DS15BA101 TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
150 Mbps
1.5 Gbps
100-ohm Differential Cable (i.e. CAT5e/6/7, Twinax) 50-ohm Coaxial Cable (i.e. Belden 9914) Max Cable Loss ~ 35 dB @ 750 MHz DS15BA101 www.ti.com SNLS234J –OCTOBER 2006–REVISED APRIL 2013 DS15BA1011.5GbpsDifferentialBufferwithAdjustableOutputVoltage Check forSamples: DS15BA101 1FEATURES DESCRIPTION The DS15BA101 isa high-speeddifferentialbufferfor 2• Data Rates from DC to1.5+Gbps cabledriving,leveltranslation,signalbuffering,and• Differentialor Single-endedInput signalrepeatingapplications.Its fullydifferential
- AdjustableOutput Amplitude signalpath ensures exceptionalsignalintegrityand noise immunity and itdrivesboth differentialand• Single3.3VSupply single-endedtransmissionlinesat data rates in• Industrial-40°C to+85°C Temperature excessof1.5Gbps.
- Low Power: 150 mW (typ)at1.5Gbps Output voltageamplitudeis adjustablevia a single• Space-saving3 x 3 mm WSON-8 Package externalresistorforleveltranslationand cabledriving applicationsinto50-ohm single-endedand 100-ohm APPLICATIONS differentialmode impedances.
- Cable ExtensionApplications The DS15BA101 is powered from a single3.3V
- LevelTranslation supplyand consumes 150 mW (typ)at 1.5 Gbps. It operates over the full−40°C to +85°C industrial• SignalBufferingand Repeating temperaturerangeand isavailableina space saving• SecurityCameras 3x3 mm WSON-8 package. TypicalApplication Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsof Texas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2Alltrademarksarethepropertyoftheirrespectiveowners. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2006–2013,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.
SNLS234J –OCTOBER 2006–REVISED APRIL 2013 www.ti.com These deviceshave limitedbuilt-inESD protection.The leadsshouldbe shortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamage totheMOS gates. AbsoluteMaximum Ratings(1) SupplyVoltage −0.5Vto3.6V InputVoltage(allinputs) −0.3VtoVCC +0.3V OutputCurrent 28 mA StorageTemperatureRange −65°C to+150°C JunctionTemperature +150°C Lead Temperature (Soldering4 Sec) +260°C θJA WSON-8 +90.7°C/W Package ThermalResistance θJC WSON-8 +41.2°C/W ESD Rating(HBM) 5 kV ESD Rating(MM) 250V (1) "AbsoluteMaximum Ratings"arethoseparametervaluesbeyond whichthelifeand operationofthedevicecannotbe ensured.The statinghereinofthesemaximums shallnotbe construedtoimplythatthedevicecan orshouldbe operatedatorbeyond thesevalues. The tableof"ElectricalCharacteristics"specifiesacceptabledeviceoperatingconditions. Recommended OperatingConditions SupplyVoltage(VCC – GND): 3.3V±5% OperatingFreeAirTemperature(TA) DS15BA101SD −40°C to+85°C DC ElectricalCharacteristics Over SupplyVoltageand OperatingTemperatureranges,unlessotherwisespecified.(1)(2) Symbol Parameter Conditions Reference Min Typ Max Units VICM InputCommon Mode Voltage See Note(3) IN+,IN- VCC –0.8 VVID/2 VID DifferentialInputVoltageSwing 100 2000 mV P−P VOS OutputCommon Mode Voltage OUT+, OUT- VCC – VVOUT /2 VOUT OutputVoltage Single-ended,25Ω load 400 mV P-PR VO = 953Ω 1%, Single-ended,25Ω load 800 mV P-PR VO = 487Ω 1%, ICC SupplyCurrent See Note(4) 45 49 mA (1) Currentflowintodevicepinsisdefinedas positive.Currentflowoutofdevicepinsisdefinedas negative.Allvoltagesarestated referencedtoGND. (2) TypicalvaluesarestatedforVCC = +3.3V and TA = +25°C. (3) Specificationisensuredby characterization. (4) Maximum ICC ismeasured atVCC = +3.465V and TA = +70°C.
2 SubmitDocumentationFeedback Copyright© 2006–2013,Texas InstrumentsIncorporated
ProductFolderLinks:DS15BA101
(GND) DAP DS15BA101 www.ti.com SNLS234J –OCTOBER 2006–REVISED APRIL 2013 AC ElectricalCharacteristics Over SupplyVoltageand OperatingTemperatureranges,unlessotherwisespecified(1). Symbol Parameter Conditions Reference Min Typ Max Units DR MAX Maximum Data Rate See Note(2) IN+,IN- 1.5 2.0 Gbps tLHT OutputLow toHighTransition 20% – 80% (3) OUT+, OUT- 120 220 psTime tHLT OutputHightoLow Transition 120 220 psTime tPLHD PropagationLow toHighDelay See Note(2) 0.95 1.10 1.35 ns tPHLD PropagationHightoLow Delay See Note(2) 0.95 1.10 1.35 ns tTJ TotalJitter 1.5Gbps 26 psP-P (1) TypicalvaluesarestatedforVCC = +3.3V and TA = +25°C. (2) Specificationisensuredby characterization. (3) Specificationisensuredby characterizationand verifiedby test. CONNECTION DIAGRAM Figure1. 8-Pad WSON See NGQ Package PIN DESCRIPTIONS Pin # Name Description 1 IN+ Non-invertinginputpin. 2 IN- Invertinginputpin. 3 GND Circuitcommon (groundreference). 4 R VO Outputvoltageamplitudecontrol.Connecta resistortoVCC tosetoutputvoltage. 5 VCC Positivepower supply(+3.3V). 6 GND Circuitcommon (groundreference). 7 OUT- Invertingoutputpin. 8 OUT+ Non-invertingoutputpin. Copyright© 2006–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:DS15BA101
50: 50: 100: Differential T-Line LVPECL 100: OUT+ OUT- DS15BA101 IN+ IN- 50:50: VCC CML3.3V or CML2.5V 100: 100: Differential T-Line OUT+ OUT- DS15BA101 IN+ IN- 100: 100: Differential T-Line LVDS DS15BA101 SNLS234J –OCTOBER 2006–REVISED APRIL 2013 www.ti.com DEVICE OPERATION INPUT INTERFACING The DS15BA101 acceptseitherdifferentialorsingle-endedinput.The inputsareself-biased,allowingforsimple AC orDC coupling.DC-coupledinputsmust be keptwithinthespecifiedcommon-mode range.The IN+ and IN- pinsare self-biasedat approximately2.1V withVCC = 3.3V.The followingthreefiguresillustratetypicalDC- coupledinterfacetocommon differentialdrivers. Figure2. TypicalLVDS DriverDC-Coupled InterfacetoDS15BA101 Input Figure3. TypicalCML DriverDC-Coupled InterfacetoDS15BA101 Input Figure4. TypicalLVPECL DriverDC-Coupled InterfacetoDS15BA101 Input OUTPUT INTERFACING The DS15BA101 uses currentmode outputs.Single-endedoutputlevelsare 400 mV P-P intoAC-coupled100Ω differentialcable(withR VO = 953Ω) or intoAC-coupled50Ω coaxialcable(withR VO = 487Ω).Outputlevelis controlledby thevalueoftheR VO resistorconnectedbetween theR VO and VCC . The R VO resistorshouldbe placedas closeas possibletotheR VO pin.Inaddition,thecopperintheplanelayers below the R VO networkshouldbe removed to minimizeparasiticcapacitance.The followingfigureillustrates typicalDC-coupled interfaceto common differentialreceiversand assumes thatthe receivershave high impedance inputs.Whilemost receivershave a common mode inputrangethatcan accomodate CML signals,it is recommended to check respectivereceiver'sdatasheetpriorto implementingthe suggested interface implementation.
4 SubmitDocumentationFeedback Copyright© 2006–2013,Texas InstrumentsIncorporated
ProductFolderLinks:DS15BA101
0.1 PF50:50:487:
100:
1 PF 1 PF
50: 1 PF OUT+ OUT- CAP+ CAP- 0.1 PF VCCVCC 25: 50: Coaxial Cable R VO DS15BA101 OUT- IN+ IN- OUT+
0.1 PF50:50:953:
100: 1 PF 1 PF 1 PF 1 PF DS15EA101 IN+ IN- 100: 1 PF OUT+ OUT- CAP+ CAP- 0.1 PF VCCVCC 100: Differential TP Cable R VO OUT+ OUT- CML or LVPECL or LVDS IN+ IN- 50:50: VCC 100: 100: Differential T-Line DS15BA101 DS15BA101 www.ti.com SNLS234J –OCTOBER 2006–REVISED APRIL 2013 Figure5. TypicalDS15BA101 Output DC-Coupled Interfacetoan LVDS, CML or LVPECL Receiver CABLE EXTENDER APPLICATION The DS15BA101 togetherwiththeDS15EA101 forma cableextenderchipsetoptimizedforextendingserialdata streams from serializer/deserializer(SerDes)pairsand fieldprogrammable gate arrays(FPGAs) over 100Ω differential(i.e.CAT5e/6/7and twinax)and 50Ω coaxialcables.SettingcorrectDS15BA101 outputamplitudeand propercableterminationare keys foroptimaloperation.The followingtwo figuresshow recommended chipset configurationfor100Ω differentialand 50Ω coaxialcables. Figure6. Cable ExtenderChipsetConnection Diagram for100Ω DifferentialCables Figure7. Cable ExtenderChipsetConnection Diagram for50Ω CoaxialCables Copyright© 2006–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:DS15BA101
SNLS234J –OCTOBER 2006–REVISED APRIL 2013 www.ti.com REFERENCE DESIGN There isa completereferencedesign(P/N:DriveCable02EVK)availableforevaluationof the cableextender chipset(DS15BA101 and DS15EA101). Formore information,visithttp://www.ti.com/tool/drivecable02evk. TypicalPerformance Figure8.1.5Gbps DifferentialDS15BA101 Output Figure9.1.5Gbps Single-endedDS15BA101 Output R VO = 953Ω,H:100 ps /DIV,V:100 mV /DIV R VO = 487Ω,H:100 ps /DIV,V:100 mV /DIV Figure10.2.0Gbps DifferentialDS15BA101 Output Figure11.2.0Gbps Single-endedDS15BA101 Output R VO = 953Ω,H:100 ps /DIV,V:100 mV /DIV R VO = 487Ω,H:100 ps /DIV,V:100 mV /DIV
6 SubmitDocumentationFeedback Copyright© 2006–2013,Texas InstrumentsIncorporated
ProductFolderLinks:DS15BA101
www.ti.com SNLS234J –OCTOBER 2006–REVISED APRIL 2013
REVISION HISTORY
Changes from RevisionI(April2013)toRevisionJ Page Copyright© 2006–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:DS15BA101
www.ti.com 12-Apr-2013 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) Op Temp (°C) Top-Side Markings (4) Samples DS15BA101SD/NOPB ACTIVE WSON NGQ 8 1000 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 BA101 DS15BA101SDE/NOPB ACTIVE WSON NGQ 8 250 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 BA101 DS15BA101SDX/NOPB ACTIVE WSON NGQ 8 4500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 BA101 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 Pack Materials-Page 1
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS15BA101SD/NOPB WSON NGQ 8 1000 213.0 191.0 55.0 DS15BA101SDE/NOPB WSON NGQ 8 250 213.0 191.0 55.0 DS15BA101SDX/NOPB WSON NGQ 8 4500 367.0 367.0 35.0 PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 Pack Materials-Page 2
www.ti.com SDA08A (Rev A)
Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,enhancements,improvementsand other changes toitssemiconductorproductsand servicesperJESD46, latestissue,and todiscontinueany productorserviceperJESD48, latest issue.Buyersshouldobtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allsemiconductorproducts(alsoreferredtohereinas “components”)aresoldsubjecttoTI’s termsand conditionsofsale suppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitscomponents tothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’s terms and conditionsofsaleofsemiconductorproducts.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessary tosupportthiswarranty.Exceptwhere mandated by applicablelaw,testingofallparametersofeach component isnotnecessarily performed. TIassumes no liabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithBuyers’productsand applications,Buyersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany patentright,copyright,mask work right,or otherintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIcomponents orservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensetouse such productsorservicesora warrantyor endorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalteration and isaccompaniedby allassociatedwarranties,conditions,limitations,and notices.TIisnotresponsibleorliableforsuch altered documentation.Informationofthirdpartiesmay be subjecttoadditionalrestrictions. ResaleofTIcomponents orserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatcomponent orservice voidsallexpressand any impliedwarrantiesfortheassociatedTIcomponent orserviceand isan unfairand deceptivebusinesspractice. TIisnotresponsibleorliableforany such statements. Buyeracknowledgesand agreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryand safety-relatedrequirements concerningitsproducts,and any use ofTIcomponents initsapplications,notwithstandingany applications-relatedinformationorsupport thatmay be providedby TI.Buyerrepresentsand agreesthatithas allthenecessaryexpertisetocreateand implementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresand theirconsequences,lessenthelikelihoodoffailuresthatmightcause harm and takeappropriateremedialactions.BuyerwillfullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofany TIcomponents insafety-criticalapplications. Insome cases,TIcomponents may be promotedspecificallytofacilitatesafety-relatedapplications.Withsuch components,TI’s goalisto helpenablecustomerstodesignand createtheirown end-productsolutionsthatmeet applicablefunctionalsafetystandardsand requirements.Nonetheless,such components aresubjecttotheseterms. No TIcomponents areauthorizedforuse inFDA ClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties have executeda specialagreementspecificallygoverningsuch use. OnlythoseTIcomponents whichTIhas specificallydesignatedas militarygradeor“enhanced plastic”aredesignedand intendedforuse in military/aerospaceapplicationsorenvironments.Buyeracknowledgesand agreesthatany militaryoraerospaceuse ofTIcomponents whichhave not been so designatedissolelyattheBuyer's risk,and thatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIhas specificallydesignatedcertaincomponents as meetingISO/TS16949 requirements,mainlyforautomotiveuse.Inany case ofuse of non-designatedproducts,TIwillnotbe responsibleforany failuretomeet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotiveand Transportationwww.ti.com/automotive Amplifiers amplifier.ti.com Communicationsand Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP ® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energyand Lighting www.ti.com/energy Clocksand Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP ApplicationsProcessors www.ti.com/omap TIE2E Community e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2013,Texas InstrumentsIncorporated