Units oC/W- 0.019Anode dc Clamping force 43.0kN with mounting compoundThermal resistance - case to heatsinkRth(c-h) 0.002Double side - 150 oC Tvj Virtual junction temperature Tstg Storage temperature range Reverse (blocking) Single side Thermal resistance - junction to caseRth(j-c) Single side cooled Symbol Parameter Clamping force 38.0 47.0 kN -55 150 oC Forward (conducting) 160 oC - 0.004 oC/W oC/W Cathode dc - 0.019 oC/W Double side cooled - 0.0095 oC/W STANDARD RECOVERY DIODE DS2106SY A ll data sheet.com

www.rectifierindia.com April 2011 CHARACTERISTICS Forward voltage Peak reverse current Parameter μC5000QS Total stored charge Symbol VFM IRRM Irr Peak reverse recovery current - 150 A At VRRM, Tcase = 150oC - 250 mA - 1.15 VAt 3000A peak, Tcase = 25oC Conditions Min. Max. Units At Tvj = 150˚C - VTO Threshold voltage rT Slope resistance 0.118 m Ω At Tvj = 150˚C - 0.75 V IF = 2000A, dIRR/dt = 3A/μs Tcase = 150˚C, VR = 100V CURVES Fig.2 Maximum (limit) forward characteristics Fig.3 Dissipation curves VFM Equation:- VFM = A + Bln (IF) + C.IF+D.√IF Where A = –0.15357 B = 0.177571 C = 0.000179 D = –0.01294 these values are valid for Tj = 125˚C for IF 500A to 5000A Instantaneous forward voltage, VF -(V) 1000 2000 3000 4000 5000Instantaneous forward current, IF - (A) Measured under pulse conditions Tj = 25˚C Tj = 150˚C 0 2000 4000 6000 Mean forward current, IF(AV) - (A) 2000 4000 6000 8000 10000Mean power dissipation - (W) dc Half wave 3 phase 6 phase STANDARD RECOVERY DIODE DS2106SY A ll data sheet.com

www.rectifierindia.com April 2011 Fig.4 Total stored charge Fig.5 Maximum reverse recovery current Fig.7 Maximum (limit) transient thermal impedance - junction to case Fig.6 Surge (non-repetitive) forward current vs time (with 50% VRRM at Tcase 150˚C) 1010.10.010.001 Time - (s) 0.1 0.01 0.001

0.0001 Thermal impedance - (˚C/W)

d.c. Halfwave 3 phase 120˚ 6 phase 60˚ Effective thermal resistance Junction to case ˚C/W Double side 0.0095 0.0105 0.0112 0.0139 Single side 0.019 0.020 0.0207 0.0234 0.1 1.0 10 100 Rate of decay of forward current, dIF/dt - (A/µs) 100000 10000 1000 Stored charge, QS - (µC) Conditions: Tj = 150˚C VR = 100V IF = 2000A IRM IF dIF/dt QS 0.1 1.0 10 100 Rate of decay of forward current, dIF/dt - (A/µs) 1000 100 Reverse recovery current, Irr - (A) Conditions: T j = 150˚C VR = 100V IF = 2000A 1 1 01 2 3 51 0 2 0 5 0 100 120 I2t value - (A2s x 106) ms Cycles at 50Hz Duration Peak half sine forward current - (kA) I2t = Î2 x t I2t STANDARD RECOVERY DIODE DS2106SY A ll data sheet.com

www.rectifierindia.com April 2011 PACKAGE OUTLINE All dimensions are in mm. Hole Ø3.6 x 2.0 deep (One in each electrode) 37.7 36.0 Cathode Anode Ø73 nom Ø112.5 max Ø73 nom Nominal weight: 1600g Clamping force: 50kN ±10% Package outine type code: Y STANDARD RECOVERY DIODE DS2106SY Plot No 151, Udyog Kendra, Extn.-II, Ecotech-III, Greater Noida-201306 Toll Free No.: 1800 3070 9989 , Fax : 011-27491404 E-mail : insel@rectifierindia.com, sales@rectifierindia.com Insel Rectifiers (India) Pvt. Ltd. (An ISO 9001:2015, ISO 14001:2015 Certified Company) A ll data sheet.com