DS131 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 18

Technical content

DS131 LUXEON Altilon H1K PnP Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT LUXEON Altilon H1K PnP is a fully integrated solution optimized for headlight applications, meeting both SAE and ECE color specifications. This solution minimizes time to market and simplifies supply chain by reducing optical and mechanical design efforts with electrical connectors. Combined with LUXEON Altilon LEDs, LUXEON Altilon H1K PnP provides the same powerful performance guaranteed by LUXEON LEDs. LUXEON Altilon H1K PnP Integrated functionality for headlight solutions FEATURES AND BENEFITS PRIMARY APPLICATIONS Easy plug and play design for a reduction in design costs Adaptive Lighting Industry’s lowest thermal resistance enables smaller heatsinks for smaller designs Front Fog Customizable interface, available with connector, flux bin resistor and thermistor Headlight Available in 1x4 and 1x5 configuration IEC-60810 qualified and PPAP documentation available

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON Altilon H1K PnP LEDs are tested and binned using a 20ms monopulse (MP) at 1000mA drive current at a case temperature, Tc, of 85°C. Part Number Nomenclature Part numbers for LUXEON Altilon H1K PnP follow the convention below: L A P H – M A B – C C C C Where: M – designates future product offerings A – designates number of chips (4 or 5) B – designates number of pins in connector C C C C – designates minimum flux bin Therefore, the following part number is used for a LUXEON Altilon H1K PnP 1x4 with a 6-pin connector and a minimum luminous flux of 1107 lumens: L A P H – M 4 6 – 1 1 0 7 Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Altilon H1K PnP is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). Figure 1 . Typical case temperature measurement location for LUXEON Altilon H1K PnP .

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product selection for LUXEON Altilon H1K PnP at 20ms MP, 1000mA, T c= 85°C . MINIMUM LUMINOUS FLUX [1] (lm) FORM FACTOR PART NUMBER [2] 1107 1x4 LAPH-M46-1107 1145 1x4 LAPH-M46-1145 1183 1x4 LAPH-M46-1183 1221 1x4 LAPH-M46-1221 1412 1x5 LAPH-M56-1412 1450 1x5 LAPH-M56-1450 1489 1x5 LAPH-M56-1489 1527 1x5 LAPH-M56-1527 Notes for Table 1: 1. Lumileds maintains a tolerance of ±10% on luminous flux measurements. 2. Each part number includes up to 4 luminous flux bins. Optical Characteristics Table 2 . Typical optical characteristics for LUXEON Altilon H1K PnP at 20ms MP, 1000mA, T c= 85°C . PART NUMBER CORRELATED COLOR TEMPERATURE (CCT) TYPICAL TOTAL INCLUDED ANGLE [1] θ0.90V TYPICAL VIEWING ANGLE [2] 2θ1/2 MINIMUM MAXIMUM LAPH-Mxx-xxxx 5500K 6250K 142° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3 . Typical electrical and thermal characteristics for LUXEON Altilon H1K PnP at 20ms MP, 1000mA, T c= 85°C . PART NUMBER FORWARD VOLTAGE [1] (Vf) MINIMUM Vf at 1500mA 130°C [2] (V) MAXIMUM Vf at 1500mA -40°C [3] (V) ELECTRICAL THERMAL RESISTANCE—JUNCTION TO CASE [4] (K/W) REAL THERMAL RESISTANCE— JUNCTION TO CASE [5] (K/W) MINIMUM MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM Notes for Table 3: 3. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 4. Product minimum Vf at 1500mA operation, Tc 130°C after 1,000 hours of operation at rated conditions. 5. Product maximum Vf at 1500mA operation, Tc -40°C after 1,000 hours of operation at rated conditions. 6. Rth j-c el: Electrical thermal resistance (junction to case). 7. Rth j-c real: Real thermal resistance (junction to case) with wall plug efficiency included (reference JESD51-51, JESD51-14, 4.1.3). 8. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. 9. Measured between 80°C and 90°C at binning current.

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 4 Absolute Ratings Table 4 . Absolute ratings for LUXEON Altilon H1K PnP . PARAMETER PERFORMANCE Minimum DC Forward Current 100mA Maximum DC Forward Current 1500mA Peak Pulsed Forward Current [3] 2000mA Maximum Transient Peak Current 2000mA for ≤10ms Maximum AC Ripple [2] 50mA rms at ≥10kHs LED Junction Temperature -40 to 150°C Maximum Junction Temperature for Short Time Applications (1500mA) [1] 175°C Maximum Operating Case Temperature at Test Current [1] 130°C Maximum Operating Case Temperature at Maximum Current [1] 130°C LED Storage Temperature 130°C ESD Sensitivity [4] ±8kV HBM, ±400V MM, ±2kV CDM Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum allowable. LUXEON Altilon H1K PnP LEDs driven at or above maximum LED case temperature may have a shorter lifetime. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

  • The frequency of the ripple current is 100Hz or higher
  • The average current for each cycle does not exceed the maximum allowable DC forward current
  • The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current 3. A 10% duty cycle with pulse width of 10ms. 4. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101). JEDEC Moisture Sensitivity Table 5 . Moisture sensitivity levels for LUXEON Altilon H1K PnP . LEVEL FLOOR LIFE STANDARD SOAK REQUIREMENTS TIME CONDITIONS TIME CONDITIONS

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 10 Product Bin and Labeling Definitions Designing with LUXEON Altilon H1K PnP Flux bins supportable for car programs depend on product color and program start- and end-of-production date. Flux roadmaps by year and product color are maintained and available from the sales representative. Please contact your local sales representative to request the flux bin range with best supportability for program timing. Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheets. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point or dominant wavelength and forward voltage. LUXEON Altilon H1K PnP LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A B – designates luminous flux bin (example: M1=1221 to 1260 lumens, Q2=1489 to 1527 lumens) C D – designates color bin (example: 1D, 2C, 3B, 4A) Therefore, a LUXEON Altilon H1K PnP with a lumen range of 1221 to 1260, and color bin of 3B has the following CAT code: M 1 3 B

color and platform start-of-production date. Contact your local sales representative for best supportability of programs. Table 6. Luminous flux bin definitions for LUXEON Altilon H1K PnP.

  1. Lumileds maintains a tolerance of ±10% on luminous flux measurements.

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 12 Color Codes Notes for Figure 8: 1. Lumileds supports the following bins for LUXEON Altilon H1K PnP: 1D, 2C, 3B and 4A. 2. LUXEON Altilon H1K PnP historical large color notations. Color bins must be ordered by fine bin designators, shown below.

  • H1 = 1A, 1B, 1C, 1D
  • H2 = 2A, 2B, 2C, 2D
  • H3 = 3A, 3B, 3C, 3D
  • H4 = 4A, 4B, 4C, 4D
  • HC = 1D, 2C, 3B, 4A 0.3 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 y x H4HC Figure 8 . Color bin structure in CIE 1931 color space for LUXEON Altilon H1K PnP at 20ms MP, 1000mA, T C=85°C .

Table 7. Color bin definitions for LUXEON Altilon H1K PnP at 20ms MP, 1000mA, T C=85°C .

  1. Lumileds maintains a tester tolerance of ±0.005 on x and y color coordinates.

Table 8. Laser marking definitions for LUXEON Altilon H1K PnP 1x2, 1x4 and 1x5.

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 14 Mechanical Dimensions Notes for Figure 9: 1. Components can be selected by the customer. 2. Please refer to your sales representative for recommendations and requirements. Lumileds provides the flexibility to our customers to add or remove components on the PCB; typical components are:

  • Thermistor – Protect module by detecting overheating and controlling current derating.
  • Bin Code Resistor – Enables driver to provide needed current according to flux bin for desired lumen output.
  • Grounding – Electrically conductive connection between PCB top side and Cu core through electrical via.
  • Enhanced ESD protection level – Provides ESD protection if the device is used in environments not ESD-protected, like repair shops.
  • Connector – To allow for an easy connection to the LED driver. Figure 9 . Example of PCB schematic for LUXEON Altilon H1K PnP .

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. 15 Notes for Figures 10 and 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. Tolerance, unless otherwise specified: ± 0.05 mm. 4. Materials: copper (base), ceramic (substrate). Figure 10 . Mechanical dimensions for LUXEON Altilon H1K PnP 1x4 (LAPH-M4x-xxxx) . 30.80 0.5 23.50 9.40 2.025 0.05 2.20 7.45 18 0.5 0.5 1.60 0.05 0 (2X) 2.025 0.05 3.20 0.05 0 (2X) A PCB blur <0.2 R1 R2 C1 C2 0.16 A Centre line of die array

0.1 A B

B A 5.7 5.8 0.8 16.6 1.70 2.40 0.1 6.40 0.5 8.2 12.70 4 3.70 B Keep Out area for SMD Keep Out area for connector pin 0.05 max Ra 1.6 16.20 Figure 11 . Mechanical dimensions for LUXEON Altilon H1K PnP 1x5 (LAPH-M5x-xxxx) . 30.80 0.5 23.50 9.40 2.025 0.05 2.20 7.45 18 0.5 0.5 1.60 0.05 0 (2X) 2.025 0.05 3.20 0.05 0 (2X) A PCB blur <0.2 R1 R2 C1 C2 0.2 A Centre line of die array B A 5.7 5.8 0.8 16.6 1.70 2.40 0.1 6.40 0.5 8.2 12.70 4 3.70 B Keep Out area for SMD Keep Out area for connector pin 0.05 max Ra 1.6 16.20

DS131 LUXEON Altilon H1K PnP Product Datasheet 20170531 ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com.