DS14C202

DS14C202 NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

n Uses only four small 0.1 µF capacitors for DC to DC converter n Operates over 128 kbit/sec n Pin compatible with MAX202, MAX232A and others n Single +5V power supply n Low power n DS14C202 meets EIA/TIA-232-E and ITU-T V.28 standards n CMOS technology n Package efficiency — 2 drivers and 2 receivers n Available in Plastic DIP and Narrow SOIC packages n Extended temperature range: −40˚C to +85˚C n ESD ≥ 6.0 kV HBM Connection Diagram Functional Diagram DS012622-1 Order Number DS14C202TN or DS14C202TM See NS Package Number N16A or M16A DS012622-2 ADVANCE INFORMATION June 1998 DS14C202 Low Power +5V Powered EIA/TIA-232 Dual Driver/Receiver DS14C202 © 1998 National Semiconductor Corporation DS012622 www.national.com 1 PrintDate=1998/06/22 PrintTime=10:23:03 42589 ds012622 Rev. No. 0 cmservProof 1

Absolute Maximum Ratings(Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (V CC ) −0.3V to 6V Supply Voltage (V+)( V CC − 0.3V) to +14V Supply Voltage (V−) +0.3V to −14V Short Circuit Duration, DOUT Continuous Driver Input Voltage −0.3V to (V CC + 0.3V) Driver Output Voltage (V + + 0.3V) to (V− − 0.3V) Receiver Input Voltage ±25V Receiver Output Voltage −0.3V to (V CC + 0.3V) ESD Rating (HBM, 1.5 kΩ , 100 pF) ≥ 6.0 kV Junction Temperature +150˚C Maximum Package Power Dissipation@ 25˚C (Note 6) N Package TBD M Package TBD Storage Temperature Range −65˚C to +150˚C Lead Temperature (Soldering, 4 sec.) +260˚C Recommended Operating Conditions Min Max Units Supply Voltage, (VCC ) 4.5 5.5 V Operating Free Air Temp. (TA) DS14C202T −40 +85 ˚C Electrical Characteristics(Notes 2, 5) Over recommended operating conditions, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units DEVICE CHARACTERISTICS V + Positive Power Supply R L = 3k Ω ,C 1 – C 4= 0.1 µF, DIN = 0.8V 9.0 V V− Negative Power Supply R L = 3k Ω ,C 1 – C 4= 0.1 µF, DIN = 2.0V −8.5 V ICC VCC Supply Current No Load 15 mA DRIVER CHARACTERISTICS V IH High Level Input Voltage 2.0 V CC V VIL Low Level Input Voltage GND 0.8 V IIH High Level Input Current V IN ≥ 2.0V −30 +30 µA IIL Low Level Input Current V IN ≤ 0.8V −30 +30 µA VOH High Level Output Voltage R L = 3k Ω 5.0 8.0 V VOL Low Level Output Voltage R L = 3k Ω −7.0 −5.0 V IOS + Output High Short Circuit Current VOUT = 0V, VIN = 0.8V (Note 3) −5.0 −15 −30 mA IOS − Output Low Short Circuit Current VOUT = 0V, VIN = 2.0V 5.0 11 30 mA R O Output Resistance −2V ≤ VOUT ≤ +2V, VCC = 0V = GND or Open 300 Ω RECEIVER CHARACTERISTICS V TH Input High Threshold Voltage 1.7 2.4 V VTL Input Low Threshold Voltage 0.8 1.5 V VHY Hysteresis 0.2 0.4 1.0 V R IN Input Resistance −15V ≤ VIN ≤ +15V 3.0 4.7 7.0 k Ω IIN Input Current V IN = +15V +2.14 +3.5 +5.0 mA VOH High Level Output Voltage V IN = −3V, IOH = −3.2 mA 3.5 4.5 V VIN = −3V, IOH = −20 µA 4.0 4.9 V VOL Low Level Output Voltage V IN = +3V, IOL = +3.2 mA 0.15 0.4 V PrintDate=1998/06/22 PrintTime=10:23:03 42589 ds012622 Rev. No. 0 cmservProof 2 www.national.com 2

VCC (Pin 16) Power supply pin for the device, +5V (±10% ). V+ (Pin 2) Positive supply for EIA/TIA-232-E drivers. Recommended external capacitor: C4= 0.1 µF (≥ 6.3V). Capacitor value should not be less than 0.1 µF. This supply is not intended to be loaded externally. (Note 9) V − (Pin 6) Negative supply for EIA/TIA-232-E drivers. Recommended external capacitor: C3= 0.1 µF (≥ 16V). Capacitor value should not be less than 0.1 µF. This supply is not intended to be loaded externally. (Note 9) C1+, C1− (Pins 1, 3) External capacitor connection pins. Recommended capaci- tor: C1 = 0.1 µF (≥ 6.3V). Capacitor value should not be less than 0.1 µF. (Note 9) C2+, C2− (Pins 4, 5) External capacitor connection pins. Recommended capaci- tor: C2 = 0.1 µF (≥ 16V). Capacitor value should not be less than 0.1 µF. (Note 9) D IN1, DIN2 (Pins 11, 10) Driver input pins are TTL/CMOS compatible. Inputs of un- used drivers may be left open, an internal active pull-up re- sistor (500 kΩ minimum, typically 1 MΩ ) pulls input HIGH. Output will be LOW for input pins. D OUT 1, DOUT 2 (Pins 14, 7) Driver output pins conform to EIA/TIA-232-E levels. R IN1, RIN2 (Pins 13, 8) Receiver input pins accept EIA/TIA-232-E input voltages (±25V). Receivers feature guaranteed hysteresis of 200 mV. Unused receiver input pins may be left open. Internal input resistor (5 kΩ ) pulls input LOW, providing a fail-safe HIGH output. R OUT 1, ROUT 2 (Pins 12, 9) Receiver output pins are TTL/CMOS compatible. Receiver output HIGH voltage is specified for both CMOS and TTL load conditions. GND (Pin 15) Ground Pin. Note 9:All capacitor values have tolerances of less than±20% . Typical Application Information DS012622-7 PrintDate=1998/06/22 PrintTime=10:23:03 42589 ds012622 Rev. No. 0 cmservProof 4 Book Extract End www.national.com 4

Typical Connection Diagram DS012622-8 5 www.national.com PrintDate=1998/06/22 PrintTime=10:23:03 42589 ds012622 Rev. No. 0 cmservProof 5 Book Extract End

THIS PAGE IS IGNORED IN THE DATABOOK PrintDate=1998/06/22 PrintTime=10:23:03 42589 ds012622 Rev. No. 0 cmservProof 6

Physical Dimensionsinches (millimeters) unless otherwise noted Order Number DS14C202TM Order Number DS14C202TN 7 www.national.com 7 PrintDate=1998/06/22 PrintTime=10:23:03 42589 ds012622 Rev. No. 0 cmservProof 7

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or sys- tems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose fail- ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 DS14C202 Low Power +5V Powered EIA/TIA-232 Dual Driver/Receiver PrintDate=1998/06/22 PrintTime=10:23:04 42589 ds012622 Rev. No. 0 cmservProof 8 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.