DS1308

DS1308 BRIDGELUX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 21

Technical content

Datasheet sections

The V Series™ LED Array products deliver high quality light in a compact and cost-effective solid-state lighting package. These chip on board (CoB) arrays can be efficiently driven more than two times the nominal drive current, enabling design flexibility not previously possible. These high flux density light sources are designed to support a wide range of high quality, low cost directional luminaires and replacement lamps for both interior and exterior commercial and residential applications. The Gen 9 V Series COB is a high efficacy product that uses narrow band red phosphor to significantly improve the spectrum efficacy. The improved spectrum efficacy results in the 80 CRI product of the Gen 9 Series delivering better or equivalent efficacy as that of our previous generation V Series product. The V15 LED Array is available in a variety of electrical, CCT, and CRI combinations providing substantial design flexibility and energy efficiency advantages. Lighting system designs incorporating these LED arrays deliver increased system level efficacy and a longer service life. Typical applications include replacement lamps and task, accent, spot, track, wide area, security, wall packs and down lights. V Series

Features

• Efficacy of 199 lm/W typical, 3000K 80 CRI
• Wide selection of CCT options (2700K-5000K) with minimum 80 CRI options
• Uniform high-quality illumination
• 2 and 3 SDCM binning options (2700K – 4000K)
• 3 and 4 SDCM binning options (5000K)
• Forward voltage bin codes and backside marking
• Instant light with unlimited dimming
• 5-Year warranty Benefits
• Enables high efficiency lighting systems and lower operating costs
• Supports the trend toward luminaire miniaturization and delivers enhanced optical control
• Design flexibility for a broad range of lighting

applications

• Clean white light without pixelation
• Uniform consistent white light
• Design flexibility for multi-source applications
• Easy to use with daylight and motion sensors to increase energy savings
• Design with confidence

The part number designation for Bridgelux V Series LED arrays is explained as follows: 1 2 3 4 5 6 7 8 9 10 11 – 12 – 13 14 Product Family CCT Bin Options 2 = 2 SDCM 3 = 3 SDCM 4 = 4 SDCM CRI E = 80 CRI min. Array Configuration 27 = 2,700K 30 = 3,000K 35 = 3,500K 40 = 4,000K 50 = 5,000K BXRE – 30 E 30F0 – D – 9 3 Gen. 9Nominal CCT Flux Indicator 30xx = 3000 lm Bridgelux arrays are fully engineered devices that provide consistent thermal and optical performance on an engineered mechanical platform. The V Series arrays are the most compact CoB devices across all of Bridgelux’s LED Array products. The arrays incorporate several features to simplify design integration and assembly. Please visit www.bridgelux.com for more information on the V Series family of products. Fully engineered substrate for consistent thermal, mechanical and optical properties Yellow phosphor Light Emitting Surface (LES) Note: Part number and lot codes are scribed on back of array Polarity symbols Solder Pads White ring around LES Case Temperature (Tc) Measurement Point Designed to comply with global safety standards for creepage and clearance distances

The following product configurations are available: Table 1: Selection Guide, Pulsed Measurement Data (Tj = Tc = 25°C) Part Number Nominal CCT1 (K) CRI2 Nominal Drive Current3 (mA) Typical Pulsed Flux4,5,6 Tc = 25ºC (lm) Minimum Pulsed Flux6,7 Tc = 25ºC (lm) Typical Vf (V) Typical Power (W) Typical Efficacy (lm/W) BXRE-27E30F0-D-9x 2700 80 600 3969 3572 33.9 20.3 195 BXRE-30E30F0-D-9x 3000 80 600 4050 3645 33.9 20.3 199 BXRE-35E30F0-D-9x 3500 80 600 4070 3663 33.9 20.3 200 BXRE-40E30F0-D-9x 4000 80 600 4091 3681 33.9 20.3 201 BXRE-50E30F0-D-9x 5000 80 600 4010 3609 33.9 20.3 197 Notes for Table 1: 1. Nominal CCT as defined by ANSI C78.377-2011. 2. CRI values are minimums and tested at Tj = Tc = 85°C. Minimum R9 value for 80 CRI products is 0.Bridgelux maintains a ± 3 tolerance on CRI and R9 values. 3. Drive current is referred to as nominal drive current. 4. Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tj (junction temperature) = Tc (case temperature) = 25°C. 5. Typical performance values are provided as a reference only and are not a guarantee of performance. 6. Bridgelux maintains a ±7% tolerance on flux measurements. 7. Minimum flux values at the nominal drive current are guaranteed by 100% test.

Table 2: Selection Guide, Stabilized DC Performance (Tc = 85°C) 4,5 Part Number Nominal CCT1 (K) CRI2 Nominal Drive Current3 (mA) Typical DC Flux4,5 Tc = 85ºC (lm) Minimum DC Flux6 Tc = 85ºC (lm) Typical Vf (V) Typical Power (W) Typical Efficacy (lm/W) BXRE-27E30F0-D-9x 2700 80 600 3651 3286 33.3 20.0 183 BXRE-30E30F0-D-9x 3000 80 600 3726 3353 33.3 20.0 186 BXRE-35E30F0-D-9x 3500 80 600 3745 3370 33.3 20.0 187 BXRE-40E30F0-D-9x 4000 80 600 3763 3387 33.3 20.0 188 BXRE-50E30F0-D-9x 5000 80 600 3689 3320 33.3 20.0 185 Notes for Table 2: 1. Nominal CCT as defined by ANSI C78.377-2011. 2. CRI values are minimums and tested at Tj = Tc = 85°C. Minimum R9 value for 80 CRI products is 0, Bridgelux maintains a ± 3 tolerance on CRI and R9 values. 3. Drive current is referred to as nominal drive current. 4. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance. 5. Typical performance is estimated based on operation under DC (direct current) with LED array mounted onto a heat sink with thermal interface material and the case temperature maintained at 85°C. Based on Bridgelux test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected. 6. Minimum flux values at elevated temperatures are provided for reference only and are not guaranteed by 100% production testing. Based on Bridgelux test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected.

European Product Registry for Energy Labeling The European Product Registry for Energy Labeling (EPREL) is defined in the EU Regulation 2017/1369 to provide import- ant energy efficiency information to consumers. Together with Energy Labeling Regulation ELR (EU) 2019/2015 which was amended by regulation (EU) 2021/340 for energy labelling of light sources, manufacturers are required to declare an ener- gy class based on key technical specifications from each of their product and register it in an open data base managed by EPREL It is now a legal requirement for a vendor of light sources to upload information about their products into the EPREL database before placing these products on the market in the EU. Table 3 below provides a list of part numbers that are in compliance with ELR and are currently listed in the EPREL data- base. At Bridgelux, we are fully committed to supplying products that are compliant with pertinent laws, rules, and obligation imposed by relevant government bodies including the European Energy Labeling regulation. Customers can use these products with full confidence for any projects that fall under the ELR. Table 3: Part numbers registered in European Product Registry for Energy Labeling PART NUMBER1 CCT (K) CRI Current2 (mA) Vf (V) Useful flux3 (Φuse) at 85C (lm) Pow- er (W) Efficacy (lm/W) Energy efficiency class4 Regis- tration No URL to Product Information Sheet in EPREL Database BXRE-27E30F0-D-93 2700 80 1440 37.5 7746 54 143 E 1702065 https:/ /eprel.ec.europa.eu/qr/1702065 BXRE-30E30F0-D-93 3000 80 1440 37.5 7904 54 146 D 1702080 https:/ /eprel.ec.europa.eu/qr/1702080 BXRE-35E30F0-D-93 3500 80 1440 37.5 7943 54 147 D 1702095 https:/ /eprel.ec.europa.eu/qr/1702095 BXRE-40E30F0-D-93 4000 80 1440 37.5 7984 54 148 D 1702110 https:/ /eprel.ec.europa.eu/qr/1702110 BXRE-50E30F0-D-94 5000 80 1440 37.5 7826 54 145 E 1702135 https:/ /eprel.ec.europa.eu/qr/1702135 Notes for Table 3: 1. All device listed here must be disposed as e-waste upon its end of life according to local country guideline in each country. 2. For information on performance values at alternative drive conditions. please refer to the Product Selection Guide, Absolute Maximum Rating Table and Performance Curves in this data sheet. 3. For a definition of useful luminous flux (ΦΦuse), please see the ELR regulations at https:/ /tinyurl.com/4b6zvt4m. 4. EPREL requires an arrow symbol containing the letter of the energy efficiency class to be displayed. on technical promotional material. Refer to this energy efficiency class column for specific energy efficiency class on each part number.

Performance at Commonly Used Drive Currents V Series LED arrays are tested to the specifications shown using the nominal drive currents in Table 1. V Series may also be driven at other drive currents dependent on specific application design requirements. The performance at any drive current can be derived from the current vs. voltage characteristics shown in Figure 1 and the flux vs. current characteristics shown in Figure 2. The performance at commonly used drive currents is summarized in Table 4. Table 4: Product Performance at Commonly Used Drive Currents Part Number CRI Drive Current1 (mA) Typical Vf Tc = 25ºC (V) Typical Power Tc = 25ºC (W) Typical Flux2 Tc = 25ºC (lm) Typical DC Flux3 Tc = 85ºC (lm) Typical Efficacy Tc = 25ºC (lm/W) BXRE-27E30F0-D-9x 80 100 31.1 3.1 671 623 216 200 31.7 6.3 1363 1271 215 400 32.9 13.2 2696 2500 205 600 33.9 20.3 3969 3651 195 900 35.2 31.7 5790 5260 183 1440 37.5 54.0 8899 7919 165 BXRE-30E30F0-D-9x 80 100 31.1 3.1 684 636 220 200 31.7 6.3 1391 1297 219 400 32.9 13.2 2751 2551 209 600 33.9 20.3 4050 3726 199 900 35.2 31.7 5908 5367 186 1440 37.5 54.0 9081 8081 168 BXRE-35E30F0-D-9x 80 100 31.1 3.1 688 639 221 200 31.7 6.3 1398 1303 220 400 32.9 13.2 2764 2564 210 600 33.9 20.3 4070 3745 200 900 35.2 31.7 5937 5394 187 1440 37.5 54.0 9126 8121 169 BXRE-40E30F0-D-9x 80 100 31.1 3.1 691 642 222 200 31.7 6.3 1404 1310 221 400 32.9 13.2 2778 2577 211 600 33.9 20.3 4091 3763 201 900 35.2 31.7 5967 5421 188 1440 37.5 54.0 9172 8162 170 BXRE-50E30F0-D-9x 80 100 31.1 3.1 678 629 218 200 31.7 6.3 1377 1284 217 400 32.9 13.2 2723 2526 207 600 33.9 20.3 4010 3689 197 900 35.2 31.7 5849 5314 185 1440 37.5 54.0 8990 8000 166 Notes for Table 4: 1. Alternate drive currents in Table 4 are provided for reference only and are not a guarantee of performance. 2. Bridgelux maintains a ± 7% tolerance on flux measurements. 3. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.

Electrical Characteristics

Table 5: Electrical Characteristics Part Number Drive Current (mA) Forward Voltage Pulsed, Tc = 25ºC (V) 1, 2, 3, 8 Typical Coefficient of Forward Voltage4 ∆Vf/∆Tc (mV/ºC) Typical Thermal Resistance Junction to Case5,6 Rj-c (ºC/W) Driver Selection Voltages7 (V) Minimum Typical Maximum Vf Min. Hot Tc = 105ºC (V) Vf Max. Cold Tc = -40ºC (V) BXRE-xxx30Fx-D-9x Notes for Table 5: 1. Parts are tested in pulsed conditions, Tc = 25°C. Pulse width is 10ms. 2. Voltage minimum and maximum are provided for reference only and are not a guarantee of performance. 3. Bridgelux maintains a tester tolerance of ± 0.10V on forward voltage measurements. 4. Typical coefficient of forward voltage tolerance is ± 0.1mV for nominal current. 5. Thermal resistance values are based from test data of a 3000K 80 CRI product. 6. Thermal resistance value was calculated using total electrical input power; optical power was not subtracted from input power. The thermal interface material used during testing is not included in the thermal resistance value. 7. Vf min hot and max cold values are provided as reference only and are not guaranteed by test. These values are provided to aid in driver design and selec- tion over the operating range of the product. 8. This product has been designed and manufactured per IEC 62031:2018.

Table 6: Eye Safety Risk Group (RG) Classifications Part Number Drive Current (mA) CCT4 2700K/3000K 3500K/4000K2 5000K3 BXRE-xxx30Fx-D-9x

950 RG1 RG1 RG1

1240 RG1 RG1 RG2

1440 RG1 RG2 RG2

Notes for Table 6: 1. Eye safety classification for the use of Bridgelux V Series LED arrays is in accordance with specification IEC/TR 62778: Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires. 2. For products classified as RG2 at 4000K, Ethr= 1860 lx. 3. For products classified as RG2 at 5000K Ethr= 1400 lx. 4. Please contact your Bridgelux sales representative for Ethr values at specific drive currents and CCTs not listed.

Table 7: Maximum Ratings Parameter Maximum Rating LED Junction Temperature (Tj) 150°C Storage Temperature1 -40°C to +105°C Operating Case Temperature2 (Tc) 105°C7 Soldering Temperature3 350°C or lower for a maximum of 6 seconds BXRE-xxx30Fx-D-9x Maximum Drive Current4 1440 mA Maximum Peak Pulsed Drive Current5 2050 mA Maximum Reverse Voltage6 -60V Notes for Table 7: 1. The Gen 9 product is robust enough to pass our internal humidity test but it is still more sensitive compared to regular LED array product The prod- uct needs to be stored in a dry environment. It is not recommended to use the product in a damp environment that directly exposes it to moisture. 2. For IEC 62717 requirement, please consult your Bridgelux sales representative. 3. Refer to Bridgelux Application Note AN101: Handling and Assembly of Bridgelux V Series LED Arrays 4. Arrays may be driven at higher currents however lumen maintenance may be reduced and warranty will not apply. 5. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 20 ms when operating LED Arrays at maximum peak pulsed current specified. Maximum peak pulsed currents indicate values where LED Arrays can be driven without catastrophic failures. 6. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. Maximum rating provided for reference only. 7. For good thermal management and to achieve optimal LED lifetime, please ensure that your thermal design accounts for the temperature of the light emitting surface (LES) to not exceed 140 deg C.

Note for Figure 7: 1. Characteristics shown for Warm White. Figure 7: V15D Drive Current vs. ccy Shift -0.0015 -0.001 -0.0005 0.0005 0.001 0.0015 0 400 800 1,200 1,600 ccy shift Current (mA)

Figure 10: Typical Color Spectrum Notes for Figure 10: 1. Color spectra measured at nominal current for Tj = Tc = 85°C. 2. Color spectra shown is 2700K and 80CRI. 3. Color spectra shown is 3000K and 80 CRI. 4. Color spectra shown is 3500K and 80 CRI. 5. Color spectra shown is 4000K and 80 CRI. 6. Color spectra shown is 5000K and 80 CRI. 0.0% 20.0% 40.0% 60.0% 80.0% 100.0% 120.0% 380 430 480 530 580 630 680 730 780 Normalized Intensity (%) Wavelength (nm) 2700K 3000K 3500K 4000K 5000K

Figure 11: Drawing for V15 LED Array Notes for Figure 11: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Solder pads are labeled “+” and “-“ to denote positive and negative polarity, respectively. 4. Unless otherwise specified, tolerances are ±0.1mm. 5. Refer to Application Notes AN101 for product handling, mounting and heat sink recommendations. 6. The optical center of the LED Array is nominally defined by the mechanical center of the array to a tolerance of ± 0.2mm. 7. Bridgelux maintains a flatness of 0.10mm across the mounting surface of the array.

Figure 12: Warm,Neutral and Cool White Test Bins in xy Color Space Color Binning Information Bin Code 2700K 3000K 3500K 4000K ANSI Bin (for reference only) (2580K - 2870K) (2870K - 3220K) (3220K - 3710K) (3710K - 4260K) 93 (3 SDCM) (2651K - 2794K) (2968K - 3136K) (3369K - 3586K) (3851K - 4130K) 92 (2 SDCM) (2674K - 2769K) (2995K - 3107K) (3404K - 3548K) (3895K - 4081K) Table 8: Warm and Neutral White xy Bin Coordinates and Associated Typical CCT (product is hot targeted to Tc = 85°C) Bin Code 5000K ANSI Bin (for reference only) (4745K - 5311K) 94 (4 SDCM) (4801K - 5282K) 93 (3 SDCM) (4835K - 5215K) Center Point (x,y) (0.3447, 0.3553) Table 9: Cool White xy Bin Coordinates and Associated Typical CCT (product is hot targeted to Tc = 85°C) Note: Pulsed Test Conditions, Tc = 85°C Note for Tables 8-9: 1. Bridgelux maintains a tolerance of +/- 0.007 on x and y color coordinates in the CIE 1931 color Space. 0.34 0.35 0.36 0.37 0.38 0.39 0.4 0.41 0.42 Y x 2SDCM 3SDCM 4SDCM Black Body Curve 2700k 3000k 3500k 4000k 5000k

Figure 13: V15 Packaging Tubes Notes for Figure 13: 1. Each tube holds 25 V15 COB arrays. 2. One tube is sealed in an anti-static bag. Four bags are placed in a shipping box. Depending on quantities ordered, a bigger shipping box, containing four boxes may be used to ship products. 3. Each bag and box is to be labeled as shown above. box are 58.7 x 13.3 x 7.9 cm.

Figure 14: Gen. 9 Product Labeling Bridgelux COB arrays have laser markings on the back side of the substrate to help with product identification. In addition to the product identification markings, Bridgelux COB arrays also contain markings for internal Bridgelux manufacturing use only. The image below shows which markings are for customer use and which ones are for Bridgelux internal use only. The Bridgelux internal manufacturing markings are subject to change without notice, however these will not impact the form, function or performance of the COB array. Customer Use- 2D Barcode Scannable barcode provides product part number and other Bridgelux internal production information. Customer Use- Product part number Customer Use- Vf Bin Code included to enable greater luminaire design flexibility. Refer to AN92 for bin code definitions. 30E3000D 93 2F Internal Bin Code

Bridgelux has developed a comprehensive set of application notes and design resources to assist customers in successfully designing with the V Series product family of LED array products. For all available application notes visit www.bridgelux.com. Optical Source Models Optical source models and ray set files are available for all Bridgelux products. For a list of available formats, visit www.bridgelux.com. MINOR PRODUCT CHANGE POLICY The rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization. CAUTION: CHEMICAL EXPOSURE HAZARD Exposure to some chemicals commonly used in luminaire manufacturing and assembly can cause damage to the LED array. Please consult Bridgelux CAUTION: RISK OF BURN Do not touch the V Series LED array during operation. Allow the array to cool for a sufficient period of time before handling. The V Series LED array may reach elevated temperatures such that could burn skin when touched. 3D CAD Models Three dimensional CAD models depicting the product outline of all Bridgelux V Series LED arrays are available in both IGS and STEP formats. Please contact your Bridgelux sales representative for assistance. LM80 LM80 testing has been completed and the LM80 report is now available. Please contact your Bridgelux sales representative for LM-80 report. STANDARD TEST CONDITIONS Unless otherwise stated, array testing is performed at the nominal drive current. CAUTION CONTACT WITH LIGHT EMITTING SURFACE (LES) Avoid any contact with the LES. Do not touch the LES of the LED array or apply stress to the LES (yellow phosphor resin area). Contact may cause damage to the LED array. Optics and reflectors must not be mounted in contact with the LES (yellow phosphor resin area).

About Bridgelux: Bridging Light and Life™ © 2023 Bridgelux, Inc. All rights reserved. Product specifications are subject to change without notice. Bridgelux, the Bridgelux stylized logo design and Vero are registered trademarks, V Series and Decor Series are trademarks of Bridgelux, Inc. All other trademarks are the property of their respective owners. Bridgelux GEN9 V15 Array Series Product Data Sheet DS1308 Rev. B (10/2023)

46410 Fremont Boulevard

Fremont, CA 94538 U.S.A. Tel (925) 583-8400 www.bridgelux.com At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, deliver- ing products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires. For more information about the company, please visit bridgelux.com twitter.com/Bridgelux facebook.com/Bridgelux youtube.com/user/Bridgelux linkedin.com/company/bridgelux-inc-_2 WeChat ID: BridgeluxInChina