DS180 BRIDGELUX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 17

Technical content

Datasheet sections

EB Series™ Square Product Data Sheet DS180

EB Series Square modules are designed for use in applications where high efficacy and robustness are required. These modules use high-efficacy Bridgelux 2835 SMDs to achieve over 170 lm/W (nominal), which enables designers and fixture manufacturers to meet DLC efficacy requirements. They are designed primarily for indoor commercial applications. Available in 182mm (7.2 inches) and 284mm (11.2 inches) square form factors, these modules have several different LED configurations specifically targeted for certain applications. These modules are easily mountable and offer reusable poke-in connectors. The modules have long lifetimes of greater than 50,000 hours. EB Series™

Features

  • High efficacy up to 173 lm/W (nominal)
  • Utilizes a robust aluminum core PCB with superior thermal properties
  • Available in 4000K and 5000K
  • Wide lumen range with 2x overdrive capability
  • Long lifetime (L80, B50 > 50,000 hours) Benefits
  • Achieve up to 180 lm/W by under-driving
  • Heat-sinking may not be required at low drive currents
  • Reliable use at elevated currents for greater design flexibility
  • Easy installation using mounting holes and poke-in connectors

Bridgelux EB Series Square modules are fully engineered devices that provide consistent thermal and optical performance on an engineered mechanical platform. The square products incorporate several features to simplify design integration and assembly. Please visit www.bridgelux.com for more information on the EB Series family of products. Product Nomenclature The part number designation for Bridgelux EB Square is explained as follows: Nominal CCT 40 = 4000 K 50 = 5000 K 1 2 3 4 - 5 6 7 8 9 10 - 11 12 13 14 15 16 - 17 – 18 BXEB SQ0182 4000 B3C Product Family Module Version B = Initial Gen 3 = 3 SDCM Flux Indicator 4000 = 4000 lm 5000 = 5000 lm Module Configuration C, D, E Nominal Dimensions SQ = Square 0182 = 182 mm 0284 = 284 mm 40 E Minimum CRI E = 80 – – – – Mounting locations Re-usable connector Designed to comply with global safety standards for creepage and clearance distances Multiple case temperature measurement points

Table 1: Product Performance (Tc = 25° C) Notes for Table 1: 1. Nominal CCT as defined by ANSI C78.377-2011. 2. Data is at nominal test current where temperature of center case temperature point Tc= 25° C. 3. Bridgelux maintains a ± 7% tolerance on flux data. Part Number Nominal CCT1 (K) Min CRI Typical Flux2,3 Tc = 25º C (lm) Nominal Drive Current (mA) Typical Vf (V) Typical Power (W) Typical Efficacy (lm/W) BXEB-SQ0182-40E4000-C-B3 4000 80 4450 700 36.7 25.7 173 BXEB-SQ0182-50E4000-C-B3 5000 BXEB-SQ0284-40E6000-C-B3 4000 80 6500 700 53.6 37.5 173 BXEB-SQ0284-50E6000-C-B3 5000 BXEB-SQ0284-40E6000-D-B3 4000 950 39.5 BXEB-SQ0284-50E6000-D-B3 5000 BXEB-SQ0284-40E6000-E-B3 4000 BXEB-SQ0284-50E6000-E-B3 5000

Electrical Characteristics

Table 2: Electrical Characteristics Part Number Drive Current (mA) Forward Voltage Tc2 = 25º C (V) 1, 2,3 Typical Coefficient of Forward Voltage4 ∆Vf/∆T (mV/º C) Driver Selection Voltages5 (V) Minimum Typical Maximum Vf Min, Hot Tc2 = 85º C (V) Vf Max, Cold Tc2 = -40º C (V) BXEB-SQ0182-xxE4000-C-B3 BXEB-SQ0284-xxE6000-C-B3 BXEB-SQ0284-xxE6000-D-B3 BXEB-SQ0284-xxE6000-E-B3 Notes for Table 2: 1. Voltage minimum and maximum are provided for reference only and are not a guarantee of performance. 2. Bridgelux maintains a tolerance of ± 0.1 V on forward voltage data. 3. This product has been designed and manufactured per IEC 62031:2014. The working voltage designated for the insulation is 60 V d.c. The maximum allowable voltage across the module must be determined in the end product application. 4. Typical coefficient of forward voltage tolerance is ± 0.1 mV for nominal current. 5. Vf min hot and max cold values are provided as reference only and are not guaranteed. These values are provided to aid in driver design and selec- tion over the operating range of the product.

Table 3: Maximum Ratings Parameter Maximum Rating Storage Temperature -40°C to +85°C Operating Case Temperature2 (Tc) 85°C Soldering Temperature 350°C or lower for a maximum of 5 seconds Maximum Reverse Voltage Modules are not designed to be driven in reverse bias Maximum Drive Current BXEB-SQ0182-xxE4000-C-B3 BXEB-SQ0284-xxE6000-C-B3 BXEB-SQ0284-xxE6000-D-B3 BXEB-SQ0284-xxE6000-E-B3 1400 mA 1900 mA Notes for Table 3: 1. For IEC 62717 requirement, please consult your Bridgelux sales representative. 2. Lumen maintenance (L70) and lifetime predictions are valid for drive current and case temperature conditions used for LM-80 testing as included in the applicable LM-80 test report for the SMDs used in the modules. Contact your Bridgelux sales representatives for LM-80 report.

Figure 9: Typical Spatial Radiation Pattern Notes for Figure 9: 1. Typical viewing angle is 120⁰. 2. The viewing angle is defined as the off axis angle from the centerline where Iv is ½ of the peak value. 20% 40% 60% 80% 100% 120% -100 -80 -60 -40 -20 0 20 40 60 80 100 Relative Intensity Angle (°)

Figure 10: Typical Color Spectra, 80 CRI 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 380 430 480 530 580 630 680 730 780 Relative Intensity Wavelength (nm) 40E 50E Note for Figure 10: 1. Color spectra measured at nominal current for Tc = 85°C

Table 5: Connector and wiring Mechanical Dimensions Parameter Specification Input wire cross-section 20-24 AWG Wire strip length 6.5-7.5 mm Notes for Figures 11, 12 & 13: 1. Unless otherwise specified, the tolerances are ± 0.10mm. 2. Drawings are not to scale. 3. Drawing dimensions are in millimeters. Figure 13: Drawing for BXEB-SQ0284-xxE6000-E-B3 Part Number Board Length Board Width Board Height BXEB-SQ0182-xxE4000-C-B3 182 mm 182 mm 4.2 mm BXEB-SQ0284-xxE6000-C-B3 284 mm 284 mm 5.5 mm BXEB-SQ0284-xxE6000-D-B3 284 mm 284 mm 5.5 mm BXEB-SQ0284-xxE6000-E-B3 284 mm 284 mm 5.5 mm Table 4: Module dimensions

Figure 14: Color Point T est Bins in CIE 1931 xy Color Space

3 SDCM Bin 4000K 5000K

CCT Range 3851K - 4130K 4835K - 5215K Center Point (x, y) (0.382, 0.380) (0.3445, 0.355) ANSI Bin (for reference only) (3710K - 4260K) (4745K - 5311K) Table 6: Bin Coordinates and Associated Typical CCT Notes for Table 6: 1. Color binning at solder point temperature Tsp of SMDs at 25°C. 2. Bridgelux maintains a tolerance of ± 0.007 on x and y color coordinates in the CIE 1931 color space. 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 CIE y CIE x 4000K

3 SDCM

Bridgelux has developed a comprehensive set of application notes and design resources to assist customers in successfully designing with the EB Series product family. For a list of resources under development, visit www.bridgelux.com. Optical Source Models Optical source models and ray set files are available for all Bridgelux products. For a list of available formats, visit www.bridgelux.com. MINOR PRODUCT CHANGE POLICY The rigorous qualification testing on products of- fered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues prod- uct optimization. CAUTION: CHEMICAL EXPOSURE HAZARD Exposure to some chemicals commonly used in luminaire manufacturing and assembly can cause damage to the LED linear. Please consult Bridgelux Application Note for additional information. CAUTION: EYE SAFETY Eye safety classification for the use of Bridgelux EB Series is in accordance with IEC/TR62778: Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires. EB Series modules are classified as Risk Group 1 when operated at or below the maximum drive current. Please use appropriate precautions. It is important that employees working with LEDs are trained to use them safely. CAUTION: RISK OF BURN Do not touch the EB Series modules during operation. Allow the linear to cool for a sufficient period of time before handling. The EB Series modules may reach elevated temperatures such that could burn skin when touched. 3D CAD Models Three dimensional CAD models depicting the product outline of all Bridgelux EB Series modules are available in both IGES and STEP formats. Please contact your Bridgelux sales representative for assistance. CAUTION CONTACT WITH LIGHT EMITTING SURFACE (LES) Avoid any contact with the LES. Do not touch the LES of the linear or apply stress to the LES (yellow phosphor resin area). Contact may cause damage to the linear. Optics and reflectors must not be mounted in contact with the LES (yellow phosphor resin area). Optical devices may be mounted on the top surface of the EB Square. Use the mechanical features of the linear housing, edges and/or mounting holes to locate and secure optical devices as needed. STANDARD TEST CONDITIONS Unless otherwise stated, linear testing is performed at the nominal drive current.

About Bridgelux: Bridging Light and Life™ © 2019 Bridgelux, IncAll rights reserved. Product specifications are subject to change without notice. Bridgelux and the Bridgelux stylized logo design are registered trade- marks of Bridgelux, Inc. EB Series and Bridging Light and Life are trademarks of Bridgelux, Inc. All other trademarks are the property of their respective owners. Bridgelux EB Series Square Data Sheet DS180 Rev. A (06/2019)

46430 Fremont Blvd

Fremont, CA 94538 USA Tel (925) 583-8400 Fax (925) 583-8401 www.bridgelux.com At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires. For more information about the company, please visit bridgelux.com twitter.com/Bridgelux facebook.com/Bridgelux youtube.com/user/Bridgelux linkedin.com/company/bridgelux-inc-_2 WeChat ID: BridgeluxInChina