DS171 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

No. E352519 DS171 LUXEON SunPlus Series for Horticulture Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. luXEon SunPlus Series for Horticulture LEDs engineered to deliver the precise wavelengths of light needed to improve crop yield The LUXEON SunPlus Series is purpose-built to enable ease of system design for Horticulture applications. The LUXEON SunPlus Series offers the only LEDs available today that are binned and tested based on Photosynthetic Photon Flux (PPF). The LUXEON SunPlus Series includes two different packages: LUXEON SunPlus 20 Line, which is 2.0mm x 2.0mm and LUXEON SunPlus 35 Line, which is 3.5mm x 3.5mm. The LUXEON SunPlus Series includes options for single driver solutions and multi-channel, color tunable solutions. FEaturES and BEnEFItS PrImary aPPlIcatIonS 150° angle for uniform light distribution for greenhouse applications Horticulture Two package options 2.0mm x 2.0mm and 3.5mm x 3.5mm for design freedom

DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20171212 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20171212 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON SunPlus Series LEDs are tested and binned with a DC drive current and junction temperature specified below: LUXEON SunPlus 20 Line – 350mA, Tj=85°C LUXEON SunPlus 35 Line – 100mA, Tj=25°C Part Number Nomenclature Part numbers for LUXEON SunPlus Series follow the convention below: L 1 S P – A A A B B 0 C C D 0 0 0 0 Where: A A A – designates color (FRD=Far Red, DRD=Deep Red, PRP=Purple, RYL=Royal Blue, LME=Lime and CW9=Cool White) B B – designates typical percentage of PPF in the blue spectrum (420 to 480nm) vs. the total PPF in the Photosynthetic Active Radiation (PAR) region (400 to 700nm), which applies only to purple LEDs (00=2.5%, C C – designates package size (20=2.0mm2 and 35=3.5mm2) D – designates polarity (R=reverse polarity) Therefore, the following part number is used for a LUXEON SunPlus 20 Royal Blue with a package size of 2.0mm2: L 1 S P – R Y L 0 0 0 2 0 0 0 0 0 0 Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON SunPlus Series is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

Table 2. Optical characteristics for LUXEON SunPlus Series at specified test conditions.

  1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.
  2. Total angle at which 90% of the total luminous flux is captured.
  3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Table 3. Electrical and thermal characteristics for LUXEON SunPlus Series at specified test conditions.

  1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
  2. Measured between 25°C and 85°C.

DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20171212 ©2017 Lumileds Holding B.V. All rights reserved. 5 Absolute Maximum Ratings Table 4a. Absolute maximum ratings for LUXEON SunPlus 20 Line. ParamEtEr Far rEd dEEP rEd royal BluE lImE cool WHItE DC Forward Current [1, 2] 700mA 1050mA 700mA 1050mA 1050mA 1225mA 1225mA Peak Pulsed Forward Current [1, 3] 875mA 1300mA 875mA 1300mA 1300mA 1550mA 1550mA LED Junction Temperature [1] (DC & Pulse) 135°C 120°C 135°C 120°C 135°C 135°C 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40 to 125°C -40 to 125°C -40 to 125°C -40 to 110°C -40 to 125°C LED Storage Temperature -40°C to 135°C Soldering Temperature 20°C to 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Table 4b. Absolute maximum ratings for LUXEON SunPlus 35 Line. ParamEtEr PurPlE Far rEd dEEP rEd royal BluE lImE DC Forward Current [1, 2] 300mA 180mA 180mA 200mA 200mA Peak Pulsed Forward Current [1, 3] 350mA 225mA 225mA 480mA 240mA LED Junction Temperature [1] (DC & Pulse) 125°C 115°C 115°C 125°C 125°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Operating Case Temperature [1] -40°C to 105°C -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 105°C LED Storage Temperature -40°C to 105°C -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 105°C Soldering Temperature 20°C to 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Tables 4a and 4b: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude of ≤15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse-on time is ≤5ms per cycle and the duty cycle is ≤50%. 4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not exceed 5V and the reverse current is less than 220uA. 5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.

DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20171212 ©2017 Lumileds Holding B.V. All rights reserved. 12 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. All emitters packaged within a reel are of the same bin combination. LUXEON SunPlus 35 Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the format below: A B C Where: A – designates PPF bin (example: B=0.50 to 0.55 µmol/s, C=0.55 to 0.60 µmol/s) B – designates peak wavelength bin (example: 3=440 to 445nm, 4=445 to 450nm, 5=450 to 455nm) Therefore, a LUXEON SunPlus 35 Royal Blue with a PPF range of 0.50 to 0.55 µmol/s, peak wavelength of 445 to 450nm and a forward voltage range of 3.00 to 3.25V has the following CAT code: B 4 G LUXEON SunPlus 20 Line and all other LUXEON SunPlus 35 Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B B C Where: A – designates PPF bin (example: L=1.80 to 1.90 µmol/s, M=1.90 to 2.00 µmol/s) B B – designates color or peak wavelength bin (example: 40=445 to 450nm, 50=450 to 455nm) C – designates forward voltage bin (example: E=2.50 to 2.70V, F=2.70 to 2.90V) Therefore, LUXEON SunPlus 20 Royal Blue with a PPF range of 1.90 to 2.00 µmol/s, peak wavelength of 445 to 450nm and a forward voltage range of 2.70 to 2.90V has the following CAT code: M 4 0 F

DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20171212 ©2017 Lumileds Holding B.V. All rights reserved. 13 PPF Bins Tables 5a and 5b list the standard PPF bins for LUXEON SunPlus Series. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 5a. PPF bin definitions for LUXEON SunPlus 20 Line. BIn PPF [1] (µmol/s) mInImum maXImum A 0.80 0.90 B 0.90 1.00 C 1.00 1.10 D 1.10 1.20 E 1.20 1.30 F 1.30 1.40 G 1.40 1.50 H 1.50 1.60 J 1.60 1.70 K 1.70 1.80 L 1.80 1.90 M 1.90 2.00 N 2.00 2.10 P 2.10 2.20 Q 2.20 2.30 Notes for Table 5a: 1. Lumileds maintains a tolerance of ±6.5% on µmol/s measurements. Table 5b. PPF bin definitions for LUXEON SunPlus 35 Line. BIn PPF [1] (µmol/s) mInImum maXImum X 0.30 0.35 Y 0.35 0.40 Z 0.40 0.45 A 0.45 0.50 B 0.50 0.55 C 0.55 0.60 D 0.60 0.65 E 0.65 0.70 F 0.70 0.75 G 0.75 0.80 H 0.80 0.85 J 0.85 0.90 K 0.90 0.95 L 0.95 1.00 Notes for Table 5b: 1. Lumileds maintains a tolerance of ±7.5% on µmol/s measurements.

Table 6. Color bin definitions for LUXEON SunPlus Series.

  1. Lumileds maintains a tester tolerance of + 0.005 on color bin coordinates

Table 7. Peak wavelength bins for LUXEON SunPlus Series at specified test conditions.

  1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.

Table 8. Forward voltage bin definitions for LUXEON SunPlus Series at specified test conditions.

  1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements for LUXEON SunPlus 20 Line and ±0.1V for LUXEON SunPlus 35 Line.

Table 9. Reflow profile characteristics for LUXEON SunPlus Series. Table 10. Moisture sensitivity levels for LUXEON SunPlus Series. Figure 8. Visualization of the acceptable reflow temperature profile as specified in Table 9.

©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20171212 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents. About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com.