DS21 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Highest Flux per LED in the world
  • Very long operating life (up to100k hours)
  • Available in White, Green, Blue, Cyan, Red, and Amber
  • Highly efficient collimating optics provide tight beams
  • More Energy Efficient than Incandescent and most Halogen lamps
  • Low voltage DC operated
  • Cool beam, safe to the touch
  • Instant light (less than 100 ns)
  • Fully dimmable
  • No UV
  • Superior ESD protection Typical Applications
  • Cove lighting
  • Indoor and outdoor commercial and residential architectural lighting
  • Security lighting
  • Under shelf lighting Luxeon Line is available in white, green, blue, cyan, red, and amber.

Luxeon Line 2 Document #: DS21 (10/05) Mechanical Dimensions Circuit Diagram Notes: 1. Connector on board AMP type, code 2-179123-2; Mating connector – AMP receptacle housing assembly, code 173977-2. 2. Slots in aluminum-core PCB for M3 or #4 mounting screw. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. Luxeon Lines are provided with a jumper inserted in the right-hand connector to complete the electrical circuit. In this configuration the connector marked with a "+" should be used for connection to the power supply. This jumper may be removed and inserted in the left connector if required for the application, or removed completely to allow for daisy chain connection to drive multiple Luxeon Lines in series. AMP 2-pin CT Connector AMP 2-pin CT Connector 12 12 AMP 2-pin CT connector

Luxeon Line 3 Document #: DS21 (10/05) Flux Characteristics at 700mA, Junction Temperature, T J = 25 oC Color Luxeon line Minimum Luminous Flux (lm) ΦV [1,2] Typical Luminous Flux (lm) ΦV [2] White LXHL-NWE9 140 250 Green LXHL-NM99 140 300 Cyan LXHL-NE99 140 300 Blue [3] LXHL-NB99 40 100 Red LXHL-ND95 310 450 Amber LXHL-NL95 240 425 Optical Characteristics at 700mA, Junction Temperature, T J = 25 oC Typical Dominant Wavelength[1] λD or Color Temperature[2] CCT Spectral Half-Width[3] (nm) Temperature Coefficient of Dominant Wavelength (nm/oC) Viewing Angle Per LED[4] (degree) Typical Candela on Axis per LED[8] color Min. Typ. Max. ∆λ1/2 ∆λD/ ∆ΤJ 2θ 1/2 (Cd) White 4500 k 5500 k 10,000 k --- --- 10 250 Green 520 nm 530 nm 550 nm 35 0.04 10 600 Cyan 490 nm 505 nm 520 nm 30 0.04 10 600 Blue 460 nm 470 nm 490 nm 25 0.04 10 200 [5] Red 620.5 nm 627 nm 645 nm 20 0.05 10 660 Amber 584.5 nm 590 nm 597 nm 14 0.09 10 540 Notes: 1. Minimum luminous flux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of +/-10% for luminous flux measurements. 2. Flux values for Luxeon Line with optics. Luxeon types with even higher luminous flux levels will become available in the future. Please consult your Lumileds Authorized Distributor or Lumileds sales representative for more information. 3. Minimum flux value for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, the minimum luminous flux will vary over the Lumileds’ blue color range. Luminous flux will vary from a minimum of 30 lm at 460 nm to a typical of 150 lm at 480 nm due to this effect. Although the luminous power efficiency is lower in the short blue wavelength range, radiometric power efficiency increases as wavelength decreases. For more information, consult the Luxeon Design Guide, available upon request. Notes: 1. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. 2. CRI (Color Rendering Index) for White product is 70. 3. Spectral width at ½ of the peak intensity. 4. θ ½ is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 5. Typical candela on axis per LED for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, candela values will vary over the Lumileds blue color range. 6. All red and amber products built with Aluminum Indium Gallium Phosphide (AlInGaP). 7. All white, green, cyan and blue products built with Indium Gallium Nitride (InGaN). 8. All power light sources represented here are IEC825 Class 2 for eye safety.

Luxeon Line 4 Document #: DS21 (10/05) Electrical Characteristics at Junction Temperature, T J = 25 oC Part Forward Voltage VF (V) [1] Dynamic resistance[2] Temperature coefficient of forward voltage[3] (mV/oC) Array Thermal resistance, junction to board[4] Forward test current Number Color Min. Typ. Max. (Ω) RD ∆VF/ ∆TJ (oC/W) RθJ-B (mA) IF lxhl-nwE9 White 16 21 24 3 -12 1.7 700 lxhl-nm99 Green 16 21 24 3 -12 1.7 700 lxhl-ne99 Cyan 16 21 24 3 -12 1.7 700 lxhl-nb99 Blue 16 21 24 3 -12 1.7 700 lxhl-nd95 Red 14 18 21 7.2 -12 1.9 700 lxhl-nl95 Amber 14 18 21 7.2 -12 1.9 700 Absolute Maximum Ratings Parameter White/Green/ Cyan/Blue Red/Amber DC Forward Current (mA) [1] 700 770 Peak Pulsed Forward Current (mA) 1000 1100 Average Forward Current (mA) 700 700 ESD Sensitivity [2] ± 16,000V HBM LED Junction Temperature ( oC) 135 120 Aluminum-Core PCB Temperature (oC) 105 105 Storage & Operating Temperature ( oC) -40 to +75 -40 to +75 Wavelength Characteristics Notes: 1. Lumileds maintains a tolerance of +/-0.06 Volts per LED for voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See Figures 2a and 2b. 3. Measured between 25 oC ≤ TJ ≤ 110 oC at I F = 700mA. 4. To determine the junction temperature, multiply by total array power. For best optical and lifetime performance, additional heat sinking is required. Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For more information, consult Luxeon OEM Guide, available upon request. 2. LEDs are not designed to be driven in reverse bias. Please consult Lumileds’ information. 0.0 0.2 0.4 0.6 0.8 1.0 400 450 500 550 600 650 700 Wavelength (nm) Relative Spectral Power Distribution RED AMBER BLUE GREENCYAN Figure 1a. Relative Intensity vs. Wavelength. Figure 1b. White Color Spectrum of Typical CCT Part, Integrated Measurement. 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Relative Specrtal Power Distribution

Luxeon Line 7 Document #: DS21 (10/05) Average Lumen Maintenance Characteristics Lifetime for solid-state lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial light output remaining after a specified period of time. Lumileds projects that Luxeon products will deliver on average 70% lumen maintenance at 50,000 hours of operation. This performance is based on independent test data, Lumileds historical data from tests run on similar material systems, and internal Luxeon reliability testing. This projection is based on constant current 350 mA operation per LED (700 mA for Line) with junction temperature maintained at or below 90°C. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance.

Luxeon Line 8 Document #: DS21 (10/05) About Luxeon Luxeon is the new world of solid-state lighting (LED) technology. Luxeon Power Light Source Solutions offer huge advantages over conventional lighting and huge advantages over other LED solutions. Luxeon enables partners to create and market products that, until now, were impossible to create. This means the opportunity to create products with a clear competitive advantage in the market. Products that are smaller, lighter, sleeker, cooler, and brighter. Products that are more fun to use, more efficient, and more environmentally conscious than ever before possible! Company Information Luxeon is developed, manufactured and marketed by Lumileds Lighting, U.S., LLC. Lumileds is a world-class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands. Production capabilities in San Jose, California and Malaysia. Lumileds is pioneering the high-flux LED technology and bridging the gap between solid-state LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the Lighting world. Product specifications are subject to change without notice. Lumileds may make process or materials changes affecting the performance or other characteristics of Luxeon. These products supplied after such change will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. Lumileds www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6111 US Toll free: 1-888-589-3662 Asia: 800-5864-5337 Europe: 00 800 443 88 873 Fax: +1 408-435-6855 Email us at info@lumileds.com Lumileds Lighting, U.S., LLC

370 West Trimble Road

San Jose, CA 95131