DS2 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- The tap splice is placed over the existing wire, the additional wire inserted and the block crimped with pliers
- The tap splice is crimped over the wire as above. A 6.3 mm push-on blade can then be inserted into the female blade socket. Suitable for splicing or as a break-in test lead
- Simple to use - apply with pliers
- Excellent electrical connection with out cutting tap or run wires Preparation To make a top connection as illustrated Slip the run wire through the side slot and the top wire through the end of the connector. Make the connection by driving down the U element over the conductors, flush with the top of the connector. Snap over the hinged cover Specification Table DS1 DS2 Diagram Parameter DS1 DS2 Maximum Electric Current AWG 22 20 18 AWG 18 16 14 AMP 3 4 7 AMP 17 18 30 Voltage Rating 600V Max. Temperature Rating 105°C Insulation Material PP Terminal Material Brass Surface Treatment Tin Plated Insulation Colour Red Light Blue Wire Range 22-18AWG (0.5-0.75mm²) 18-14AWG (0.75-2.5mm²) Terminal Thickness 0.8mm Dimensions : MillimetresDS1
Page <2> V1.018/11/20 Tap Splices Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Tap Splice, 22-18AWG (0.5-0.75mm²), Red, PK25 DS1 Tap Splice, 18-14AWG (0.75-2.5mm²), Light Blue, PK25 DS2 DS2 Dimensions : Millimetres Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.