DS195 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

No. E352519 DS195 LUXEON SunPlus CoB Line Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. Features and BeneFIts PrImary aPPlIcatIons 115° angle for directional light distribution for greenhouse applications Horticulture Ideal solution for more directional horticulture applications that require a high light output and wattage luXeon sunPlus coB line CoBs engineered to deliver the precise wavelengths of light needed to improve crop yield LUXEON SunPlus CoB Line LEDs are purpose-built to enable ease of system design for Horticulture applications. LUXEON SunPlus CoB Line offers the only CoBs available today that are binned and tested based on Photosynthetic Photon Flux (PPF). LUXEON SunPlus CoB Line includes three different sizes: 1208 with an LES of 15mm, 1211 with an LES of 19mm, and 1825 with an LES of 32mm.

DS195 LUXEON SunPlus CoB Line Product Datasheet 20170911 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS195 LUXEON SunPlus CoB Line Product Datasheet 20170911 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON SunPlus CoB Line LEDs are tested and binned with a DC drive current specified below at a junction temperature, Tj, of 85°C: 900mA – LUXEON CoB 1208 1200mA – LUXEON CoB 1211 2250mA – LUXEON CoB 1825 Part Number Nomenclature Part numbers for LUXEON SunPlus CoB Line follow the convention below: L 2 C 5 – A A B B C C C C D E E F F Where: A A – designates product type (SP=SunPlus) B B – designates color (P1=Purple) C C C C – designates product configuration (example: 1208, 1211, 1825) D – designates options for product specification E E – designates light emitting surface (LES) size (15=15mm, 19=19mm, 32=32mm) F F – designates options for product specification Therefore, the following part number is used for a LUXEON SunPlus CoB 1211 with a 19mm LES: L 2 C 5 – S P P 1 1 2 1 1 E 1 9 0 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON SunPlus CoB Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

Table 1. Product performance of LUXEON SunPlus CoB Line at specified test current, T j=85ºC .

  1. Lumileds maintains a tolerance of ±6.5% on μmol/s for LUXEON SunPlus CoB Line.
  2. PAR is the photosynthetic active radiation from 400 to 700nm.
  3. Light emitting surface (LES) is the inner diameter (phosphor area) inside the dam.
  4. PPF in blue spectrum (420–480nm) ranges from 10–15% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 12.5%.

Table 2. Optical characteristics for LUXEON SunPlus CoB Line at specified test current, T j=85°C .

  1. Total angle at which 90% of total luminous flux is captured.
  2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON SunPlus CoB Line at specified test current, T j=85°C .

  1. Lumileds maintains a tolerance of ±2% on forward voltage measurements.
  2. Measured between 25°C and 85°C.
  3. Thermal resistance is measured between junction and the bottom of the LUXEON CoB substrate.

Table 4 . Absolute maximum ratings for LUXEON SunPlus CoB Line .

  1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
  2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher. – The average current for each cycle does not exceed the maximum allowable DC forward current. – The maximum amplitude of the ripple does not exceed 20% of the maximum allowable DC forward current. Figure 1. Typical normalized power vs. wavelength for LUXEON SunPlus CoB Line at specified test current, T j=85°C .

DS195 LUXEON SunPlus CoB Line Product Datasheet 20170911 ©2017 Lumileds Holding B.V. All rights reserved. 8 Figure 3c . Typical forward current vs . forward voltage for L2C5-SPP11825G3200 at T j=85°C .

DS195 LUXEON SunPlus CoB Line Product Datasheet 20170911 ©2017 Lumileds Holding B.V. All rights reserved. 11 xxxx 1825 Figure 6c . Mechanical dimensions for L2C5-SPP11825G3200 . Packaging and Labeling Information LUXEON SunPlus CoB Line LEDs are packaged in tubes then in a carton box. Each tube contains a specified number of LEDs. The LEDs in each tube come from a single category code, ensuring they are all well-matched for light output, color, and forward voltage. Each tube contains a rubber stopper at one end. The tube label has both alphanumeric and bar code information. The carton boxes have printed information providing part numbers with CAT codes that indicate luminous flux, color and forward voltage bins. Table 5 . Number of LEDs per tube for LUXEON SunPlus CoB Line . Part numBer total unIts Per tuBe total tuBes Per Inner BoX total unIts Per Inner BoX L2C5-xxxx1208E1500 20 5 100 L2C5-xxxx1211E1900 10 5 50 L2C5-xxxx1825G3200 10 5 50 Notes for Figure 6c: 1. Drawings not to scale. 2. All dimensions are in millimeters.

DS195 LUXEON SunPlus CoB Line Product Datasheet 20170911 ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents. About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com.